Project Source 11-Inch Flush Mount Light User Manual

Увод

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Project Source 11-Inch Flush Mount Light fixture. Please read this manual thoroughly before beginning installation and retain it for future reference. This product is designed for indoor use only.

Безбедносне информације

WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installing or servicing.

• Сви електрични прикључци морају бити у складу са локалним прописима, уредбама или Националним електричним кодексом (NEC).
• Консултујте квалификованог електричара ако нисте сигурни у процес инсталације.
• Не инсталирајте овај уређај у влажном илиamp локацијама.
• Ensure all wires are properly connected and secured to prevent short circuits.
• Немојте прекорачити максималну снагуtagнаведено за овај уређај.
• Пажљиво рукујте стакленим компонентама како бисте спречили ломљење.

Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

• Project Source 11-Inch Flush Mount Light Fixture (2 units)
• Mounting Hardware Kit (screws, wire nuts)
• Упутство за употребу (овај документ)

Image: The retail packaging box for the Project Source 11-Inch Flush Mount Light. The box is white with green accents, featuring an image of the light fixture and "PROJECT SOURCE" branding.

Подешавање и инсталација

Потребни алати (нису укључени):

• Пхиллипс шрафцигер
• Скидачи жице
• Електрична трака (опционо)
• Заштитне наочаре

Кораци инсталације:

1. Искључите напајање: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely before proceeding.
2. Уклоните стари уређај (ако је потребно): Carefully remove any existing light fixture, noting the wiring connections.
3. Припремите ожичење: If necessary, strip approximately 1/2 inch of insulation from the ends of the house supply wires.
4. Повежите жице:
   • Повежите црна жица од уређаја до црна (hot) wire from the ceiling box using a wire nut.
   • Повежите бела жица од уређаја до бела (neutral) wire from the ceiling box using a wire nut.
   • Повежите зелени или голи бакар уземљивачка жица од уређаја до зелени или голи бакар ground wire from the ceiling box using a wire nut.

   Ensure all wire nuts are securely tightened. Wrap electrical tape around wire nuts for added security if desired.
5. Монтажа: Carefully tuck all wires into the junction box. Align the fixture's mounting holes with the screws on the junction box or mounting bracket. Secure the fixture to the ceiling using the provided screws.
6. Install Glass Diffuser: Gently place the glass diffuser into the fixture and secure it according to the fixture's design (e.g., twist-lock, spring clips, or decorative nuts).
7. Врати снагу: Turn the power back on at the circuit breaker or fuse box. Test the light fixture to ensure it functions correctly.

Image: A pair of Project Source 11-Inch Flush Mount Light fixtures. Each fixture features a brushed nickel base and a domed, frosted white glass diffuser, designed to provide soft, diffused light.

Упутство за употребу

The Project Source 11-Inch Flush Mount Light is designed for simple operation. Once properly installed and wired, the light fixture is controlled by a standard wall switch connected to the circuit. Flip the wall switch to the "ON" position to illuminate the fixture, and to the "OFF" position to turn it off.

Note: This fixture uses integrated LED technology and does not require bulb replacement.

Одржавање

To ensure the longevity and appearance of your light fixture, follow these simple maintenance guidelines:

• Чишћење: Пре чишћења, уверите се да је напајање уређаја искључено преко прекидача. Користите меку, суву или благо длаку.amp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Нега стакла: The frosted glass diffuser can be carefully removed for cleaning if necessary. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
• Без замене сијалице: This fixture features integrated LED components. There are no bulbs to replace. If the light stops working, refer to the Troubleshooting section.

Решавање проблема

If your light fixture is not functioning as expected, consult the following common issues and solutions:

Ако проблем и даље постоји након што сте испробали ова решења, обратите се квалификованом електричару или корисничкој подршци.

Спецификације

Гаранција и подршка

This product is a refurbished item. Please refer to the seller's specific return and warranty policy at the point of purchase for details regarding coverage and support for refurbished products. General support for Project Source products may be available through their official channels.

For technical assistance or further inquiries, please contact the retailer or manufacturer directly.