Утилитек 0302325

Utilitech 0302325 Candelabra Light Control Instruction Manual

Модел: 0302325

1. Увод

The Utilitech 0302325 Candelabra Light Control is designed to automate your incandescent lighting. This device features a dusk-to-dawn sensor, which automatically turns candelabra-based incandescent bulbs on when it gets dark and off when it becomes light. It is suitable for both indoor and outdoor applications, providing convenience and energy efficiency.

2. Безбедносне информације

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање на кутији са осигурачима или прекидачу пре инсталације или сервисирања.
  • This device is designed for use with incandescent bulbs only, up to 60W. Do not exceed the maximum wattage.
  • Ensure the light control is installed in a location where it is protected from direct water spray if used outdoors, although it is water resistant.
  • Do not attempt to modify or repair the device. Refer all servicing to qualified personnel.
  • Чувати даље од деце.

3. Садржај пакета

Пре инсталације проверите да ли су све компоненте присутне:

  • Utilitech 0302325 Candelabra Light Control (Quantity may vary based on purchase pack)
  • Упутство за употребу (овај документ)

4. Подешавање и инсталација

The Utilitech 0302325 Candelabra Light Control features a simple screw-in installation process.

  1. Искључите напајање: Пре почетка инсталације, уверите се да је напајање светиљке искључено на прекидачу или кутији са осигурачима.
  2. Уклоните постојећу сијалицу: Carefully remove the existing candelabra-based incandescent bulb from the fixture.
  3. Screw in Light Control: Screw the Utilitech 0302325 Candelabra Light Control into the empty candelabra socket. Ensure it is securely tightened.
  4. Инсталирајте сијалицу: Screw your candelabra-based incandescent bulb (up to 60W) into the socket on the Utilitech light control.
  5. Позиционирање: For optimal performance, ensure the sensor on the light control is not obstructed and can detect ambient light levels accurately. Avoid positioning it where artificial light sources (e.g., other lamps, streetlights) might directly shine on the sensor, as this could interfere with its operation.
  6. Врати снагу: Once the light control and bulb are securely installed, restore power to the fixture at the circuit breaker or fuse box.
Utilitech 0302325 Candelabra Light Control, bronze color, shown with a candelabra bulb screwed into it, ready for installation into a light fixture.

Figure 1: Utilitech 0302325 Candelabra Light Control. This image shows the bronze-colored light control unit, designed to screw into a candelabra socket, with a bulb then screwing into the control unit itself.

5. Операција

The Utilitech 0302325 Candelabra Light Control operates automatically based on ambient light levels.

  • Функционалност од сумрака до зоре: The integrated sensor detects when natural light levels fall below a certain threshold (dusk) and automatically turns on the connected incandescent bulb.
  • Аутоматско искључивање: When natural light levels rise above the threshold (dawn), the sensor will automatically turn off the connected bulb.
  • No manual adjustment or programming is required for its basic operation.

6. Одржавање

The Utilitech 0302325 Candelabra Light Control requires minimal maintenance.

  • Чишћење: Periodically wipe the exterior of the light control with a soft, dry cloth to remove dust or debris. Do not use abrasive cleaners or solvents. Ensure the sensor area remains clean for accurate light detection.
  • Замена сијалице: When the incandescent bulb needs replacement, ensure power is turned off at the circuit breaker before unscrewing the old bulb and installing a new one.
  • There are no user-serviceable parts inside the light control unit.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Светло се не пали у сумрак.
  • Нема струје за уређај.
  • Сијалица је прегорела.
  • Сензор је блокиран или прима превише светлости.
  • Light control is faulty.
  • Проверите прекидач/осигурач.
  • Замените сијалицу.
  • Уверите се да је сензор чист и да није изложен вештачком светлу.
  • Replace the light control unit.
Light does not turn off at dawn.
  • Сензор је блокиран или не прима довољно светлости.
  • Light control is faulty.
  • Уверите се да је сензор чист и изложен природној дневној светлости.
  • Replace the light control unit.
Bulb shines at reduced brightness.
  • Incompatible bulb type (e.g., LED instead of incandescent).
  • Faulty light control unit.
  • Ensure an incandescent bulb is used. This device is designed for incandescent bulbs only.
  • Replace the light control unit.

8. Спецификације

ФеатуреДетаљ
Број модела0302325 (Part Number: 43497-23210)
БрандУтилитецх
ТипDusk-to-dawn Candelabra Light Control
Врста инсталацијеПричврстити завртњем
Компатибилност типова сијалицаIncandescent (Candelabra-based)
Макимум Ватtage60 Ваттс
Волtage120 Волтс
Унутрашња/спољна употребаУ затвореном, на отвореном
МатеријалПластика
Боја/завршна обрадаБронза
Сигурносни списакЕТЛ Листед
Тежина артикла1.76 унци (приближно 0.11 лбс)
Димензије (пакет)6.6 к 3.4 к 1 инча

9. Гаранција и подршка

Specific warranty information for the Utilitech 0302325 Candelabra Light Control is typically provided with the product packaging or can be obtained from the retailer at the time of purchase. Please retain your proof of purchase for warranty claims.

For technical support or further assistance, please contact Utilitech customer service or refer to the official Utilitech webсајт за контакт информације. Visit Utilitech.com

© 2024 Utilitech. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.