Lutron Diva Reverse-Phase (ELV) Dimmer Switch DVRP-253P-WH Instruction Manual

1. Увод

This manual provides instructions for the installation and operation of the Lutron Diva Reverse-Phase (ELV) Dimmer Switch, model DVRP-253P-WH. This dimmer is designed for use with 250W LED/CFL and 500W Incandescent/Halogen/ELV reverse phase applications. It features a paddle-style switch for on/off control and a slide control for adjusting light levels. A neutral wire connection is required for proper operation.

2. Важне информације о безбедности

• УПОЗОРЕЊЕ: Risk of Electric Shock. May result in serious injury or death. Turn off power at circuit breaker or fuse before installing.
• Инсталирајте у складу са свим националним и локалним електричним прописима.
• This device must be installed by a qualified electrician or trained personnel.
• Do not use with standard (forward phase) dimmers. This is a reverse-phase dimmer.
• За инсталацију је потребна неутрална жица.
• Само за унутрашњу употребу.
• Опсег радне температуре: 32°Ф до 104°Ф (0°Ц до 40°Ц).

3. Шта је у кутији

Пакет укључује следеће компоненте:

• Lutron Diva Reverse-Phase (ELV) Dimmer Switch (DVRP-253P-WH)
• Упутство за инсталацију

Image: The Lutron Diva Reverse-Phase Dimmer Switch (DVRP-253P-WH) shown installed in a kitchen setting, demonstrating its aesthetic integration.

4. Подешавање и инсталација

Before beginning installation, ensure power is turned off at the circuit breaker. This dimmer requires a neutral wire connection. If you are unsure about wiring, consult a qualified electrician.

4.1 Wiring Diagram Overview

The Diva Reverse-Phase Dimmer is designed for single-pole or 3-way applications. Refer to the detailed wiring instructions provided with your dimmer switch. The dimmer connects to the line (hot), load (to light fixture), neutral, and ground wires.

Слика: Детаљна view of the Lutron Diva Reverse-Phase Dimmer, highlighting its components: the paddle switch, slide control, and indicating its suitability for 3-way control of low voltage lights and fit into standard decorator-style openings.

4.2 Инсталација корак по корак

1. Искључите напајање: Locate your circuit breaker panel and turn off the power to the switch you are replacing.
2. Уклоните постојећи прекидач: Carefully remove the wallplate and unscrew the existing switch from the wall box. Disconnect the wires.
3. Идентификујте жице: Identify the line (hot), load, neutral, and ground wires. The neutral wire is typically white.
4. Ожичите димер: Connect the wires from the wall box to the corresponding wires on the Lutron Diva dimmer. Ensure all connections are secure.
   • Black wire (dimmer) to Line (hot) wire (wall box)
   • Red wire (dimmer) to Load wire (to light fixture)
   • White wire (dimmer) to Neutral wire (wall box)
   • Green wire (dimmer) to Ground wire (wall box)
5. Монтирајте димер: Carefully push the wired dimmer into the wall box and secure it with screws.
6. Инсталирајте зидну плочу: Attach the coordinating Claro wallplate (sold separately) over the dimmer.
7. Врати снагу: Поново укључите напајање на прекидачу.

For 3-way installations, refer to the specific wiring diagrams included in the product packaging. This dimmer is specifically designed for reverse-phase (ELV) loads. Using it with forward-phase loads may result in improper operation or damage.

Image: An illustration comparing Forward Phase Control, optimal for LEDs, Incandescent/Halogen, and MLV transformers, with Reverse Phase Control, which is optimal for LEDs and ELV transformers. This highlights the specific application of the Diva Reverse-Phase Dimmer.

5. Упутство за употребу

The Lutron Diva Reverse-Phase Dimmer offers intuitive control over your lighting.

• Укључивање/искључивање светла: Press the large paddle switch to turn the lights on or off. When turned on, the lights will return to the previously set dimming level.
• Подешавање осветљености: Use the small slide control located next to the paddle switch to adjust the light level. Slide up to increase brightness and down to decrease brightness.
• Locator Light: A soft locator light glows in the off position, making the dimmer easy to find in the dark.

Image: The Lutron Diva Dimmer Switch integrated into a modern living room, demonstrating how it can enhance the ambiance by controlling lighting levels.

6. Одржавање

The Lutron Diva Dimmer Switch requires minimal maintenance.

• Чишћење: Clean the dimmer and wallplate with a soft, damp тканина. Немојте користити абразивна средства за чишћење или раствараче.
• Нема делова које може да сервисира корисник: Унутар димера нема делова које корисник може сам да поправи. Не покушавајте да отворите или поправите уређај.

КСНУМКС. Решавање проблема

8. Спецификације

• Модел: DVRP-253P-WH
• Бренд: Лутрон
• Тип: Reverse-Phase (ELV) Dimmer Switch
• Компатибилност учитавања: 250W LED/CFL, 500W Incandescent/Halogen/ELV
• Волtage: 120В~ 60Хз
• Тип кола: Single Pole / 3-Way
• Неутрална жица: Обавезно
• Радна температура: 32°Ф до 104°Ф (0°Ц до 40°Ц)
• Димензије (Д к Ш к В): 4.8 к 3.12 к 4.8 инча
• Материјал: Brass, Copper (Contact Material)
• Сертификати: UL Listed, IP54

9. Подршка

For technical assistance, wiring questions, or product support, please contact Lutron's 24/7 customer support.

Lutron 24/7 Support: 844-588-7661