HOLOSUN HE403B-GR / HS403B 2 MOA Green Dot Micro Sight Упутство за употребу

1. Увод

This manual provides instructions for the proper setup, operation, and maintenance of your HOLOSUN HE403B-GR / HS403B 2 MOA Green Dot Micro Sight. Please read this manual thoroughly before using the device to ensure safe and effective operation.

Слика 1.1: Предња страна view of the HOLOSUN HE403B-GR Micro Sight.

2. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• HOLOSUN HE403B-GR / HS403B Micro Sight
• Lower 1/3 Co-witness Mount (1.63")
• Low Mount (0.75")
• ЦР2032 Батерија
• T10 L Key
• Ленс Цлотх
• Rubber Lens Cover

3. Подешавање

3.1. Инсталација батерије

1. Unscrew the battery tray cover located on the side of the sight using the provided T10 L key.
2. Уметните батерију CR2032 са позитивном (+) страном окренутом нагоре.
3. Securely replace the battery tray cover.

3.2. Mounting the Sight

The sight includes two mounts: a lower 1/3 co-witness mount (1.63") and a low mount (0.75"). Choose the appropriate mount for your rifle or carbine application.

1. Attach the desired mount to the bottom of the sight using the provided screws.
2. Place the sight assembly onto your firearm's Picatinny or Weaver rail.
3. Tighten the mount's cross bolt or quick-release lever to secure the sight firmly to the rail. Ensure it is stable and does not wobble.

Слика 3.1: Под углом view of the HOLOSUN HE403B-GR Micro Sight, demonstrating its compact size.

4. Упутство за употребу

4.1. Power On/Off and Brightness Adjustment

• Укључено: Press either the '+' or '-' button to turn on the sight.
• Подешавање осветљености: Use the '+' button to increase brightness and the '-' button to decrease brightness. There are 12 brightness settings: 10 for daylight and 2 for night vision compatibility.
• Искључивање: Press and hold the '+' button for 3 seconds to turn off the sight.

4.2. Shake Awake Technology

The sight features Shake Awake technology to conserve battery life. When the optic detects no motion for a set period (default is 10 minutes), the LED will automatically deactivate. The slightest movement of the optic will instantly reactivate the LED to its last used brightness setting.

Image 4.1: Explanation of Shake Awake Technology.

4.3. Windage and Elevation Adjustment

The windage and elevation adjustments are located on the top and right side of the sight, respectively. Each click adjusts the point of impact by 0.5 MOA.

1. Remove the protective caps from the adjustment turrets.
2. Use a flathead screwdriver or the cap itself to turn the adjustment turrets.
3. Окрените Елеватион turret (top) clockwise to move the point of impact down, and counter-clockwise to move it up.
4. Окрените Виндаге turret (right side) clockwise to move the point of impact right, and counter-clockwise to move it left.
5. After zeroing, replace the protective caps.

Слика 4.2: Бочна страна view of the sight, showing the windage adjustment turret.

4.4. Reticle Information

The HE403B-GR features a 2 MOA Green Dot reticle. The HS403B features a 2 MOA Red Dot reticle. Both models offer a clear, precise aiming point.

Image 4.3: Visual representation of the 2 MOA Green Dot and Red Dot reticles.

5. Одржавање

5.1. Чишћење

To maintain optical clarity, regularly clean the lenses with the provided lens cloth. For stubborn smudges, a small amount of lens cleaning solution designed for optics can be used. Avoid using harsh chemicals or abrasive materials.

5.2. Замена батерије

Replace the CR2032 battery when the reticle dims significantly or fails to illuminate. Refer to Section 3.1 for battery installation steps.

5.3. Складиштење

When not in use, store the sight with the rubber lens cover installed to protect the lenses from dust and scratches. Store in a cool, dry place.

КСНУМКС. Решавање проблема

If you encounter issues with your HOLOSUN Micro Sight, refer to the following common problems and solutions:

• Reticle Not Visible:
  • Check if the sight is powered on.
  • Уверите се да је батерија правилно инсталирана и да је довољно напуњена. Замените је ако је потребно.
  • Adjust brightness settings using the '+' button.
• Reticle Appears Dim or Flickers:
  • Замените ЦР2032 батерију.
  • Уверите се да су контакти батерије чисти и без корозије.
• Zero Not Holding:
  • Verify that the sight is securely mounted to the firearm rail. Check all screws and mounting hardware.
  • Ensure the adjustment turrets are not loose or accidentally moved.

If problems persist after attempting these solutions, please contact HOLOSUN customer support.

7. Спецификације

8. Гаранција и подршка

8.1. Информације о гаранцији

The HOLOSUN HE403B-GR / HS403B Micro Sight is covered by a Доживотна гаранција. For specific details regarding warranty coverage and terms, please refer to the official HOLOSUN webсајту или контактирајте корисничку подршку.

8.2. Корисничка подршка

For technical assistance, warranty claims, or any other inquiries, please visit the official HOLOSUN webсајту или контактирајте њихову службу за кориснике. Контакт информације се обично могу наћи на произвођачевој webсајту.