TMH TMH-25LED-R
TMH 6-Inch Oval Arrow LED Red Tail Lights (2-Pack) Instruction Manual

Слика 1: Готовоview of TMH 6-Inch Oval Arrow LED Red Tail Lights.
1. Увод
Thank you for choosing TMH 6-Inch Oval Arrow LED Red Tail Lights. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lights. Please read these instructions thoroughly before installation and retain this manual for future reference. These lights are designed for use as tail lights and turn signals on various vehicles including trucks, trailers, buses, and dump trucks, operating on a 12V DC system.

Слика 1.1: TMH 6-Inch Oval Arrow LED Red Tail Lights. This image displays two red oval LED lights, each featuring an arrow pattern. Four mounting screws are visible in the foreground.
Each light features 25 super bright F3 Piranha LEDs arranged in an arrow pattern, providing clear visibility and signaling.

Слика 1.2: LED Count and Arrow Pattern. This image provides a close-up view of the light's lens, clearly showing the 25 individual F3 Piranha LEDs arranged to form a distinct arrow shape.

Слика 1.3: F3 Piranha LED. This image shows a detailed view of the F3 Piranha LED component used in the lights, known for its brightness and durability.
2. Безбедносне информације
- Увек искључите акумулатор возила пре него што извршите било какве електричне радове како бисте спречили струјни удар или кратки спој.
- Ensure all wiring connections are secure and properly insulated to prevent corrosion and electrical faults.
- Проверите да ли је оперативни волtage of your vehicle is 12V DC. Connecting to an incorrect voltage may damage the lights.
- Носите одговарајућу личну заштитну опрему, као што су заштитне наочаре и рукавице, током инсталације.
- Do not modify the lights or their components. Unauthorized modifications may void the warranty and create safety hazards.
- Ако нисте сигурни у вези са било којим делом процеса инсталације, консултујте квалификованог аутоелектричара.
3. Садржај пакета
Пакет укључује следеће ставке:
- 2 x TMH 6-Inch Oval Arrow LED Red Tail Lights
- 4 к завртњи за монтажу
4. Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | ТМХ |
| Број модела | TMH-25LED-R |
| Лигхт Типе | LED Tail Light / Turn Signal |
| ЛЕД количина | 25 Piranha LEDs per light |
| Боја | Red Light & Red Lens |
| Функције | Tail Light (Low Brightness), Brake/Turn Signal (High Brightness) |
| Оператинг Волtage | 12В ДЦ |
| Ватtage | 3.31 вати |
| Тип монтаже | Сурфаце Моунт |
| Димензије (Д к Ш к В) | 7.5 к 3.3 к 1 инча |
| Материјал | ABS Housing, Polycarbonate Lens |
| Карактеристике | Waterproof, Shockproof, Dustproof |
| УПЦ | 757347529700 |

Слика 4.1: Product Dimensions. This diagram illustrates the oval shape and measurements of the light, indicating a length of 7.5 inches, a width of 3.3 inches, and a depth of 1 inch.
5. Инсталација
5.1 Провера пре инсталације
- Ensure the mounting surface is clean, flat, and free from obstructions.
- Confirm that the vehicle's electrical system is 12V DC.
- Gather necessary tools: drill, screwdriver, wire strippers, crimpers, electrical tape or heat shrink tubing.
5.2 Упутства за монтажу
- Position the light on the desired surface. Ensure the arrow pattern is oriented correctly for the intended signal direction.
- Mark the locations for the four mounting screws.
- Drill pilot holes if necessary, ensuring they are appropriately sized for the provided screws.
- Secure the light to the surface using the provided mounting screws. Do not overtighten.
5.3 Дијаграм ожичења и везе
The TMH LED Tail Lights feature a 3-wire connection system for dual-functionality (low brightness for tail light, high brightness for brake/turn signal).
- Црна жица: земља (-)
- Црвена жица: Low Brightness (Tail Light / Running Light) (+)
- Бела жица: High Brightness (Brake Light / Turn Signal) (+)
- Повежите Црна жица from the light to the vehicle's chassis ground or negative (-) terminal.
- Повежите Црвена жица from the light to the vehicle's tail light or running light positive (+) circuit. This will activate the low brightness mode.
- Повежите Бела жица from the light to the vehicle's brake light or turn signal positive (+) circuit. This will activate the high brightness mode.
- Ensure all connections are secure and protected from moisture and abrasion using electrical tape or heat shrink tubing.

Слика 5.1: Wiring Diagram. This image illustrates the three-wire connection: black for ground, red for low brightness (tail light), and white for high brightness (brake/turn signal).

Слика 5.2: Two-Step Brightness Function. This image demonstrates the difference between the low brightness (Step 1) and high brightness (Step 2) modes of the LED light.
6. Операција
Once properly installed and wired, the TMH 6-Inch Oval Arrow LED Red Tail Lights will operate as follows:
- When the vehicle's running lights or tail lights are activated, the lights will illuminate at ниска осветљеност (via the Red wire connection).
- When the vehicle's brake pedal is pressed or the turn signal is activated, the lights will illuminate at висока осветљеност (via the White wire connection). If used as a turn signal, the high brightness will flash according to the vehicle's flasher relay.
Напомена: If you intend to use these lights solely as turn signals or emergency lights, a flasher relay or controller (not included) may be required for proper flashing functionality.
7. Одржавање
The TMH LED Tail Lights are designed for durability and minimal maintenance.
- Чишћење: Clean the lens periodically with a soft cloth and mild soap and water to ensure maximum light output. Avoid abrasive cleaners or solvents.
- инспекција: Regularly inspect the lights and wiring for any signs of damage, loose connections, or corrosion. Address any issues promptly to maintain optimal performance and safety.
- Отпорност на временске услове: These lights are waterproof, shockproof, and dustproof, designed to withstand various environmental conditions.

Слика 7.1: Waterproof and Weatherproof Design. This image shows the light being exposed to water, highlighting its resistance to environmental elements.
КСНУМКС. Решавање проблема
If you encounter issues with your TMH LED Tail Lights, refer to the following troubleshooting guide:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Светла не светле | No power supply, incorrect wiring, faulty ground connection, blown fuse. |
|
| Lights are dim or flicker | Poor electrical connection, insufficient voltage, corrosion in wiring. |
|
| Само један ниво осветљености ради | Incorrect wiring for Red or White wire, faulty connection. |
|
If troubleshooting steps do not resolve the issue, please contact TMH customer support.
9. Гаранција и подршка
9.1 Информације о гаранцији
TMH provides a 1-year Premium TMH warranty for these LED Tail Lights, covering free replacement for manufacturing defects. Please retain your proof of purchase for warranty claims.
9.2 Корисничка подршка
For technical assistance, warranty claims, or any questions regarding your TMH product, please visit the official TMH webсајт или контактирајте њихову службу за корисничку подршку.
TMH Brand Store: https://www.amazon.com/stores/TMH/page/47AA2177-AADC-4F12-A7C1-4D521FE33484