Benetech GT235 Film/Coating Thickness Gauge User Manual

1. Увод

The Benetech GT235 Film/Coating Thickness Gauge is designed for quick and effective measurement of coating thickness. It accurately measures non-metallic coatings on non-magnetic metal substrates and non-magnetic coatings on magnetic metal substrates. The device automatically identifies the substrate type (magnetic or non-magnetic). This instrument is suitable for applications in automobile manufacturing, metal processing, chemical industry, and commodity inspection.

This manual provides detailed instructions for the proper use, setup, operation, and maintenance of your GT235 thickness gauge. Please read it thoroughly before operating the device.

2. Производ је готовview

The GT235 thickness gauge offers a range of features to ensure precise and versatile measurements.

Кључне карактеристике:

• Measures non-magnetic coating thickness on magnetic metal substrates.
• Measures non-metallic coating thickness on non-magnetic metal substrates.
• Automatic identification of magnetic (Fe) and non-magnetic (NFe) metal substrates.
• Supports single measurement, continuous measurement and differential measurement modes.
• Offers Zero-point calibration, Offset Calibration, and basic calibration options.
• Switchable metric (µm, mm) and imperial (mil) units of measurement.
• Automatic shutdown feature to conserve battery life.

Компоненте уређаја:

Слика 2.1: Фронт view of the GT235 gauge. The display shows measurement readings and indicators. Buttons for UNIT, MODE, and CAL are visible below the display.

Слика 2.2: Назад view of the GT235 gauge, illustrating the battery compartment.

Слика 2.3: Package contents, including the GT235 device, instruction manual, calibration foils, and AAA batteries.

3. Подешавање

3.1 Инсталација батерије

1. Пронађите одељак за батерију на задњој страни уређаја (погледајте слику 2.2).
2. Отворите поклопац одељка за батерије.
3. Уметните две батерије од 1.5 V AAA, водећи рачуна о исправном поларитету (+/-).
4. Добро затворите поклопац одељка за батерије.

3.2 Укључивање/искључивање

• To power on, press any button. The device will perform a self-test and display the last measurement mode.
• The device features an automatic shutdown function to save power. It will power off after a period of inactivity.

4. Упутство за употребу

4.1 Основна мерења

1. Уверите се да је уређај укључен.
2. Place the probe perpendicularly and firmly onto the surface of the coated material.
3. The measurement reading will be displayed on the screen. The device will automatically identify the substrate type (Fe for magnetic, NFe for non-magnetic).
4. Lift the probe from the surface to prepare for the next measurement.

4.2 режима мерења

Притисните тастер МОДЕ button to cycle through different measurement modes:

• Single Measurement (SNG): Displays one measurement at a time.
• Continuous Measurement (CONT): Continuously takes and displays measurements as the probe is moved across the surface.
• Differential Measurement (DIF): Measures the difference between the current reading and a set reference value.

4.3 Избор јединице

Притисните тастер УНИТ button to switch between metric (µm, mm) and imperial (mil) units. The selected unit will be displayed on the screen.

4.4 Калибрација

Calibration ensures measurement accuracy. It is recommended to calibrate the device when using it in different environments or if significant temperature differences occur.

1. Zero-point Calibration:
   • Place the probe directly on a bare, uncoated metal substrate (magnetic or non-magnetic, depending on the measurement type).
   • Притисните и држите ЦАЛ button until "0.0" or "CAL" appears, indicating zero calibration is complete.
2. Калибрација офсета:
   • Perform zero-point calibration first.
   • Place a calibration foil of known thickness on the bare substrate.
   • Place the probe on the calibration foil.
   • Adjust the displayed value to match the known thickness of the foil using the UNIT/MODE buttons (if applicable, specific steps may vary by firmware).
   • Потврдите калибрацију.
3. Basic Calibration:
   • This typically involves calibrating with multiple known thickness foils across the measurement range. Refer to the specific calibration kit instructions for detailed steps.

5. Одржавање

5.1 Чишћење

• Wipe the device body with a soft, dry cloth.
• Не користите абразивна средства за чишћење или раствараче, јер могу оштетити цasinг или приказ.
• Keep the probe tip clean and free from debris to ensure accurate measurements.

5.2 Складиштење

• Када се не користи дуже време, извадите батерије да бисте спречили цурење.
• Store the device in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.

5.3 Замена батерије

• Када се на екрану појави индикатор празне батерије, одмах замените обе ААА батерије.
• Пратите кораке за инсталацију батерије наведене у одељку 3.1.

КСНУМКС. Решавање проблема

7. Спецификације

8. Гаранција и подршка

За информације о гаранцији, техничку подршку или упите у вези са сервисирањем, обратите се директно продавцу или произвођачу. Сачувајте рачун о куповини као доказ о куповини.