Elitech BT-3 Digital Hygrometer Thermometer Instruction Manual

Увод

This manual provides comprehensive instructions for the Elitech BT-3 Digital Hygrometer Thermometer. This device is designed to accurately monitor both indoor and outdoor temperature, as well as indoor humidity levels, offering essential environmental data for various settings.

Карактеристике производа

• Дигитални термометар: Monitors indoor and outdoor temperature in both Fahrenheit (℉) and Celsius (℃). The measuring range is -58℉ to +158℉.
• Humidity Monitor: Measures indoor relative humidity (RH) within a range of 20% to 99%RH.
• MAX & MIN Records: Automatically stores and displays the maximum and minimum recorded values for indoor/outdoor temperature and indoor humidity.
• Clock Function and Alarming Function: Features a switchable 12 or 24-hour clock display and a settable alarm time.
• Three Mounting Options: Designed for versatility with tabletop, wall-mountable, and magnet-mountable options, allowing convenient placement.
• Индикатор удобности ваздуха: Displays the comfort level (DRY/COMFORT/WET) based on current indoor humidity, providing a quick assessment of air conditions.

Изглед уређаја

Слика 1: Фронт view of the Elitech BT-3 unit, showing the LCD display with indoor/outdoor temperature, time, and humidity readings. Dimensions are indicated as 111mm height, 101mm width, and 23.5mm depth. A "MAX/MIN" button is visible at the bottom.

Слика 2: Позади view of the Elitech BT-3 unit, showing the battery compartment cover and control buttons: MODE, ADJ, CLEAR, RESET, and a ℃/℉ switch. A keyhole slot for wall mounting is also visible.

Слика 3: Позади view of the Elitech BT-3 unit, illustrating the foldable kickstand for tabletop use and the attached outdoor temperature probe with its long cable.

Слика 4: Цлосе-уп view of the open battery compartment on the back of the Elitech BT-3 unit, showing the slot for a AAA battery (not included).

Сетуп

Инсталација батерије

1. Пронађите поклопац одељка за батерије на задњој страни уређаја (погледајте слику 2).
2. Slide the cover off to open the compartment (refer to Figure 4).
3. Insert one AAA battery, ensuring the correct polarity (+/-) is observed. Note: Battery is not included.
4. Вратите поклопац одељка за батерије тако што ћете га повући назад на место.

Постављање сонде

The outdoor temperature probe is connected to the main unit via a long cable. For accurate outdoor temperature readings, place the probe outside in a location that is protected from direct sunlight, rain, and other extreme weather conditions. Ensure the cable is routed safely and does not interfere with windows or doors.

Опције монтаже

The BT-3 offers flexible placement options:

• Плоча стола: Extend the foldable kickstand on the back of the unit (refer to Figure 3) to place it securely on any flat surface.
• Може се монтирати на зид: Utilize the keyhole slot on the back of the unit (refer to Figure 2) to hang it on a screw or nail on a wall.
• Magnet-Mountable: The unit features built-in magnets, allowing it to be conveniently attached to metallic surfaces such as refrigerators or metal cabinets.

Упутство за употребу

Укључивање/искључивање

The unit powers on automatically once the battery is installed. There is no dedicated power button. To turn off, remove the battery.

Temperature Unit Selection (℃/℉)

On the back of the unit, locate the small switch labeled "℃/℉" (refer to Figure 2). Slide this switch to toggle between Celsius and Fahrenheit temperature displays.

Подешавање времена

1. Притисните тастер МОДЕ button (on the back) to cycle through display modes until the current time is shown.
2. Притисните и држите МОДЕ button until the hour digit begins to flash.
3. Користите АДЈ button (on the back) to adjust the hour.
4. Притисните МОДЕ again to move to the minute digit, then use АДЈ за прилагођавање минута.
5. Наставите да притискате МОДЕ to set the 12-hour (AM/PM) or 24-hour format.
6. Притисните МОДЕ one last time to confirm settings and exit time setting mode.

Подешавање аларма

1. Притисните тастер МОДЕ button until the alarm time is displayed (often indicated by an alarm clock icon).
2. Притисните и држите МОДЕ button until the alarm hour digit flashes.
3. Користите АДЈ dugme za podešavanje sata alarma.
4. Притисните МОДЕ again to move to the alarm minute digit, then use АДЈ за прилагођавање минута.
5. Притисните МОДЕ one last time to confirm and exit alarm setting mode.
6. Да бисте активирали или деактивирали аларм, притисните дугме АДЈ button when the alarm time is displayed. An alarm icon will appear or disappear on the screen to indicate its status.

MAX/MIN Temperature and Humidity Records

Притисните тастер МАКС/МИН button (on the front of the unit) to view the maximum and minimum recorded indoor/outdoor temperatures and indoor humidity values.

• Притисните тастер МАКС/МИН button repeatedly to cycle through the current readings, maximum readings, and minimum readings.
• To clear the MAX/MIN records, press and hold the ЦЛЕАР button (on the back of the unit) while the MAX/MIN readings are displayed.

Индикатор ваздушне удобности

The display includes an indicator that categorizes the indoor air comfort level based on humidity:

• СУВО: Indicates that the indoor humidity level is low.
• УДОБНОСТ: Indicates that the indoor humidity level is within an optimal and comfortable range.
• МОКАР: Indicates that the indoor humidity level is high.

Одржавање

• Чишћење: Clean the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
• Замена батерије: Replace the AAA battery when the low battery indicator appears on the display to ensure continuous and accurate operation.
• Брига о сонди: Keep the outdoor probe clean and free from dirt, dust, and debris.
• Услови животне средине: Avoid exposing the unit to extreme temperatures, direct sunlight, or excessively high humidity for prolonged periods, as this can affect accuracy and lifespan.

Решавање проблема

Нетачна читања

• Постављање сонде: Ensure the outdoor probe is correctly positioned and not exposed to direct sunlight, heat sources, or moisture, which can skew readings.
• Време стабилизације: Allow the unit sufficient time (up to 30 minutes) to stabilize and provide accurate readings after initial setup or if it has been moved to a new environment.
• Ниво батерије: Check the battery level and replace it with a fresh AAA battery if the indicator shows low power.

Екран не ради

• Провера батерије: Verify that the battery is installed correctly with the proper polarity.
• Замена батерије: Замените батерију новом ААА батеријом.
• Фацтори Ресет: If the display remains unresponsive, perform a factory reset by pressing the РЕСЕТ button on the back of the unit. This may require a small pointed object like a paperclip.

Спецификације

Гаранција и подршка

Elitech is committed to providing excellent customer service. The product comes with 24/7 US Technician Support available via email and phone.

For warranty claims, technical assistance, or any product-related inquiries, please contact Elitech customer service directly. Refer to the Elitech official webсајт или паковање производа за најновије контакт информације.

Elitech Company Overview

Овај видео пружа општи прегледview of Elitech Technology Inc., its vision, and its range of HVAC/R tools and manufacturing capabilities. It is not specific to the BT-3 product operation but offers insight into the brand's commitment to innovation.