Увод
The TC Electronic FLUORESCENCE SHIMMER REVERB is a shimmering, super-bright reverb pedal designed to create ethereal reverb sounds. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your pedal.
Слика 1: Врх view of the FLUORESCENCE SHIMMER REVERB pedal.
- Shimmering Reverb: Creates bright, ethereal reverb effects.
- Intuitive 4-Knob Interface: Simple controls for easy sound shaping.
- Прави обилазница: Ensures ultimate signal integrity when the effect is disengaged.
- Издржљива конструкција: Features a robust metal chassis for roadworthy reliability.
Сетуп
Follow these steps to connect your FLUORESCENCE SHIMMER REVERB pedal:
- Прикључак за напајање: Connect a 9V DC, 100mA power adapter (center negative) to the power input jack on the pedal. This pedal operates on corded electric power.
- Улазна веза: Connect your guitar or other instrument to the 1/4 inch (6.35mm) INPUT jack on the pedal using a standard instrument cable.
- Излазна веза: Connect the 1/4 inch (6.35mm) OUTPUT jack of the pedal to your amplifier or the next effect pedal in your signal chain.
- Пласман: For optimal shimmer reverb effects, place the FLUORESCENCE SHIMMER REVERB pedal towards the end of your effects chain, typically after modulation and drive pedals, but before delay pedals.
Слика 2: Задња страна view showing input, output, and power connections.
Управљање педалом
The FLUORESCENCE SHIMMER REVERB pedal features a straightforward 4-knob interface for easy control over your sound:
Figure 3: Control knobs for the FLUORESCENCE SHIMMER REVERB pedal.
- Дугме РЕВЕРБ: Controls the overall decay time and size of the reverb effect. Turning it clockwise increases the length and spaciousness of the reverb.
- Дугме МИКС: Adjusts the balance between your dry (unaffected) signal and the wet (effected) signal. Turn clockwise for more reverb effect, counter-clockwise for less.
- ТОНЕ дугме: Shapes the tonal character of the reverb. This control allows you to brighten or darken the shimmer effect, from warm and subtle to crisp and cutting.
- SHIMMER Knob: This dedicated control adds an octave-up effect to the reverb tail, creating the signature ethereal, shimmering sound. Increase for a more pronounced shimmer.
- ножни прекидач: Engages or disengages the effect. The pedal features true bypass, ensuring your signal remains unaffected when the pedal is off.
Одржавање
To ensure the longevity and optimal performance of your FLUORESCENCE SHIMMER REVERB pedal, follow these maintenance guidelines:
- Чишћење: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Складиштење: Чувајте педалу на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
- Везе: Периодично проверавајте све кабловске спојеве на хабање. Уверите се да су прикључци без прашине и остатака.
- Напајање: Always use a regulated 9V DC, 100mA (center negative) power supply. Using an incorrect power supply can damage the unit and void the warranty.
- Физичка нега: The pedal features a durable metal chassis. However, avoid dropping the unit or subjecting it to excessive force to prevent internal damage.
Решавање проблема
If you encounter issues with your FLUORESCENCE SHIMMER REVERB pedal, consult the following common solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема звука или слаб сигнал | Incorrect cable connections, faulty cables, no power, pedal disengaged. | Verify all cables are securely connected. Test with different cables. Ensure power supply is connected and functional. Press the footswitch to engage the effect. |
| Нема ефекта ревербера | MIX knob set too low, REVERB knob set too low, pedal disengaged. | Increase the MIX and REVERB knob settings. Ensure the pedal is engaged. |
| Нежељена бука или зујање | Faulty power supply, ground loop, interference from other pedals/equipment. | Use a high-quality, isolated power supply. Try connecting the pedal to a different power outlet. Ensure all cables are shielded and in good condition. |
| Shimmer effect is too subtle or too intense | SHIMMER knob setting. | Adjust the SHIMMER knob to achieve the desired intensity. Experiment with the TONE knob to fine-tune the character. |
Спецификације
- Модел: FLUORESCENCE SHIMMER REVERB
- ASIN: B079Y519PH
- Тежина артикла: 1.1 фунте (0.5 килограма)
- Димензије производа: 5.2 к 2.91 к 2.28 инча
- Материјал тела: Метал
- Боја: Плава
- Тип конектора: Аудио прикључак од 6.35 мм (1/4 инча)
- Хардверски интерфејс: 1/4-инчни аудио
- Извор напајања: Цордед Елецтриц
- Волtage: 9V DC (100mA, center negative recommended)
- Датум прве доступности: 27. фебруара 2018. године
Гаранција и подршка
TC Electronic products are designed and manufactured to high standards. For detailed warranty information and technical support, please refer to the official TC Electronic webсајт или директно контактирајте њихову корисничку службу. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.
За даљу помоћ, посетите TC Electronic Store на Амазону.