1. Производ је готовview
The AERAULIQA QX80HT is a centrifugal extractor fan with a 73.5mm diameter, designed for efficient ventilation in bathrooms, toilets, and small to medium-sized rooms. It effectively extracts stale air and can overcome resistance from long ducts. This unit is suitable for both wall and ceiling installation, including recessed plasterboard applications. It features a minimalist design front cover that is easily removable for cleaning without the need for tools. An aerodynamic grille minimizes air turbulence for enhanced acoustic comfort. A PP filter protects the fan and motor, and is also easily removable for maintenance. A butterfly backdraft damper accessory is supplied as standard. The QX80HT is IPX4 rated, features double insulation, and is TÜV Rheinland certified. Proudly Made in Italy.
Key features include a humidity sensor that automatically activates or deactivates the unit when the relative humidity exceeds or falls below a user-set level (adjustable between 50% and 95%). It also incorporates a timer function that delays the unit's shutdown for a pre-set duration (adjustable between 1 and 25 minutes).
2. Безбедносне информације
- ПАЖЊА: Ensure that the duct diameter (73.5mm) is suitable for your specific application before installation.
- Always disconnect power before performing any installation, maintenance, or cleaning procedures.
- Installation should be performed by a qualified electrician in accordance with local wiring regulations and standards.
- Немојте користити вентилатор ако је било који део оштећен или недостаје.
- Овај уређај није намењен за употребу од стране особа (укључујући децу) са смањеним физичким, чулним или менталним способностима, или недостатком искуства и знања, осим ако им је дат надзор или упутства о употреби уређаја од стране особе одговорне за њихову безбедност.
- Децу треба надзирати како би се осигурало да се не играју са уређајем.
- Уређај је дизајниран само за унутрашњу употребу.
3. Садржај пакета
The AERAULIQA QX80HT package includes the following components:
- Ventilating unit (QX80HT Centrifugal Extractor Fan)
- Вијци за причвршћивање
- Упутство за инсталацију
- Butterfly backdraft damper accessory (pre-installed or separate)
4. Инсталација
The QX80HT fan can be installed on a wall or ceiling, and is also suitable for recessed installation in plasterboard. Ensure the chosen location allows for proper ventilation and access for maintenance.
4.1. Dimensions and Duct Compatibility
Before installation, verify the dimensions of the fan and ensure compatibility with your existing or planned ductwork. The fan requires a duct diameter of 73.5mm.
слика: Technical drawing illustrating the dimensions (A, B, C, ØD) and weight for both QX80 and QX100 models. For QX80, ØD is 73.5mm.
4.2. Врсте инсталације
The QX80HT supports various installation methods:
- Wall-mounted (surface)
- Wall-mounted (recessed)
- Ceiling-mounted (surface)
- Ceiling-mounted (recessed)
слика: Visual guide demonstrating different installation configurations: perimeter aspiration, surface wall mount, recessed wall mount, surface ceiling mount, and recessed ceiling mount.
4.3. Електрични прикључак
The QX80HT operates on 220-240V 50/60Hz. Ensure all electrical connections are made by a qualified professional and comply with local electrical codes.
The unit features a single-phase 2-speed motor with long-life ball bearings and built-in thermal protection.
5. Операција
5.1. Humidity Sensor Settings
The integrated humidity sensor activates or deactivates the fan based on the ambient relative humidity. The humidity threshold is adjustable between 50% and 95%. Use a small screwdriver to adjust the potentiometer labeled for humidity settings on the control board (refer to the internal diagram in the installation manual for exact location).
5.2. Подешавања тајмера
The timer function allows the fan to continue operating for a pre-set period after the humidity level drops below the threshold or after manual activation. The delay time is adjustable between 1 and 25 minutes. Adjust the potentiometer labeled for timer settings on the control board (refer to the internal diagram in the installation manual for exact location).
5.3. Контрола брзине
The fan features a two-speed motor. The speed setting can typically be configured during installation or via internal jumpers/switches on the control board, depending on the desired airflow and noise level. Consult the detailed wiring diagrams in the full manual for specific speed selection instructions.
слика: Performance curve for the QX80 model, illustrating the relationship between static pressure (Pa) and airflow (m³/h) at different operating points.
6. Одржавање
6.1. Cleaning the Front Cover and Filter
The minimalist design front cover is easily removable for cleaning. Gently detach the cover from the main unit. The internal PP filter, which protects the fan and motor, can then be accessed and removed for cleaning. Wash the filter with mild soap and water, rinse thoroughly, and allow it to dry completely before reinserting. Reattach the front cover securely.
учесталост: Clean the filter and front cover regularly, depending on the operating environment and usage, to maintain optimal performance and airflow.
6.2. Генерално чишћење
Обришите спољашњост вентилатора меком крпомamp cloth. Do not use abrasive cleaners or solvents, as these can damage the ABS material. Ensure no water enters the electrical components.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Вентилатор се не укључује. | No power supply; incorrect wiring; humidity sensor setting too high; timer not activated. | Check power connection; verify wiring with a qualified electrician; adjust humidity sensor to a lower percentage; check timer settings. |
| Смањен проток ваздуха. | Clogged filter; blocked ductwork; fan operating at lower speed setting. | Clean the PP filter; check and clear any obstructions in the ductwork; verify fan speed setting. |
| Прекомерна бука. | Loose mounting; foreign object in fan blades; worn bearings. | Ensure fan is securely mounted; inspect for and remove any foreign objects; if bearings are worn, contact customer support for service. |
| Humidity sensor not responding. | Sensor malfunction; incorrect humidity threshold setting. | Adjust humidity threshold setting; if problem persists, contact customer support. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact AERAULIQA customer support.
8. Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | АЕРАУЛИКА |
| Назив модела | PQX00013 |
| Тип | Центрифугални вентилатор |
| Пречник канала | 73.5мм |
| Снага (Ватtage) | 28W / 17W (Two speeds) |
| Брзина протока ваздуха | 104 m³/h / 62 m³/h (Two speeds) |
| Ниво буке | 38 dB(A) / 27 dB(A) (Two speeds) |
| Волtage | 220-240В, 50/60Хз |
| Мак Температуре | Ночьу 50°Ц |
| ИП Ратинг | ИПКС4 |
| Изолација | Двострука изолација |
| Материјал | High-quality ABS, RAL9010 White |
| Сензор влажности | Adjustable (50% - 95% RH) |
| Тајмер | Adjustable (1 - 25 minutes delay) |
| Тип мотора | Single-phase, 2-speed, long-life ball bearings, thermal protection |
| Цертификати | CE Marking, TÜV Rheinland Certified |
| Земља порекла | Италија |
9. Гаранција и подршка
The AERAULIQA QX80HT is manufactured in Italy and is TÜV Rheinland certified, ensuring high quality and compliance with safety standards.
For warranty information, technical support, or service inquiries, please refer to the contact details provided in your purchase documentation or visit the official AERAULIQA webсајт. Сачувајте доказ о куповини за потребе гаранције.
слика: "Made in Italy" branding, emphasizing product origin and quality.