Упутство за употребу плафонске лампе Rabalux EVANGELINE 7119

Увод

Хвала вам на куповиниasing the Rabalux EVANGELINE 7119 Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Безбедносна упутства

• Инсталацију мора обавити квалификовани електричар у складу са локалним прописима о ожичењу.
• Ensure the power supply is disconnected at the main circuit breaker before installation, maintenance, or bulb replacement.
• Немојте прекорачити максималну снагуtage specified for the light bulbs.
• Овај производ је намењен само за употребу у затвореном простору (заштита IP20). Не излагати влази или екстремним температурама.
• Пажљиво рукујте стакленим компонентама како бисте спречили ломљење.
• Држите материјале за паковање ван домашаја деце.

Садржај пакета

Please check that all components are present and undamaged before proceeding with installation:

• Rabalux EVANGELINE 7119 Ceiling Light fixture (main body with arms and lamp држачи)
• 3 к стаклених сенки
• Прибор за монтажу (шрафови, зидни типлови)
• Упутство за употребу (овај документ)

Сијалице нису укључене и морају се купити засебно.

Подешавање и инсталација

Follow these steps carefully to install your ceiling light. If you are unsure about any step, consult a qualified electrician.

1. Припремите се за инсталацију:
   • Ensure the main power supply to the installation area is switched off at the circuit breaker.
   • Gather necessary tools: screwdriver, wire strippers, drill, pencil, measuring tape.
2. Монтирајте основу причвршћивача:

   Position the mounting bracket (usually integrated into the fixture base) against the ceiling at the desired location. Mark the drilling points with a pencil. Drill holes, insert wall plugs (if necessary), and secure the mounting bracket to the ceiling using the provided screws.

   

   Image: The main body of the Rabalux EVANGELINE 7119 Ceiling Light, showing the central mounting base and the curved metal arms extending outwards. The base is antique bronze colored.
3. Електрични прикључак:

   Connect the household electrical wires to the terminal block on the fixture. Ensure correct polarity: Live (L) to Live, Neutral (N) to Neutral, and Earth (E) to Earth. Double-check all connections are secure.

   • Уживо (Л): Brown or Red wire
   • Неутрално (Н): Blue or Black wire
   • Earth (E): Зелена/жута жица

   Warning: Incorrect wiring can cause electric shock or fire. If in doubt, consult a qualified electrician.
4. Attach the Fixture Body:

   Once wired, carefully attach the main body of the light fixture to the mounting bracket, securing it with the screws or fasteners provided.

5. Инсталирајте сијалице:

   Screw three E14 base light bulbs (max 40W each, LED recommended) into the lamp holders. Do not overtighten.

6. Attach Glass Shades:

   Carefully place each glass shade over its respective lamp holder and secure it according to the fixture's design (e.g., by twisting or using a retaining ring). Ensure they are firmly in place but do not apply excessive force.

   

   Image: The Rabalux EVANGELINE 7119 Ceiling Light with all three ribbed white glass shades attached to the antique bronze arms.

7. Врати снагу:

   Once installation is complete and all components are securely in place, restore power at the main circuit breaker and test the light fixture.

Упутство за употребу

Укључивање/искључивање

The Rabalux EVANGELINE 7119 Ceiling Light is operated via a standard wall switch connected to your household electrical circuit. Flip the switch to turn the light on or off.

Функционалност затамњивања

This fixture is designed to be dimmable. To utilize the dimming feature, you must use dimmable E14 LED bulbs and connect the fixture to a compatible dimmer switch (not included). Follow the dimmer switch manufacturer's instructions for installation and operation.

Замена сијалице

1. Ensure the power supply to the fixture is switched off at the main circuit breaker.
2. Оставите сијалице да се потпуно охладе пре руковања.
3. Carefully remove the glass shade by twisting or releasing its retaining mechanism.
4. Unscrew the old E14 bulb counter-clockwise.
5. Screw in a new E14 bulb (max 40W, LED recommended) clockwise until snug.
6. Чврсто поново причврстите стаклену абажуру.
7. Вратите напајање и тестирајте светло.

Одржавање

Regular cleaning will help maintain the appearance and performance of your light fixture.

• Увек искључите напајање пре чишћења.
• Wipe the metal parts with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
• The glass shades can be gently wiped with a damp cloth and then dried with a soft, lint-free cloth.
• Do not spray cleaning liquids directly onto the fixture.

Решавање проблема

If the problem persists after attempting these solutions, please contact a qualified electrician or Rabalux customer support.

Спецификације

Гаранција и подршка

Rabalux products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Rabalux webсајту.

For technical support, spare parts, or further assistance, please contact your retailer or the Rabalux customer service department.