1. Увод
This manual provides detailed instructions for the MEAN WELL LRS-35-24 35W 24V 1.5A Enclosed AC/DC Power Supply. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product.
Слика 1.1: Завршеноview of LRS-35 series features and typical applications.
1.1 Кључне карактеристике
- Universal AC input / Full range (85 ~ 264 VAC).
- Withstands 300 VAC surge input for 5 seconds.
- Потрошња енергије без оптерећења <0.2W.
- Compact size and 1U low profile.
- High operating temperature up to 70 °C.
- Заштите: Кратак спој, Преоптерећење, Преко Волtage.
- Хлађење слободном конвекцијом ваздуха.
- Compliance with IEC/EN 60335-1 (PD3) and IEC/EN61558-1, -2-16 for household appliances.
- Operating altitude up to 5000 meters.
- Withstands 5G vibration test.
- High efficiency, long life, and high reliability.
- ЛЕД индикатор за укључено напајање.
- Тест сагоревања при 100% пуном оптерећењу.
2. Безбедносна упутства
УПОЗОРЕЊЕ: Improper installation or use can lead to electric shock, fire, or other hazards. Always follow these safety guidelines.
- Квалификовано особље: Инсталацију и одржавање треба да обавља само квалификовано особље.
- Искључивање струје: Always disconnect the AC power before any installation, wiring, or maintenance work.
- Правилно уземљење: Уверите се да је напајање правилно уземљено како бисте спречили струјни удар.
- вентилација: Do not obstruct the ventilation openings. Ensure adequate airflow for cooling.
- Окружење: Do not operate in environments with excessive moisture, dust, or extreme temperatures outside the specified range.
- Заштита од преоптерећења: Do not exceed the specified output current or power ratings to prevent damage and fire hazards.
- изолација: Ensure all connections are properly insulated to prevent short circuits.
- Волtagе Подешавање: Излазни волtage adjustment potentiometer should only be adjusted by qualified personnel using appropriate tools.
3. Производ је готовview
The LRS-35-24 is a 35W single-output enclosed type power supply with a 30mm low profile design. It features a metallic mesh case for enhanced heat dissipation.
Слика 3.1: Предња страна view of the LRS-35-24 power supply.
Слика 3.2: Врх view of the LRS-35-24 power supply showing input and output terminals.
3.1 Распоред пинова терминала
Refer to the diagram below for the correct terminal connections.
Figure 3.3: Mechanical specification and terminal pin assignment. Pin 1: AC/L, Pin 2: AC/N, Pin 3: FG (Frame Ground), Pin 4: DC Output -V, Pin 5: DC Output +V.
| Пин Но. | Задатак |
|---|---|
| 1 | AC/L (Live AC Input) |
| 2 | AC/N (Neutral AC Input) |
| 3 | ФГ (Фраме Гроунд) |
| 4 | DC OUTPUT -V (Negative DC Output) |
| 5 | DC OUTPUT +V (Positive DC Output) |
4. Подешавање и инсталација
Follow these steps for proper installation of the power supply.
- Монтажа: Mount the power supply in a well-ventilated area. Ensure sufficient clearance around the unit for proper air convection. The unit can be mounted horizontally or vertically, but consider the airflow direction for optimal cooling. Refer to the mechanical specifications for mounting hole dimensions (Figure 3.3).
- Wiring Input (AC):
- Connect the AC Live wire to the 'L' terminal (Pin 1).
- Connect the AC Neutral wire to the 'N' terminal (Pin 2).
- Connect the Frame Ground wire to the 'FG' terminal (Pin 3). This connection is critical for safety.
- Ensure all input wires are securely fastened and have appropriate gauge for the current draw.
- Wiring Output (DC):
- Connect the positive (+) load wire to the '+V' terminal (Pin 5).
- Connect the negative (-) load wire to the '-V' terminal (Pin 4).
- Verify correct polarity before connecting to the load device.
- Ensure all output wires are securely fastened and have appropriate gauge for the current draw.
- Волtagе Подешавање: Излазни волtage can be finely adjusted using the 'V ADJ' potentiometer located near the output terminals. Use a non-conductive screwdriver for adjustment. Немојте прекорачити наведену волtagе ранге.
- Коначна провера: Before applying power, double-check all wiring connections for correctness, security, and proper insulation.
5. Упутство за употребу
Once the power supply is correctly installed and wired, it is ready for operation.
- Укључено: Apply AC power to the input terminals. The green LED indicator on the unit will illuminate, indicating that the power supply is active and providing output voltage.
