AUTOOL BT360 12V Battery Load Tester Instruction Manual

1. Увод

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. Безбедносне информације

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

• Wear appropriate eye protection and protective clothing when working near batteries.
• Уверите се да је возило у добро проветреном простору.
• Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
• Do not touch hot engine parts or moving components.
• Keep the tester and cables away from water, oil, and grease.
• Уверите се да је батерија цлampсу безбедно повезани са исправним терминалима (црвени на позитиван, црни на негативан).
• Ако киселина из батерије дође у контакт са кожом или очима, одмах испрати са доста воде и потражити медицинску помоћ.

3. Производ је готовview

3.1 Компоненте

The AUTOOL BT360 package typically includes:

• AUTOOL BT360 Main Unit
• Integrated Testing Cables with Alligator Clamps (црвена за позитивно, црна за негативно)
• Кориснички приручник (овај документ)

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

Слика 3.2: Предња страна view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

• ЕСЦ: Escape/Back button.
• ОРЛ: Enter/Confirm button.
• Стрелице горе/доле: Navigation buttons for menu selection.

3.3 Кључне карактеристике

• Performs Battery Test, Cranking Test, and Charging Test.
• Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
• Wide CCA testing range: 100-2400 CCA.
• Multi-language support for user interface.

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. Спецификације

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

4.1 Supported Starting Power Supply Standards

Image 4.2: Table showing various starting power supply standards supported by the BT360.

5. Подешавање

5.1 Распакивање

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

5.2 Повезивање тестера

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

1. Уверите се да је паљење возила искључено и да је сва додатна опрема искључена.
2. Повежите црвена позитиван (+) клamp to the positive (+) terminal of the 12V battery.
3. Повежите црна негативан (-) clamp to the negative (-) terminal of the 12V battery.
4. Once connected, the tester will power on automatically.

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. Упутство за употребу

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 Тест батерије

This function evaluates the overall health of the battery.

1. Из главног менија изаберите Тест батерије and press ENT.
2. Изаберите Локација батерије: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
3. Изаберите Тип батерије: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
4. Изаберите Тест Стандард: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
5. Сет Оцена батерије: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 Тест покретања

Овај тест анализира систем за покретање возила, укључујући и стартер.

1. Из главног менија изаберите Цранкинг Тест and press ENT.
2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltagе током покретања.
3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

6.3 Тест пуњења

Овај тест процењује систем пуњења возила, укључујући алтернатор и регулатор.

1. Из главног менија изаберите Тест пуњења and press ENT.
2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
3. The tester will measure the charging voltage under load and no-load conditions.
4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. Одржавање

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

• Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Држите батерију чистомampје чист и без корозије.
• Store the tester in a dry, cool place, away from direct sunlight and extreme temperatures.
• Избегавајте испуштање уређаја или излагање јаким ударима.

КСНУМКС. Решавање проблема

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

9. Гаранција и подршка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL webсајт. Сачувајте рачун као доказ о куповини за потребе гаранције.

Произвођач: АУТООЛ

Датум прве доступности: 27. октобра 2017. године