VOX VX50AG 50-Watt Acoustic Guitar AmpЛифиер Упутство за употребу

1. Увод

The VOX VX50AG is a compact and powerful 50-watt acoustic guitar amplifier designed for clear and natural sound reproduction. Featuring a NuTube-equipped preamp, an 8-inch coaxial speaker with a tweeter, and a bass reflex structure, it delivers rich low-end and detailed highs. This amplifier includes dedicated channels for instruments and microphones, each with independent controls and effects, making it suitable for various performance and practice scenarios. This manual provides essential information for the safe and effective use of your VX50AG ampлифиер.

Слика 1.1: Предња страна view of the VOX VX50AG ampлифиер. Тхе amplifier has a brown and black finish with a black speaker grille and the VOX logo.

2. Карактеристике

• 50 watts of output power for clear and robust sound.
• NuTube-equipped preamp for warm, tube-like tone.
• 8-inch coaxial speaker with a tweeter for full-range audio.
• Bass reflex structure enhances low-frequency response.
• Independent Instrument and Mic channels, each with dedicated volume, EQ, and effects controls.
• Phase switch on the Instrument channel to reduce feedback.
• Mic channel provides phantom power for condenser microphones.
• Comprehensive input/output jacks including Aux In, Phones Out, and Line Out.

3. Контроле и везе

3.1 Контроле на предњој плочи

The front panel provides access to all primary controls for both the Instrument and Mic channels, as well as master volume and effects.

Слика 3.1: Детаљно view оф тхе amplifier's control panel, showing knobs and input jacks.

• Instrument Input (1/4" Jack): Connect your acoustic guitar or other instrument.
• Instrument Channel Controls:
  • ВОЛУМЕ: Adjusts the volume of the instrument channel.
  • PHASE Switch: Helps reduce feedback by inverting the phase of the input signal.
  • БАСС, СРЕДЊИ, ВИСОК: 3-band equalizer for shaping the instrument's tone.
  • EFFECTS (CHORUS, REVERB, DELAY): Select and adjust the intensity of built-in effects.
• Mic Input (XLR Jack): Повежите микрофон.
• Mic Channel Controls:
  • ВОЛУМЕ: Adjusts the volume of the microphone channel.
  • PHANTOM Power Switch: Activates +48V phantom power for condenser microphones.
  • БАСС, ТРЕБЛЕ: 2-band equalizer for shaping the microphone's tone.
  • РЕВЕРБ: Adjusts the reverb effect for the microphone channel.
• МАСТЕР: Overall volume control for the ampлифиер.
• AUX IN (3.5mm Stereo Jack): Connect external audio devices like MP3 players.
• PHONES OUT (3.5mm Stereo Jack): Connect headphones for silent practice.
• Прекидач: Окреће amplifier uključen ili isključen.

3.2 Прикључци задње плоче

The rear panel houses essential power and output connections.

Слика 3.2: Позади view of the VOX VX50AG amplifier, displaying the DC 19V input and LINE OUT jack.

• ДЦ 19В улаз: Connect the included AC adapter here. Use only the specified adapter.
• LINE OUT (1/4" Jack): Connect to a PA system, mixer, or recording device.

4. Подешавање

1. Распакивање: Carefully remove the amplifier from its packaging. Retain all packaging materials for future transport or storage.
2. Повер Цоннецтион:
   • Осигурајте amplifier's POWER switch is in the OFF position.
   • Connect the included AC adapter to the DC 19V input on the rear panel.
   • Plug the AC adapter into a suitable power outlet.
3. Повезивање инструмента:
   • Connect your acoustic guitar or other instrument to the INSTRUMENT input jack on the front panel using a standard 1/4" instrument cable.
4. Повезивање микрофона:
   • Connect your microphone to the MIC input jack on the front panel using an XLR cable.
   • If using a condenser microphone requiring phantom power, ensure the PHANTOM power switch is set to ON. For dynamic microphones, leave it OFF.
5. Почетно укључивање:
   • Before turning on, set all VOLUME and MASTER knobs to their minimum (counter-clockwise) positions.
   • Притисните прекидач ПОВЕР да укључите amplifier. The power indicator will illuminate.
   • Gradually increase the MASTER volume and individual channel volumes to a desired listening level.