- Оутпут Волtage: The power supply will provide a stable 24V DC output. If adjustment is needed, refer to the "Voltage Adjustment" step in the Setup section.
- Учитавање везе: Connect your DC load device to the output terminals, ensuring correct polarity.
- Надгледање: Observe the LED indicator. If it is off, check the input power and connections.
5.1 Derating Curve and Static Characteristics
The performance of the power supply can be affected by ambient temperature and input voltage. Refer to the following curves for optimal operation.
Figure 5.1: Derating curve showing load percentage vs. ambient temperature, and static characteristics showing load percentagе у односу на улазну запреминуtage.
- Крива смањења снаге: Shows the maximum permissible load at different ambient temperatures. For temperatures above 50°C, the output power must be derated to prevent overheating.
- Статичке карактеристике: Illustrates how the output load capacity is maintained across the input voltagе ранге.
6. Одржавање
The LRS-35-24 power supply is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure optimal performance.
- Чишћење: Ensure the ventilation holes are free from dust and debris. Use a soft, dry brush or compressed air to clean the unit if necessary. Do not use liquid cleaners.
- Провере везе: Periodically inspect all input and output wiring connections to ensure they remain secure. Loose connections can cause intermittent operation or overheating.
- Услови животне средине: Проверите да ли радно окружење остаје у наведеним опсезима температуре и влажности.
- Визуелни преглед: Look for any signs of physical damage, discoloration, or unusual odors. If any issues are observed, disconnect power immediately and consult a qualified technician.
КСНУМКС. Решавање проблема
Овај одељак пружа решења за уобичајене проблеме на које можете наићи.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Но оутпут волtagе / ЛЕД искључено | Нема наизменичног напајања Лабаве везе ожичења Унутрашња грешка | Check AC power source and circuit breaker. Verify all input and output wiring connections are secure. If power is present and connections are good, the unit may be faulty. Contact support. |
| Оутпут волtagе варира или је нетачно | Стање преоптерећења Неисправно оптерећење Волtage adjustment potentiometer disturbed | Reduce the load to within specifications. Disconnect the load and test the power supply independently. Carefully adjust the 'V ADJ' potentiometer to the desired voltage. |
| Unit is excessively hot | Недовољна вентилација Стање преоптерећења Висока температура околине | Ensure adequate airflow around the unit. Clear any obstructions. Reduce the load. Check the derating curve (Figure 5.1). Relocate the unit to a cooler environment if possible. |
| Audible noise from unit | Нормалан рад (благо зујање) Overload or fault condition | A slight hum can be normal. If noise is loud or unusual, check for overload. Disconnect power and contact support if noise persists and is concerning. |
For issues not covered here, please contact MEAN WELL technical support.
8. Спецификације
Detailed technical specifications for the LRS-35-24 power supply.
Figure 8.1: Comprehensive technical specifications for the LRS-35 series, including input, output, protection, and environmental data.
| Параметар | Валуе |
|---|---|
| Модел | ЛРС-35-24 |
| ДЦ Волtage | 24В |
| Називна струја | 1.5А |
| Називна снага | 36В |
| Волtage Range (Input) | 85 ~ 264 ВАЦ |
| Фреквенцијски опсег | 47 ~ 63 Хз |
| Ефикасност | 88% |
| Радна температура | -30 ~ +70 °Ц |
| Димензије (Д к Ш к В) | 99 к 82 к 30 мм |
| Тежина | 0.23 кг |
| Заштита | Кратак спој, Преоптерећење, Преко Волtage |
| Безбедносни стандарди | UL60950-1, TUV EN60950-1, EN60335-1, EN61558-1/-2-16, CCC GB4943 approved |
9. Гаранција
This MEAN WELL LRS-35-24 power supply comes with a 2 година гаранције from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, unauthorized modifications, or external factors such as power surges or natural disasters.
For warranty claims, please retain your proof of purchase and contact your retailer or MEAN WELL customer support.
10. Подршка и контакт информације
For technical assistance, troubleshooting, or further information regarding the MEAN WELL LRS-35-24 power supply, please refer to the official MEAN WELL webсајту или контактирајте њихову корисничку подршку.
- Службено Webсајт: ввв.меанвелл.цом
- Упутства: Specific product manuals can often be found at www.meanwell.com/manual.html
- Контакт: Погледајте одељак „Контактирајте нас“ на званичној webсајт за детаље о регионалној подршци.