Perel AC028

Perel AC028 Intelligent Charger for 12V Lead-Acid Batteries - 1.5A User Manual

Увод

This manual provides essential instructions for the safe and efficient use of the Perel AC028 Intelligent Charger. This device is specifically designed for charging 12V lead-acid batteries, including Gel, AGM, and EFB types, utilizing a sophisticated 3-stage automatic charging cycle to optimize battery life and performance.

Безбедносна упутства

Always read and understand all safety warnings and instructions before operating the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • This charger is intended for 12V lead-acid batteries (Gel, AGM, EFB) only. Do not use with other battery types.
  • Battery charging can produce explosive gases. Ensure adequate ventilation during charging and keep away from flames, sparks, and smoking materials.
  • Always disconnect the charger from the mains power supply before making or breaking connections to the battery.
  • Avoid charging a frozen battery. Allow it to thaw before attempting to charge.
  • Држите пуњач и батерију ван домашаја деце и кућних љубимаца.
  • Do not expose the charger to rain or excessive moisture. The unit has an IP65 rating, meaning it is protected against dust and low-pressure water jets, but it is not submersible.
  • Ако је кабл за напајање оштећен, мора га заменити произвођач, његов сервисер или слично квалификоване особе како би се избегла опасност.

Карактеристике производа

  • 3-Сtage Automatic Charging Cycle: Ensures optimal charging and extends battery life.
  • Компатибилност батерија: Designed for 12V lead-acid batteries, including Gel, AGM, and EFB types.
  • Декларисаног излаза: 12 ВДЦ, 1.5 А.
  • ИП65 класа заштите: Provides protection against dust ingress and low-pressure water jets from any direction.
  • Компактан дизајн: Лако се складишти и транспортује.

Спецификације

МоделАЦ028
Улазни волtageКСНУМКС-КСНУМКС ВАЦ
Фреквенција50/60 Хз
Оутпут Волtage12 ВДЦ
Излазна струја1.5 А
Називна струја0.25 А
Димензије (Д к Ш к В)147 к 72 к 42 мм
Тежина376 г
Класа ИП заштитеИП65
Компатибилни типови батерија12V Lead-Acid (Gel, AGM, EFB)
Main Cable Length1.5 м
Дужина кабла за пуњење1 м

Сетуп

  1. Ensure the Perel AC028 charger is disconnected from the mains power outlet.
  2. Повежите црвени (+) цлamp of the charger to the positive (+) terminal of the 12V lead-acid battery.
  3. Повежите црни (-) цлamp of the charger to the negative (-) terminal of the 12V lead-acid battery.
  4. Verify that both connections are secure and properly seated to prevent arcing or poor contact.
  5. Plug the charger's main power cable into a suitable 220-240 VAC, 50/60 Hz mains power outlet.
Perel AC028 charger connected to a car battery
Image: The Perel AC028 charger connected to a car battery, demonstrating proper clamp прилог.

Упутство за употребу

Once connected to the battery and mains power, the charger will automatically initiate its 3-stagе процес пуњења.

  • Индикатор напајања: The 'POWER' LED will illuminate when the charger is connected to the mains power supply.
  • Индикатор пуњења: The 'CHARGING' LED will illuminate when the battery is actively being charged.
  • Потпуни индикатор: The 'FULL' LED will illuminate when the battery has reached a full charge. At this point, the charger will switch to a maintenance mode to prevent overcharging.

The charger can remain connected to the battery for extended periods for maintenance charging, ensuring the battery remains at an optimal charge level.

Фронт view of Perel AC028 charger showing Power, Charging, and Full indicator lights
Image: Front panel of the Perel AC028 charger displaying the 'POWER', 'CHARGING', and 'FULL' indicator lights.

Одржавање

  • Regularly inspect the charger's cables, clamps, and casing for any signs of damage, wear, or corrosion. Do not use the charger if any part is damaged.
  • Keep the charger clean and free from dust and debris. Use a dry cloth for cleaning. Do not use solvents or abrasive cleaners.
  • Store the charger in a cool, dry, and well-ventilated area when not in use.
  • Ensure the battery terminals are clean before connecting the charger for optimal contact.

Решавање проблема

The Perel AC028 charger is equipped with error indicators to help diagnose common issues:

Код грешкеОписАкција
Ф01Short circuit / Reverse connection / No connectionCheck battery connections for correct polarity (+ to +, - to -). Ensure clamps are securely attached and there is no short circuit.
Ф02Лабава везаПроверите да ли је батеријаamps are tightly connected to the battery terminals.
Ф03Баттери волtagе превисокоThis charger is for 12V batteries. Ensure you are not attempting to charge a battery with a higher nominal voltage.
Ф04Лоша батеријаThe battery may be severely discharged, damaged, or at the end of its life. It might not be able to accept a charge. Consult a battery specialist.
Назад view of Perel AC028 charger showing specifications and error codes
Image: Rear label of the Perel AC028 charger detailing technical specifications and error code explanations.

Гаранција и подршка

For detailed warranty information, terms, and conditions, please refer to the documentation provided with your purchase or visit the official Perel website. For technical support or service inquiries, contact your retailer or the manufacturer's customer service department.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.