ClearOne Converge Pro 2 128SR Sound Reinforcement DSP Mixer User Manual

1. Увод

The ClearOne Converge Pro 2 128SR is a powerful sound reinforcement DSP mixer designed for professional audio applications. It features 12 mic/line inputs, 8 mic/line outputs, and built-in USB audio connectivity, providing robust audio processing and routing capabilities for various environments.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Converge Pro 2 128SR unit. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

2. Безбедносне информације

• Извор напајања: Use only the power supply specified for this device. Ensure the power outlet is properly grounded.
• вентилација: Do not block any ventilation openings. Install the unit in a location with adequate airflow to prevent overheating.
• Влага: Do not expose this device to rain, moisture, dripping, or splashing. Do not place objects filled with liquids on the apparatus.
• Сервисирање: Сва сервисирања препустите квалификованом сервисном особљу. Не покушавајте сами да сервисирате овај производ.
• Чишћење: Unplug the unit from the power source before cleaning. Use a dry cloth for cleaning.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• ClearOne Converge Pro 2 128SR DSP Mixer Unit
• Повер Цабле
• УСБ кабл
• Водич за брзи почетак (ово упутство)
• Rack Mount Ears (pre-attached or included)

4. Подешавање

4.1 Распакивање и постављање

1. Carefully remove the Converge Pro 2 128SR unit from its packaging.
2. Place the unit on a stable, flat surface or install it into a standard 19-inch equipment rack using the provided rack mount ears. Ensure adequate ventilation around the unit.

4.2 Предња плоча прекоview

The front panel of the Converge Pro 2 128SR provides essential indicators and a USB port for direct connection to a computer.

Слика 4.1: Front panel of the ClearOne Converge Pro 2 128SR. Note the USB port on the left, and the Status, Locate, and Power LED indicators to the right of the USB port. The ClearOne logo is prominently displayed on the right side.

• УСБ порт: Used for direct connection to a computer for audio streaming and configuration.
• Статус ЛЕД: Indicates the operational status of the unit.
• Locate LED: Used to identify the unit in a rack when multiple units are present.
• ЛЕД за напајање: Светли када је јединица укључена.

4.3 Повезивање напајања

1. Connect the provided power cable to the AC inlet on the rear panel of the unit.
2. Укључите други крај кабла за напајање у одговарајућу уземљену електричну утичницу.
3. The Power LED on the front panel should illuminate, indicating the unit is receiving power.

4.4 Connecting Audio Inputs and Outputs

The Converge Pro 2 128SR features 12 mic/line inputs and 8 mic/line outputs on its rear panel. Use appropriate balanced audio cables (XLR or Phoenix connectors, depending on the specific model and accessories) for connections.

1. Connect your microphones or line-level audio sources to the designated input ports.
2. Connect the audio outputs to your amplifiers, loudspeakers, or other audio distribution systems.

4.5 Connecting USB Audio

The built-in USB audio allows for direct integration with computers for soft codec applications or recording.

1. Connect one end of the supplied USB cable to the USB port on the front panel of the Converge Pro 2 128SR.
2. Повежите други крај УСБ кабла са доступним УСБ портом на рачунару.
3. The unit should be recognized by your operating system as an audio device.

5. Упутство за употребу

5.1 Основни рад

The Converge Pro 2 128SR is primarily configured and controlled via ClearOne's CONVERGE Console software. This software allows for comprehensive control over all DSP functions, routing, and system settings.

• Укључивање/искључивање: The unit powers on automatically when connected to power. To power off, disconnect the power cable.
• Индикатори статуса: Monitor the front panel LEDs for operational status. A solid green Status LED typically indicates normal operation.

5.2 Software Control (CONVERGE Console)

For detailed configuration and advanced features, download and install the latest version of the CONVERGE Console software from the ClearOne webсајт (ввв.цлеароне.цом).

1. Launch the CONVERGE Console software on your computer.
2. The software will automatically detect connected Converge Pro 2 units on the network or via USB.
3. Use the software interface to configure audio inputs, outputs, DSP parameters (e.g., AEC, noise cancellation, gain), routing, and presets.

5.3 Audio Routing and Processing

Within the CONVERGE Console software, you can:

• Create custom audio signal flows.
• Apply various DSP algorithms to optimize audio quality.
• Manage microphone gain levels and phantom power.
• Route USB audio to and from the DSP mixer.

6. Одржавање

Regular maintenance ensures the longevity and optimal performance of your Converge Pro 2 128SR.

• Чишћење: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or aerosols.
• вентилација: Периодично проверавајте да ли су вентилациони отвори чисти од прашине и остатака.
• Ажурирања фирмвера: Check the ClearOne website regularly for firmware updates. Keeping the firmware updated ensures access to the latest features and performance improvements.

КСНУМКС. Решавање проблема

If you encounter issues with your Converge Pro 2 128SR, refer to the table below for common problems and solutions.

8. Спецификације

9. Гаранција и подршка

ClearOne products are designed for reliability and performance. For detailed warranty information, please refer to the warranty statement available on the official ClearOne website or contact your authorized ClearOne dealer.

For technical support, product registration, or to download the latest software and firmware, please visit the ClearOne support portal:

www.clearone.com/support

When contacting support, please have your product model number (910-3200-101) and serial number ready.