SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Увод

Хвала вам на куповиниasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Кључне карактеристике

One-stop gig solution for classic rock players with all necessary core effects.
Analog Plexi-style distortion for 80s/90s hard rock tones.
Analog BBD-style chorus for warm, dreamy soundscapes.
500ms analog voice delay and high-quality reverb for expansive, spacy tones.
Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Шта је у кутији

SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
КСЛР кабл
Адаптер за напајање (9В ДЦ)
Упутство за употребу

4. Упутства за подешавање

4.1 Прикључак за напајање

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Аудио везе

Улаз за гитару: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
Излаз у Amplifier/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
Излаз за слушалице: For silent practice, connect headphones to the 'PHONES' jack.

SONICAKE RockStage pedal with input and output jacks — Слика 1: Завршеноview of the SONICAKE RockStage pedal, showing input, output, and power connections.

SONICAKE RockStage pedal connected to guitar and ampлифиер — Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Упутство за употребу

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Effect Modules

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Delay, Reverb — Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.

Рефрен: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
Роцк Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
кашњење: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
Реверб: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Активирање/деактивирање ефеката

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted — Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stagе окружења.

SONICAKE RockStage pedal showing illuminated LED knobs — Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Преносивост

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag — Figure 6: The compact design allows for easy transport and setup.

6. Спецификације

Феатуре	Детаљ
Бранд	СОНИЦАКЕ
Назив модела	СТЕНЕTAGE (QCE-10)
Димензије	40L x 7l x 5.5H cm
Волtage	9 Волтс
Ampераге	20 Милиampере
Ефекти аудио излаза	Overdrive, Distortion, Chorus, Reverb, Delay
Тип контроле	Дугме, дугме
Извор напајања	Цордед Елецтриц
Хардверски интерфејс	Multiple Audio
Формат сигнала	Аналог
Тип конектора	КСНУМКС мм Аудио Јацк
Земља порекла	Кина

7. Одржавање

Чишћење: Use a soft, dry cloth to clean the pedal. Avoid using abrasive cleaners or solvents.
Складиштење: Чувајте педалу на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
Руковање: Избегавајте испуштање педале или њено излагање јаким ударцима.
Снага: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

КСНУМКС. Решавање проблема

Нема звука:
- Уверите се да су сви каблови безбедно повезани.
- Verify the power adapter is correctly plugged in and providing power.
- Check your guitar and amplifier volume settings.
- Тестирајте са различитим кабловима да бисте искључили неисправне везе.
Нежељена бука/брујање:
- Ensure you are using the correct power adapter.
- Покушајте да користите другу утичницу.
- Keep the pedal away from other electronic devices that may cause interference.
Effect Not Activating:
- Press the footswitch firmly. The LED should illuminate.
- Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Гаранција и подршка

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a 1-годишња гаранција на производ од дана куповине.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE webсајту.