Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo - Instruction Manual

1. Увод

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.

2. Општа безбедносна упутства

Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.

• Безбедност на радном месту: Радно место одржавајте чистим и добро осветљеним. Неред или тамна места могу изазвати несреће. Немојте користити електричне алате у експлозивним атмосферама, као што је присуство запаљивих течности, гасова или прашине.
• електрична безбедност: Избегавајте контакт тела са уземљеним или уземљеним површинама као што су цеви, радијатори, пећи и фрижидери. Постоји повећан ризик од струјног удара ако је ваше тело уземљено.
• Лична безбедност: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
• Употреба и одржавање алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Он ће посао обавити боље и безбедније брзином за коју је дизајниран. Искључите батерију из електричног алата пре него што извршите било каква подешавања, промените додатну опрему или складиштите електрични алат.
• Употреба и одржавање батеријског пакета: Пуните само пуњачем који је одредио произвођач. Пуњач који је погодан за једну врсту батерије може да створи опасност од пожара када се користи са другом батеријом. Користите електричне алате само са посебно одређеним батеријама.

3. Производ је готовview и карактеристике

The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.

• Излаз високог обртног момента: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
• Контрола променљиве брзине: Electronic speed control allows for precise adjustment, ideal for delicate applications.
• 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
• Интегрисано ЛЕД осветљење: Three power LEDs provide optimal illumination of the work area.
• Ергономски дизајн: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
• Издржљива конструкција: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
• Копча на каишу: A practical belt clip is included for convenient carrying and access during work.

Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).

4. Подешавање

4.1 Инсталација батерије (батерија и пуњач се продају засебно)

1. Ensure the battery is fully charged using an Einhell Power X-Change charger.
2. Align the battery pack with the base of the impact driver.
3. Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
4. To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.

4.2 Уметање и вађење бита

The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.

1. Pull the quick-change chuck sleeve forward.
2. Insert the hexagon bit fully into the chuck.
3. Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
4. To remove the bit, pull the sleeve forward again and extract the bit.

Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.

5. Упутство за употребу

5.1 Укључивање/искључивање и контрола брзине

• Почети: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
• Подешавање брзине: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
• Да се ​​заустави: Отпустите прекидач за укључивање/искључивање.

5.2 Смер ротације

The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.

• Forward Rotation (Screwing In): Push the selector switch to the left.
• Reverse Rotation (Screwing Out): Push the selector switch to the right.
• Lock Position: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.

5.3 Using the Impact Driver

• Select the appropriate impact-resistant bit for your screw type and material.
• Position the bit firmly on the screw head.
• Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
• Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.

Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.

6. Одржавање

Редовно одржавање осигурава дуготрајност и оптималне перформансе вашег ударног одвијача.

• Чишћење: Након сваке употребе, очистите кућиште алата меком,amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
• Складиштење: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
• инспекција: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.

КСНУМКС. Решавање проблема

8. Спецификације

9. Гаранција и подршка

Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webсајту.

The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.