5. Упутство за употребу

5.1 Adjusting Instrument Channel Sound

• Волуме: Use the INSTRUMENT VOLUME knob to set the input level for your instrument. Adjust until the "CLIP" indicator flashes only occasionally during the loudest playing.
• EQ: Use the BASS, MIDDLE, and TREBLE knobs to shape the tonal characteristics of your instrument. Experiment to find the desired sound.
• Пхасе Свитцх: If you experience feedback, especially at higher volumes, try pressing the PHASE switch to invert the signal's phase. This can often eliminate or reduce feedback.
• Ефекти: Turn the EFFECTS knob to select between CHORUS, REVERB, or DELAY. The knob also controls the intensity of the selected effect.

5.2 Adjusting Microphone Channel Sound

• Волуме: Use the MIC VOLUME knob to set the input level for your microphone. Adjust until the "CLIP" indicator flashes only occasionally during the loudest vocal or instrument input.
• Пхантом Повер: If your condenser microphone requires +48V phantom power, ensure the PHANTOM switch is ON. For dynamic microphones, keep it OFF.
• EQ: Use the BASS and TREBLE knobs to adjust the tonal balance of your microphone signal.
• Реверб: Use the MIC REVERB knob to add and adjust the intensity of the reverb effect to your microphone signal.

5.3 Master Volume and Outputs

• MASTER Volume: This knob controls the overall output volume of the amplifier. Adjust it to control the final loudness.
• АУКС ИН: Connect an external audio player to the AUX IN jack to play along with backing tracks. The volume of the auxiliary input is controlled by the external device.
• ПХОНЕС ОУТ: Connect headphones to this jack for private practice. When headphones are connected, the main speaker output is muted.
• ЛИНЕ ОУТ: Use the LINE OUT jack to send the mixed signal of both channels to an external PA system, mixer, or recording interface.

6. Одржавање

• Чишћење: Обришите amplifier's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
• Складиштење: Чувајте amplifier in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Транспорт: When transporting the amplifier, ensure it is powered off and disconnected from all cables. Use the integrated handle for carrying.
• Вентилација: Ensure proper ventilation around the ampспасилац. Не блокирајте вентилационе отворе.
• Повер Цорд: Regularly inspect the power cord for any damage. If damaged, replace it with an authorized VOX replacement.

КСНУМКС. Решавање проблема

8. Спецификације

Image 8.1: Diagram showing the dimensions of the VOX VX50AG amplifier: 12.32" height, 8.19" depth, 13.94" width.

9. Безбедносне информације

Please read and follow these safety precautions to prevent damage to the product or injury to yourself and others.

• Не излажите овај уређај киши или влази.
• Не постављајте предмете напуњене течношћу, као што су вазе, на јединицу.
• Не блокирајте отворе за вентилацију. Инсталирајте у складу са упутствима произвођача.
• Не постављајте у близини извора топлоте као што су радијатори, грејни регистри, пећи или други уређаји (укључујући ampлифиерс) који производе топлоту.
• Користите само додатке/прибор које је навео произвођач.
• Искључите ову јединицу из струје током олуја са грмљавином или када се не користи дуже време.
• Упућивање свих сервиса квалификованом сервисном особљу. Сервисирање је потребно ако је апарат на било који начин оштећен.

10. Гаранција и подршка

For detailed warranty information, product registration, and technical support, please visit the official VOX website or contact your local VOX distributor. Keep your purchase receipt as proof of purchase for warranty claims.

Official VOX Webсајт: ввв.вокampс.цом