1. Производ је готовview
The Uponor Smatrix Base T-145 is a wired digital room thermostat designed for precise temperature control in heating and cooling systems, particularly underfloor heating. It directly transmits measured values to the Smatrix Base X-145 control module, ensuring efficient and responsive climate management. This thermostat features a clear digital display for easy temperature adjustment and monitoring.

Слика 1.1: Предња страна view of the Uponor Smatrix Base T-145 Wired Room Thermostat, showing its square white casing and central rotary dial for temperature adjustment. The 'Uponor' logo is visible at the bottom left.
2. Кључне карактеристике
- Digital Temperature Setting: Allows precise adjustment of the desired room temperature.
- Приказ верзије софтвера: Shows the software version upon startup.
- Екран са позадинским осветљењем: The display illuminates for 10 seconds after activation for improved visibility.
- Индикатор грејања/хлађења: Clearly displays the current operating mode.
- Setback Function: Enables energy-saving temperature reduction during unoccupied periods.
- Setback Temperature Display: Shows the active setback temperature.
- Избор јединице температуре: Пребацивање између Целзијуса и Фаренхајта.
- Приказ статуса батерије: Indicates the status of any internal backup battery or connected sensor batteries.
- Flexible Sensor Options: Supports room temperature (RT), floor sensor with max/min limits (FT), remote sensor (FS), and outdoor sensor (RO) inputs.
- Individual Room Cooling: Capable of managing cooling functions on a room-by-room basis.
3. Техничке спецификације
| Бранд | Упонор |
| Број модела | 1086974 |
| Боја | Бела (РАЛ 9016) |
| Димензије (В к Ш к Д) | 80 к 80 к 26.5 мм |
| Тежина артикла | 120 грама |
| Повер Суппли | 4-wire bus (Wired) |
| Волtage | 24 Волтс |
| Технологија повезивања | Виред |
| Заштитна класа | ИП 30 |
| Усклађеност | CE |
| Тип контролера | Ручна контрола |
| Тип контроле температуре | Дигитал |
| Специфичне употребе | Подно грејање |
| Укључене компоненте | Room thermostat and mounting hardware |
4. Безбедносне информације
Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.
- електрична безбедност: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure power is disconnected at the main circuit breaker before any wiring work.
- Услови животне средине: Do not expose the thermostat to direct water spray, excessive humidity, or extreme temperatures outside its operating range. The device has an IP30 protection rating, meaning it is protected against solid objects over 2.5mm but not against water.
- Наменска употреба: This thermostat is designed for controlling heating and cooling systems. Do not use it for purposes other than its intended function.
- Чишћење: За чишћење користите меку, суву крпу. Немојте користити абразивна средства за чишћење или раствараче.
5. Инсталација и подешавање
The Uponor Smatrix Base T-145 thermostat is a wired device requiring connection to an Uponor Smatrix Base X-145 control module via a 4-wire bus system. Professional installation is recommended.
5.1 Монтажа
- Искључивање струје: Ensure the main power supply to the heating/cooling system is turned off at the circuit breaker before beginning installation.
- Избор локације: Choose an indoor location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., lamps, appliances) that could affect temperature readings. Mount at a standard thermostat height (approximately 1.5 meters from the floor).
- Ожичење: Connect the 4-wire bus cable from the Smatrix Base X-145 control module to the designated terminals on the T-145 thermostat. Refer to the wiring diagram provided with the Smatrix Base X-145 control module for specific terminal assignments.
- Сигурна монтажа: Use the provided mounting hardware to securely attach the thermostat to the wall.
5.2 Почетно подешавање
- Укључено: Restore power to the system at the circuit breaker. The thermostat display should illuminate.
- Software Version Check: Upon initial power-up, the software version will briefly display.
- Јединица температуре: If necessary, adjust the temperature unit between Celsius and Fahrenheit according to the operating instructions in Section 6.
- Конфигурација сензора: If using optional floor, remote, or outdoor sensors, ensure they are correctly connected and configured within the Smatrix Base X-145 control module. The thermostat can display readings from these sensors.
6. Операција
The Uponor Smatrix Base T-145 thermostat provides straightforward control over your room's temperature.
6.1 Подешавање температуре
- Rotate the central dial clockwise to increase the desired temperature.
- Rotate the central dial counter-clockwise to decrease the desired temperature.
- The digital display will show the set temperature. The backlight will activate for 10 seconds after adjustment.
6.2 Приказ информација
- Тренутна температура: The main display shows the current room temperature.
- Подешена температура: Briefly displayed when adjusting the dial.
- Режим рада: An icon or text indicates if the system is currently heating or cooling.
- Setback Indicator: If the setback function is active, an indicator will show, along with the setback temperature.
- Статус батерије: Displays the status of any internal backup battery or connected sensor batteries.
6.3 Changing Temperature Units (Celsius/Fahrenheit)
Specific instructions for changing temperature units are typically found in the main Smatrix Base X-145 control module manual or accessed via a combination of button presses on the thermostat. Consult the comprehensive system manual for detailed steps.
7. Одржавање
The Uponor Smatrix Base T-145 thermostat requires minimal maintenance to ensure optimal performance.
- Чишћење: Periodically wipe the thermostat's exterior with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or excessive moisture.
- Провера сензора: If using external sensors (floor, remote, outdoor), ensure they are free from obstructions and debris that could affect their readings.
- Провера система: Regularly check the overall heating/cooling system for proper operation as per the Smatrix Base X-145 control module manual.
КСНУМКС. Решавање проблема
If you encounter issues with your Uponor Smatrix Base T-145 thermostat, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Екран је празан или не реагује. | No power to the thermostat or control module. | Check the main power supply and circuit breaker. Ensure the 4-wire bus connection is secure. |
| Нетачно очитавање температуре. | На локацију термостата утичу промаја, директна сунчева светлост или извори топлоте. | Relocate the thermostat if possible, or shield it from interfering elements. Ensure no external sensors are faulty or obstructed. |
| Систем грејања/хлађења не реагује. | Communication issue with Smatrix Base X-145 control module or system fault. | Verify the 4-wire bus connection. Check the Smatrix Base X-145 control module for error indicators. Consult the Smatrix Base X-145 manual for system-level troubleshooting. |
| Setback function not working as expected. | Incorrect configuration in the Smatrix Base X-145 control module. | Review the setback schedule and settings within the Smatrix Base X-145 control module. |
If the problem persists after attempting these solutions, contact Uponor customer support or a qualified HVAC technician.
9. Гаранција и подршка
For warranty information, technical support, or service inquiries regarding your Uponor Smatrix Base T-145 Wired Room Thermostat, please refer to the documentation included with your complete Uponor Smatrix system or visit the official Uponor webсајт. Сачувајте доказ о куповини за потребе гаранције.
Произвођач: Упонор
Број модела: 1086974
ASIN: B077CLZPJ8