Увод
The FONESTAR BTX-3011 is a compact and lightweight Bluetooth audio transmitter designed to enable wireless audio streaming from your television or other audio sources to Bluetooth headphones or speakers. This manual provides detailed instructions for the safe and efficient use of your device, ensuring optimal performance and longevity.
Безбедносне информације
- Не излажите уређај влази, киши или екстремним температурама.
- Избегавајте испуштање или излагање уређаја јаким ударима.
- Не покушавајте да растављате или модификујете уређај. То ће поништити гаранцију.
- Чувати ван домашаја деце.
- Use only the specified power source (5V DC via USB).
Садржај пакета
Молимо вас да проверите да ли су све ставке присутне:
- FONESTAR BTX-3011 Bluetooth Audio Transmitter
- Integrated 3.5mm stereo auxiliary cable (30 cm)
- Интегрисани УСБ кабл за напајање
- Кориснички приручник (овај документ)
Производ је завршенview
Image showing the compact design of the FONESTAR BTX-3011 Bluetooth Audio Transmitter, featuring its 3.5mm audio jack and USB power connector.
The BTX-3011 features a minimalist design with essential components for easy operation:
- 3.5 мм аудио прикључак: Connects to the audio output of your TV, stereo system, or other audio source.
- USB Power Connector: Connects to a USB port for power supply.
- Светло индикатора статуса: Provides visual feedback on the device's operational status (pairing, connected).
Сетуп
Follow these steps to set up your FONESTAR BTX-3011 transmitter:
- Повежите се са извором звука: Plug the integrated 3.5mm audio jack of the BTX-3011 into the audio output (e.g., headphone jack, AUX out) of your television, computer, or other audio device.
- Напајање уређаја: Plug the integrated USB power connector into a 5V DC USB port. This can be a USB port on your TV, a computer, a USB wall adapter (not included), or a power bank. The status indicator light will illuminate.
- Уђите у режим упаривања: The BTX-3011 will automatically enter pairing mode when powered on. The status indicator light will flash rapidly, indicating it is ready to connect to a Bluetooth receiving device.
- Pair with Bluetooth Headphones/Speaker:
- Поставите Bluetooth слушалице или звучник у режим упаривања. За конкретна упутства погледајте упутство за ваш аудио уређај.
- Place the headphones/speaker close to the BTX-3011.
- The BTX-3011 will automatically search for and connect to the nearest available Bluetooth audio receiver in pairing mode.
- Once connected, the status indicator light on the BTX-3011 will change to a steady illumination or flash slowly, depending on the connection status.
- Тест аудио: Play audio from your source device. You should now hear the audio through your connected Bluetooth headphones or speaker. Adjust volume on your receiving device as needed.
Оперативни
The FONESTAR BTX-3011 operates automatically once paired:
- Аутоматско поновно повезивање: After initial pairing, the transmitter will attempt to automatically reconnect to the last paired device when both are powered on and within range.
- Индикатор статуса: The LED indicator provides information about the device's state:
- Брзо трептање: Pairing mode, searching for a device.
- Стално светло: Successfully connected to a Bluetooth device.
- Опсег: The effective transmission range is approximately 10 meters (33 feet) in an open environment. Obstacles and interference may reduce this range.
Одржавање
To ensure the longevity and proper functioning of your BTX-3011:
- Чишћење: Обришите уређај меком, сувом крпом. Не користите течна средства за чишћење или абразивне материјале.
- Складиштење: Када се не користи, уређај чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
- Нега каблова: Avoid bending or twisting the integrated cables excessively to prevent damage.
Решавање проблема
If you encounter issues with your BTX-3011, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема аудио излаза. | Device not powered, not paired, or audio source issue. | Ensure USB power is connected. Verify BTX-3011 is paired (steady LED). Check audio source volume and output settings. |
| Cannot pair with headphones/speaker. | Headphones/speaker not in pairing mode, out of range, or already connected to another device. | Ensure your receiving device is in pairing mode. Move devices closer. Disconnect receiving device from other Bluetooth connections. Power cycle both devices. |
| Audio is intermittent or distorted. | Out of range, interference, or low battery on receiving device. | Move devices closer. Reduce obstacles between transmitter and receiver. Check battery level of headphones/speaker. Avoid strong Wi-Fi signals or other Bluetooth devices nearby. |
| ЛЕД индикатор се не пали. | Нема напајања. | Ensure the USB power cable is securely connected to a working 5V DC USB port. Try a different USB port or power adapter. |
Спецификације
| Феатуре | Спецификација |
|---|---|
| Модел | БТКС-3011 |
| Бранд | ФОНЕСТАР |
| Технологија повезивања | Блуетоотх, УСБ |
| вирелесс стандард | Bluetooth 3.0 EDR A2DP |
| Трансмиссион Дистанце | До 10 метара (33 стопе) |
| Инпут | 1 x 3.5mm Stereo Auxiliary Jack |
| Повер Суппли | 5V DC via USB port |
| Димензије (В к Ш к Д) | 20 x 10 x 39 mm (приближно) |
| Пуњива батерија | Not included (device is USB powered) |
| Ремоте Цонтрол | Није укључено |
Гаранција и подршка
FONESTAR products are designed for reliability and performance. For warranty information and technical support, please refer to the official FONESTAR website or contact your local dealer. Please retain your proof of purchase for any warranty claims.