Keeney K820-75 Universal Button Bathroom Sink Drain with Overflow

Увод

This manual provides instructions for the installation, operation, and maintenance of your Keeney K820-75 Universal Button Bathroom Sink Drain with Overflow. This drain features a solid brass body and a polished chrome finish, designed for durability and ease of use. It is compatible with various sink styles, including pedestal, vessel, drop-in, and undermount sinks that have an overflow and a 1-1/4 inch drain hole.

Image: Keeney K820-75 Universal Button Bathroom Sink Drain in Polished Chrome. This image shows the complete drain assembly, highlighting its polished chrome finish and push-button stopper design.

Подешавање и инсталација

Follow these five steps for proper installation of your sink drain. Ensure your sink has a 1-1/4 inch drain hole and an overflow for this model.

Image: Diagram illustrating the five-step installation process for the Keeney K820-75 sink drain. It shows components being assembled and secured to a bathroom sink.

1. 1. корак: Remove the locknut, friction washer, and sink drain washer from the drain body.
2. 2. корак: Apply a suitable sealant to the underside of the drain flange. Insert the drain body into the sink's drain opening. Напомена: When using sealant, avoid plumber's putty on marble or plastic surfaces as it may cause discoloration.
3. 3. корак: From underneath the sink, place the sink drain washer (beveled side up), followed by the friction washer and the nut onto the drain body. Tighten the nut securely onto the drain body. НЕМОЈТЕ ПРЕТЕГНУТИ.
4. 4. корак: Insert the tailpiece washer into the flanged end of the tailpiece. Place the tailpiece nut onto the tailpiece and hand tighten onto the drain body.
5. 5. корак: Connect the assembly to an extension tube or P-trap. After connection, fill the sink with water and check for any leaks.

Слика: Експлодирана view of the Keeney K820-75 sink drain components, including the stopper, drain body, washers, locknut, and tailpiece. This helps identify each part during installation.

Упутство за употребу

The Keeney K820-75 drain features a simple push-button mechanism for controlling water flow.

• То затворити the drain and retain water in the sink, press the button on the top of the stopper.
• То отворен the drain and allow water to flow out, press the button again. The stopper will release, allowing drainage.

Одржавање и чишћење

Regular cleaning and proper maintenance will ensure the longevity and optimal performance of your sink drain.

Рутинско чишћење

• Да бисте одржали полирани хромирани финиш, редовно чистите меком крпомamp cloth and a mild, non-abrasive soap.
• Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
• Темељно исперите чистом водом и осушите меком крпом како бисте спречили мрље од воде.

Clearing Clogs and Deep Cleaning

The drain's center section is designed to be removable for easy cleaning and clog removal.

1. To remove the stopper assembly, grip the outer rim of the visible stopper disk and pull upward firmly with your fingers. The entire topside assembly is a friction-fit component.
2. Once the topside assembly is removed, you will have clear access to the drain pipe for cleaning out hair, debris, or calcium buildup.
3. Clean the removed stopper assembly and the inside of the drain pipe using appropriate tools and cleaners.
4. After cleaning, reinsert the stopper assembly by aligning it and pressing it down firmly until it seats properly. The large O-ring on the assembly ensures a proper seal.

Решавање проблема

If you encounter issues with your Keeney K820-75 sink drain, refer to the common problems and solutions below.

Leakage from Drain Assembly

• Проблем: Water leaks from around the drain flange or from the threaded connections below the sink.
• Могући узроци и решења:
  • Improper Sealant Application: Ensure a suitable sealant was applied correctly to the underside of the drain flange during installation. Reapply if necessary, avoiding plumber's putty on sensitive surfaces.
  • Incorrect Washer Placement: Verify that the sink drain washer was placed with the beveled side up and that all washers are correctly seated.
  • Overtightening or Undertightening: The nuts should be tightened securely but not excessively. Overtightening can crack components, while undertightening leads to loose seals. Adjust tightness as needed.
  • Incompatible Sink Hole: Confirm that your sink's drain hole diameter is compatible (1-1/4 inch for overflow sinks, or at least 1.60 inches in diameter). An improperly sized sink hole can prevent a proper seal.
  • Оштећене компоненте: Inspect washers, gaskets, and threaded parts for any damage or manufacturing defects. Replace any compromised parts.

Stopper Not Sealing or Releasing Properly

• Проблем: The push-button stopper does not hold water or gets stuck.
• Могући узроци и решења:
  • Debris or Buildup: Remove the stopper assembly (as described in Maintenance) and clean any hair, soap scum, or mineral deposits that may be obstructing its movement or preventing a full seal.
  • O-ring Issue: Check the large O-ring on the stopper assembly for damage or misalignment. Ensure it is properly seated and intact.

Спецификације

Image: Technical drawing showing the key dimensions of the Keeney K820-75 sink drain, including overall height, stopper diameter, and tailpiece diameter, along with minimum sink opening requirements.

Информације о гаранцији

This Keeney K820-75 Universal Button Bathroom Sink Drain is covered by a 1-годишња ограничена гаранција from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact customer support.

Корисничка подршка

If you have any questions, require assistance with installation, or need to report a warranty claim, please contact Plumb Pak customer service. Refer to the packaging or the manufacturer's website for the most current contact information, including phone numbers and email addresses.