Solus SPC-320 Dusk-to-Dawn Photocell Sensor

Увод

The Solus SPC-320 Dusk-to-Dawn Photocell Sensor is designed to automate the operation of your outdoor lighting. This sensor detects ambient light levels, automatically turning your light fixture on at dusk and off at dawn, providing convenience and energy efficiency. It features an Ezee Change Plug for simplified replacement and is suitable for 3-inch lamp постова.

Безбедносне информације

• Увек искључите напајање на прекидачу пре инсталације или сервисирања.
• Инсталацију треба да изврши квалификовани електричар или у складу са локалним електричним прописима.
• Уверите се да су сви жичани спојеви безбедни и правилно изоловани.
• Do not immerse the photocell sensor in water.
• Проверите волtagе и ватtage ratings of your fixture are compatible with the sensor.

Партс Инцлудед

• Photocell Photo Control Light Sensor
• Light Shield (optional)
• Монтажни завртњи
• Жичане матице

Спецификације

Упутство за инсталацију

This sensor is designed for easy installation into 3-inch lamp posts with a 1.375-inch diameter mounting hole. The Ezee Change Plug simplifies future replacements.

1. Искључите напајање: Before beginning any installation, ensure power to the lamp post is turned off at the circuit breaker.
2. Припремите место за монтажу: If replacing an existing sensor, carefully remove the old unit. Ensure the mounting hole in the lamp post is approximately 1.375 inches (1 3/8 inches) in diameter.
3. Жичне везе: The sensor comes with an Ezee Change Plug and a wiring harness. If your existing setup does not have this plug, you will need to hardwire the harness first. Refer to the wiring diagram below for correct connections. Use the provided wire nuts to secure connections.
   • Повежите црвена жица from the photo-control to the black wire of the light fixture.
   • Повежите црна жица from the photo-control to the black (supply) wire.
   • Повежите се all white wires together (neutral).
   • Повежите се green or bare wires together (земља).
4. Повежите сензор: Once the harness is wired, plug the photocell sensor into the Ezee Change Plug connector.
5. Монтажни сензор: Insert the sensor into the mounting hole on the lamp post. Secure it using the provided mounting screws. Ensure the sensor face is unobstructed and points towards an open sky area for optimal light detection.
6. Optional Light Shield: If the sensor is exposed to direct artificial light sources at night (e.g., streetlights, porch lights) that might interfere with its operation, install the optional light shield to prevent premature turn-off.
7. Врати снагу: Када је инсталација завршена и сви прикључци су безбедни, вратите напајање на прекидачу.

Дијаграм ожичења

Операција

Once installed and powered, the Solus SPC-320 Photocell Sensor will operate automatically. The built-in photocell detects the absence of sufficient natural light at dusk and activates the connected light fixture. Conversely, at dawn, when sufficient natural light is detected, the sensor will deactivate the light fixture. No manual intervention is required.

The sensor is compatible with various lighting types, including incandescent (up to 300W), LED (up to 60W), fluorescent (up to 39W), and HID (up to 100W) fixtures, making it versatile for residential and commercial applications.

Одржавање

The Solus SPC-320 Photocell Sensor requires minimal maintenance. Periodically inspect the sensor's face to ensure it is clean and free from dirt, debris, or obstructions that could interfere with light detection. Gently wipe the sensor with a soft, damp cloth if cleaning is necessary. Do not use abrasive cleaners.

Гаранција

The Solus SPC-320 Dusk-to-Dawn Photocell Sensor is backed by a 5-year warranty, providing peace of mind regarding its quality and durability.