Salus RT310

Упутство за употребу дигиталног жичаног термостата Salus RT310

Модел: РТ310

1. Увод

This manual provides instructions for the installation, operation, and maintenance of your Salus RT310 Digital Wired Thermostat. The RT310 is designed to control your heating system, offering a simple and effective way to manage room temperature. Please read this manual thoroughly before installation and use to ensure correct operation and to prevent damage.

2. Безбедносне информације

  • Електричне инсталације: Installation should only be carried out by a qualified electrician or competent person. Ensure the main power supply is disconnected before commencing any electrical work.
  • Волtage: The device operates with 230 Volts. Handle with care.
  • Руковање батеријом: Use only the specified battery type (AA alkaline). Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly.
  • Окружење: Не излажите термостат екстремним температурама, влажности или директној сунчевој светлости.
  • Чишћење: Очистите уређај меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.

3. Садржај пакета

The Salus RT310 package typically includes:

  • Salus RT310 Digital Wired Thermostat
  • 2 к АА алкалне батерије
  • Монтажни вијци и зидни типлови
  • Кориснички приручник (овај документ)

4. Производ је готовview

The Salus RT310 is a digital, non-programmable thermostat designed for straightforward temperature control. It features a clear LCD display and intuitive buttons for adjusting settings.

Salus RT310 Digital Wired Thermostat front view

Слика 1: Предња страна view of the Salus RT310 Thermostat, showing the digital display and control buttons.

Кључне карактеристике:

  • Digital LCD display for current and set temperature.
  • Simple Up/Down buttons for temperature adjustment.
  • Frost protection setting.
  • Sleep mode for energy saving.
  • Backlight for improved visibility in low light conditions.
Salus RT310 Digital Wired Thermostat with dimensions

Figure 2: Salus RT310 Thermostat with approximate dimensions: 10cm width, 10cm height, 3cm depth.

5. Подешавање

5.1 Инсталација батерије

  1. Пажљиво уклоните предњи поклопац термостата.
  2. Пронађите одељак за батерије.
  3. Insert the 2 x AA alkaline batteries, ensuring correct polarity (+/-).
  4. Вратите предњи поклопац, водећи рачуна да се сигурно учврсти на своје место.

5.2 Монтажа

The Salus RT310 is designed for wall mounting. Choose a suitable location away from direct heat sources, drafts, or direct sunlight, which could affect temperature readings. The ideal height is typically 1.5 meters from the floor.

  1. Separate the front panel from the backplate.
  2. Поставите задњу плочу на зид и означите тачке бушења.
  3. Избушите рупе и уметните зидне чепове.
  4. Причврстите задњу плочу за зид помоћу приложених вијака.

5.3 Wiring (230V Control)

WARNING: Ensure the main power supply to your heating system is switched OFF at the consumer unit/fuse box before attempting any wiring. Electrical installation should be performed by a qualified professional.

The Salus RT310 is a wired thermostat. It provides both Normally Open (NO) and Normally Closed (NC) contacts for connection to your heating system. For standard 230V control, you will typically use the COM and NO terminals.

Typical Wiring for Replacement (e.g., from an old analogue thermostat):

  • Identify the wires from your existing thermostat. Common colors are Brown (Permanent Live), Black (Switched Live), Blue (Neutral), and Green/Yellow (Earth).
  • Повежите Permanent Live (Brown) жице за ЦОМ (1) terminal on the RT310.
  • Повежите Switched Live (Black) жице за НЕ (3) terminal on the RT310.
  • Тхе neutralna (plava) wire is generally not required for the RT310 as it is battery-powered. It should be safely terminated in a terminal strip or insulated with electrical tape.
  • Тхе Земља (зелена/жута) wire should be connected to the earth terminal on the back box or safely terminated.

After wiring, carefully attach the thermostat front panel to the backplate. Restore power to your heating system.

6. Операција

6.1 Укључивање

Once batteries are installed and wiring is complete, the thermostat will power on and display the current room temperature.

6.2 Подешавање температуре

Користите Горе (▲) и Доле (▼) buttons to set your desired temperature. The display will show the set temperature briefly, then revert to the current room temperature. The thermostat will activate your heating system if the room temperature falls below your set temperature.

6.3 Позадинско осветљење

Press any button to activate the display backlight for a few seconds, improving visibility in dark conditions.

6.4 Заштита од смрзавања

The RT310 includes a frost protection feature. When enabled, the thermostat will automatically activate the heating if the room temperature drops to a pre-set minimum (e.g., 5°C) to prevent pipes from freezing. Refer to the full manufacturer's manual for specific instructions on enabling/disabling this feature.

6.5 Режим спавања

The thermostat may feature a sleep mode to conserve battery life and energy. Consult the manufacturer's detailed instructions for activating and deactivating sleep mode.

7. Одржавање

7.1 Замена батерије

When the battery low indicator appears on the display, replace the 2 x AA alkaline batteries promptly to ensure continuous operation. Follow the battery installation steps in Section 5.1.

7.2 Чишћење

Wipe the thermostat's exterior with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the device.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Thermostat not turning heating on/off
  • Нетачно ожичење
  • Истрошене батерије
  • Грешка система грејања
  • Check wiring connections (Section 5.3). Ensure COM and NO are correctly connected.
  • Замените батерије.
  • Consult a heating engineer.
Thermostat always calls for heat (relay stuck)
  • Унутрашња грешка
  • Incorrect wiring (less common for this symptom)
  • Disconnect power, remove batteries, wait 5 minutes, then reassemble.
  • If problem persists, contact Salus support or your installer.
Нетачно очитавање температуре
  • Thermostat located near heat source/draft
  • Потребна је калибрација
  • Relocate thermostat if possible.
  • The RT310 may have a temperature offset calibration feature. Refer to the full manufacturer's manual or Salus support for instructions on how to calibrate the temperature reading.
Екран је празан
  • Истрошене батерије
  • Неправилна инсталација батерије
  • Замените батерије.
  • Проверите поларитет батерије.

9. Спецификације

ФеатуреДетаљ
МоделРТ310
Извор напајања2 x AA алкалних батерија (укључених)
Волtage230 Волтс
Дисплаи ТипеЛЦД
Тип монтажеВалл Моунт
Димензије производаApprox. 3 x 10 x 10 cm (Depth x Width x Height)
Тежина производа210 г
Посебне карактеристикеFrost Protection, Sleep Mode, Backlight
Технологија повезивањаWired (Note: Some specifications may incorrectly list Wifi; the RT310 is a wired model.)

10. Гаранција и подршка

For warranty information, technical support, or further assistance, please refer to the official Salus website or contact your local Salus distributor. Keep your proof of purchase for warranty claims.

Произвођач: Салус

Број модела: РТ310

© 2023 Salus. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.