BMC RESmart GII Auto CPAP E-20A-H with Humidifier User Manual

1. Увод

This manual provides essential information for the safe and effective operation, setup, and maintenance of your BMC RESmart GII Auto CPAP System E-20A-H with Humidifier. Please read this manual thoroughly before using the device and retain it for future reference. This device is intended for the treatment of Obstructive Sleep Apnea (OSA).

2. Безбедносне информације

Важна безбедносна упозорења:

• Always disconnect the device from the power supply before cleaning or performing any maintenance.
• Не урањајте уређај у воду или било коју другу течност.
• Use only accessories and parts recommended by BMC.
• Keep the device away from direct sunlight, heat sources, and sharp objects.
• Consult your physician or healthcare provider if you experience any unusual symptoms or discomfort during use.
• Овај уређај није намењен за одржавање живота.

3. Производ је готовview

The BMC RESmart GII Auto CPAP System E-20A-H is an intelligent device designed for the treatment of Obstructive Sleep Apnea. It features an integrated humidifier for enhanced comfort.

Кључне компоненте:

• Главна јединица: Houses the motor, control electronics, and display.
• Овлаживач: Integrated unit with dual water chambers for efficient humidification.
• ЛЦД екран од 3.5 инча: Provides real-time information and access to settings.
• Контролна типка: За навигацију кроз меније и подешавање подешавања.
• Излаз ваздуха: Connects to the CPAP tubing.
• Улаз за напајање: За повезивање адаптера за напајање.
• Слот за СД картицу: For compliance data storage and retrieval (iCode II).
• SpO2 Kit Port (Optional): For real-time blood oxygen saturation and pulse rate monitoring.

An image showing the BMC RESmart GII Auto CPAP device, featuring its main unit, control knob, and integrated humidifier. The device is black with a clear humidifier chamber visible.

4. Подешавање

4.1 Распакивање

1. Пажљиво уклоните све компоненте из паковања.
2. Inspect the device and accessories for any signs of damage. Do not use if damaged.

4.2 Повезивање напајања

1. Connect the power adapter to the power inlet on the back of the device.
2. Укључите кабл за напајање у одговарајућу електричну утичницу.

4.3 Filling the Humidifier

1. Open the humidifier chamber by sliding or lifting the cover.
2. Fill the water chamber with distilled water up to the maximum fill line. Do not overfill.
3. Close the humidifier chamber securely.

4.4 Connecting Tubing and Mask

1. Connect one end of the CPAP tubing to the air outlet on the device.
2. Connect the other end of the tubing to your prescribed CPAP mask.
3. Fit the mask comfortably and securely according to its own instructions.

5. Упутство за употребу

5.1 Почетак терапије

1. Ensure the device is properly set up and connected.
2. Ставите своју маску.
3. Press the Start/Stop button (usually the control knob) to begin therapy. The device will automatically start delivering air.

5.2 Подешавање подешавања

Use the control knob to navigate the menu on the 3.5-inch LCD display. Press the knob to select an option and rotate to adjust values.

• Опсег притиска: 4-20 cm H2O (Auto CPAP adjusts automatically within this range).
• Ramp време: Adjusts the time (0-60 minutes) for the pressure to gradually increase to the prescribed level.
• Humidification Level: Select from Off or levels 1-5 to control the humidity output.
• Reslex: Pressure relief feature (Off/1/2/3) for exhalation comfort.
• Аутоматско укључивање/искључивање: Can be enabled or disabled (Off by default).

5.3 Прекид терапије

Press the Start/Stop button again to end therapy. The device will power down.

5.4 iCode II Data Retrieval

Compliance data is encoded by a QR code displayed on the device's screen. Use a compatible application to scan the QR code for quick data retrieval and monitoring.

6. Одржавање

Regular cleaning and maintenance are crucial for the optimal performance and longevity of your device.

6.1 Дневно чишћење

• Humidifier Water Chamber: Empty any remaining water and rinse with distilled water. Allow to air dry.
• маска: Wipe down the mask cushion with a damp cloth or specialized CPAP wipes.

6.2 Недељно чишћење

• Humidifier Water Chamber: Wash with mild soap and warm water. Rinse thoroughly and allow to air dry completely.
• CPAP цев: Wash with mild soap and warm water. Rinse thoroughly and hang to air dry.
• Ваздушни филтер: Inspect the reusable air filter (if applicable). If dirty, rinse under running water and allow to air dry. Replace disposable filters as recommended.

6.3 Општа нега

• Обришите спољашњост уређаја са огласомamp cloth. Do not use abrasive cleaners or immerse the device.
• Replace air filters regularly as per manufacturer recommendations or if visibly dirty.

КСНУМКС. Решавање проблема

Ако наиђете на проблеме, погледајте следеће уобичајене проблеме и решења:

If the problem persists, contact your healthcare provider or the manufacturer's customer support.

8. Спецификације

9. Гаранција и подршка

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support, service, or questions regarding your BMC RESmart GII Auto CPAP System, please contact the seller or the manufacturer directly.