1. Производ је готовview
The KOKKO FCP2 Compressor Guitar Pedal is a mini effect processor featuring a fully analog circuit and true bypass. Designed for both guitar and bass, it offers a broader adjustable range for compression effects. Its compact size and durable aluminum alloy construction make it suitable for various setups.
Figure 1: KOKKO FCP2 Compressor Guitar Pedal
Садржај пакета:
- 1 x KOKKO FCP2 Compressor Guitar Effect Pedal
- 1 x Упутство за употребу (енглески)
2. Подешавање
2.1 Напајање
The KOKKO FCP2 pedal requires an external AC adapter (not included) delivering 9V DC regulated power with a minimum of 300mA. Ensure the adapter has a center-negative polarity. Connect the power adapter to the 'Power In' jack located at the top of the pedal.
Figure 2: Power Input Location
2.2 Connecting to Your Instrument and Ampлифиер
- Connect your guitar or bass to the 6.35mm Input jack on the right side of the pedal using a standard instrument cable.
- Connect the 6.35mm Output jack on the left side of the pedal to your amplifier or other effects pedals using another standard instrument cable.
- Ensure all connections are secure before powering on the pedal.
Figure 3: Input and Output Connections
3. Упутство за употребу
The KOKKO FCP2 Compressor pedal features three control knobs and a footswitch for activation.
Figure 4: Pedal Controls
3.1 Контроле
- Дугме за одржавање: Controls the amount of compression applied to the signal. Turning it clockwise increases sustain and compression.
- Дугме ЛЕВЕЛ: Adjusts the overall output volume of the pedal. Use this to match the volume of your compressed signal to your bypassed signal, or to provide a boost.
- Дугме за НАПАД: Determines how quickly the compressor reacts to the initial transient of your notes. A lower attack setting (counter-clockwise) allows more of the initial pick attack to pass through before compression engages, resulting in a punchier sound. A higher attack setting (clockwise) compresses the initial attack more quickly, leading to a smoother, more even tone.
- ножни прекидач: Toggles the effect on or off.
- ЛЕД индикатор: Светли када је ефекат активан.
3.2 Основни рад
- After connecting the pedal and power supply, press the footswitch to activate the effect. The LED indicator will light up.
- Start with the SUSTAIN and ATTACK knobs at a moderate position (e.g., 12 o'clock) and the LEVEL knob set to unity gain (where the effect on volume matches the bypassed volume).
- Adjust the SUSTAIN knob to achieve the desired amount of compression and sustain.
- Experiment with the ATTACK knob to fine-tune how the compressor responds to your playing dynamics.
- Use the LEVEL knob to adjust the overall output volume to your preference.
4. Одржавање
To ensure the longevity and optimal performance of your KOKKO FCP2 Compressor pedal, follow these maintenance guidelines:
- Clean the pedal regularly with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Keep the pedal free from dust and debris.
- Чувајте педалу на хладном и сувом месту када је не користите.
- Do not attempt to disassemble the pedal yourself, as this may void the warranty and cause damage.
КСНУМКС. Решавање проблема
If you encounter issues with your KOKKO FCP2 Compressor pedal, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| No sound when pedal is on. | Неисправно напајање, лабави каблови, заобиђена педала. | Ensure 9V DC center-negative power supply is connected. Check all instrument cables are securely plugged in. Press footswitch to engage effect (LED should light up). |
| Слаб или изобличен звук. | Incorrect knob settings, faulty cables. | Adjust LEVEL, SUSTAIN, and ATTACK knobs. Test with different cables. |
| LED not lighting up. | No power, faulty LED. | Verify power supply connection and specifications. If power is confirmed, the LED may be faulty (contact support). |
| Excessive noise or hum. | Ground loop, interference, faulty power supply. | Use a high-quality, isolated power supply. Ensure all equipment is properly grounded. Try moving the pedal away from other electronic devices. |
6. Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | КОККО |
| Модел | FCP2 COMPRESSOR (Mini) |
| Главни материјал | Алуминијумска легура |
| Инпут Импеданце | КСНУМКСМ Охмс |
| Излазна импеданса | 10К Охмс |
| Повер Суппли | External AC adapter 9V DC regulated, minimum 300mA (center negative) |
| Величина артикла | 9.4 цм x 5.1 цм x 5.3 цм (3.7 x 2.01 x 2.09 инча) |
| Тежина артикла | 180g (6.3 Ounces) |
| Формат сигнала | Аналог |
| Ефекти аудио излаза | Компресија |
| Цонтролс Типе | Кноб |
| Тип конектора | Barrel Connector (Power) / 1/4-inch Audio (Input/Output) |
Figure 5: Pedal Dimensions
7. Гаранција
The KOKKO FCP2 Compressor Guitar Pedal comes with a 1-year warranty. Please retain your purchase receipt for warranty claims. For detailed warranty terms and conditions, please refer to the official KOKKO webсајту или контактирајте корисничку подршку.
8. Важне сигурносне напомене
- Do not use the pedal in high temperature, high humidity, or subzero environments.
- Avoid using the pedal in direct sunlight.
- Do not disassemble the pedal yourself.
- Сачувајте ово упутство за будућу употребу.