Hella H7P50TB

HELLA H7P50TB +50 Performance Halogen Headlight Bulb Instruction Manual

1. Производ је готовview

The HELLA H7P50TB +50 Performance Halogen Headlight Bulbs are designed to provide enhanced light output for improved visibility and safety during night driving. These bulbs offer up to 50% more light compared to standard halogen bulbs, ensuring a wider and brighter beam pattern on the road.

HELLA H7 +50 Performance Bulb Twin Blister Packaging

Figure 1: HELLA H7 +50 Performance Bulb Twin Blister Packaging

Key features of the HELLA H7P50TB +50 Performance Bulbs include:

  • Побољшана осветљеност: Up to 50% more light output than standard bulbs for superior road illumination.
  • Оптимални образац снопа: Optimized filament design and silver top coating ensure a wider and brighter light distribution.
  • Квалитет оригиналне опреме: Manufactured to stringent HELLA testing requirements, ensuring reliability and durability.
  • Global Standard Compliance: Meets ECE R37, DOT/SAE, and INMETRO regulations.
  • Twin Blister Packaging: Includes two bulbs, recommended for replacement in pairs to maintain symmetric light output.
Цлосе-уп view of the HELLA H7 +50 Performance Halogen Bulb

Слика 2: Крупни план view of the HELLA H7 +50 Performance Halogen Bulb

2. Безбедносне информације

Увек дајте приоритет безбедности приликом руковања и уградње компоненти аутомобилског осветљења. Непоштовање ових смерница може довести до повреда или оштећења вашег возила.

  • Искључите напајање: Before attempting any installation or maintenance, ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical shock.
  • Избегавајте додиривање стакла: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature bulb failure. Use clean gloves or a lint-free cloth if handling is necessary.
  • Заштита очију: Носите одговарајућу заштиту за очи током инсталације како бисте се заштитили од случајног ломљења или крхотина.
  • Упозорење на топлоту: Халогене сијалице раде на високим температурама. Оставите сијалице да се потпуно охладе пре руковања.
  • Правилно одлагање: Одложите старе сијалице у складу са локалним прописима.
  • Професионална инсталација: Ако нисте сигурни у поступак инсталације, консултујте квалификованог аутомеханичара.

3. Садржај пакета

Your HELLA H7P50TB +50 Performance Halogen Headlight Bulb package contains:

  • Two (2) HELLA H7P50TB +50 Performance Halogen Headlight Bulbs

4. Спецификације

СпецификацијаВалуе
Број моделаH7P50TB
Булб ТипеH7 Halogen
Волtage12 Волтс
Ватtage55 Ваттс
Лигхт ОутпутUp to +50% more light than standard bulbs
БојаSilver base
Тежина артикла1.44 унци
Димензије производа4.72 x 2.36 x 5.91 инча (паковање)
УсклађеностECE R37, DOT/SAE, INMETRO
Technical drawing with dimensions of the HELLA H7 Halogen Bulb

Figure 3: Technical drawing with dimensions of the HELLA H7 Halogen Bulb

5. Инсталација (Подешавање)

Replacing headlight bulbs can vary significantly depending on your vehicle's make and model. Always refer to your vehicle's owner's manual for specific instructions. The following are general steps:

  1. Безбедност на првом месту: Ensure your vehicle is turned off, the parking brake is engaged, and the engine is cool. Disconnect the negative terminal of your car battery.
  2. Приступите сијалици: Locate the headlight assembly. This may require opening the hood, removing a wheel well liner, or accessing from behind the headlight unit.
  3. Уклоните конектор: Disconnect the electrical connector from the back of the old bulb.
  4. Release Old Bulb: Unclip or twist to release the old bulb from its housing. Carefully remove it.
  5. Инсталирајте нову сијалицу: Holding the new HELLA H7P50TB bulb by its base (avoid touching the glass), insert it into the headlight housing. Ensure it is seated correctly and secure it with the clip or twist mechanism.
  6. Поново повежите напајање: Reattach the electrical connector to the new bulb.
  7. Тест: Reconnect the car battery and test the new headlight bulb before reassembling any removed parts.
  8. Замените у паровима: For optimal and symmetric light output, it is highly recommended to replace both headlight bulbs at the same time.

For a visual guide on general halogen bulb replacement, you may find the following video helpful:

Video 1: General Halogen Bulb Replacement Guide (Note: This video demonstrates a general process and may not be specific to your vehicle or the H7P50TB model.)

6. Операција

Once installed, the HELLA H7P50TB bulbs operate as standard halogen headlight bulbs. They will illuminate when your vehicle's headlight system is activated. Ensure your headlights are properly aimed after installation to prevent blinding oncoming traffic and to maximize your visibility.

7. Одржавање

Halogen headlight bulbs generally require minimal maintenance. However, regular checks can prolong their lifespan and ensure optimal performance:

  • Редовна инспекција: Periodically check your headlights for proper function (low beam, high beam).
  • Чиста сочива фарова: Keep your vehicle's headlight lenses clean from dirt, grime, and oxidation to ensure maximum light output.
  • Избегавајте контаминацију: If you need to access the bulbs, ensure the area is clean and avoid touching the bulb glass.
  • Замените у паровима: As bulbs dim over time, replacing them in pairs ensures consistent brightness and beam pattern on both sides of your vehicle.

КСНУМКС. Решавање проблема

If you experience issues with your HELLA H7P50TB bulbs, consider the following troubleshooting steps:

  • Сијалица не светли:
    • Check the electrical connector to ensure it is securely attached.
    • Inspect the bulb for any visible damage or a broken filament.
    • Verify the vehicle's fuse for the headlight circuit.
    • Ensure the bulb is correctly seated in its housing.
  • Пригушено или трепереће светло:
    • Проверите да ли постоје лабаве електричне везе.
    • Inspect the vehicle's charging system and battery.
    • Clean the headlight lens if it is dirty or oxidized.
  • Неравномерни светлосни излаз:
    • Ensure both bulbs are of the same type and age. Replace in pairs for best results.
    • Check if both bulbs are correctly installed and aimed.

If problems persist after performing these checks, it is recommended to consult a professional automotive technician.

9. Гаранција и подршка

HELLA products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your purchase or visit the official HELLA website. For technical support or further assistance, please contact HELLA customer service through their official channels.