Einhell TC-TC 800 Tile Cutter Instruction Manual

1. Производ је готовview

The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.

Кључне карактеристике:

• Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
• Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
• Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
• Капацитет сечења: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
• Безбедност стражар: A protective guard for the cutting disc ensures user safety from chips and dust.

2. Безбедносна упутства

Увек прочитајте и разумејте сва безбедносна упозорења, упутства, илустрације и спецификације које се испоручују са овим електричним алатом. Непоштовање свих доле наведених упутстава може довести до струјног удара, пожара и/или озбиљних повреда.

Општа безбедносна упозорења:

• Носите одговарајућу личну заштитну опрему (ЛЗО), укључујући заштитне наочаре, заштиту за уши и рукавице.
• Уверите се да је радни простор чист, добро осветљен и без препрека.
• Држите подаље децу и особе у близини док користите алат.
• Never operate the tool if the power cord or plug is damaged.
• Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
• Користите одговарајуће сечиво за материјал који се сече.
• Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.

3. Цомпонентс Оверview

Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:

• Cutting Table (Stainless Steel)
• Diamond Cutting Disc (180 mm diameter)
• Моторна јединица
• Ватер Ресервоир
• Cutting Guide with Scale
• Angle Stop (-45° to +45°)
• Бладе Гуард
• Прекидач за укључивање/искључивање
• Дршка за ношење

Слика 1: Завршеноview of the Einhell TC-TC 800 Tile Cutter with its main parts.

4. Подешавање

Before operating the tile cutter, ensure proper setup for safety and optimal performance.

4.1 Распакивање и преглед

1. Пажљиво уклоните све компоненте из паковања.
2. Inspect the tool for any signs of damage during transit. Do not operate if damaged.
3. Уверите се да су све наведене компоненте присутне.

4.2 Пуњење резервоара за воду

The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.

1. Locate the water reservoir beneath the cutting table.
2. Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
3. Редовно проверавајте ниво воде током рада и допуњавајте по потреби.

Figure 2: Filling the water reservoir for wet cutting.

4.3 Adjusting the Cutting Guide and Angle Stop

For accurate cuts, adjust the cutting guide and angle stop as required.

1. The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
2. For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.

Figure 3: Adjustable angle stop for miter cuts.

5. Упутство за употребу

Follow these steps for safe and effective tile cutting.

5.1 Укључивање/искључивање

1. Connect the tile cutter to a suitable power outlet (240 Volts).
2. To turn on, press the green 'ON' button.
3. To turn off, press the red 'OFF' button.

Figure 4: Power switch for turning the machine on and off.

5.2 Прављење реза

1. Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
2. Ensure the water pump is active and water is flowing to the blade.
3. Turn on the tile cutter.
4. Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
5. Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.

Figure 5: Demonstrating a tile being cut with the machine.

5.3 Official Product Video: How to Use

6. Одржавање

Regular maintenance ensures the longevity and performance of your tile cutter.

6.1 Cleaning the Water Reservoir

After each use, clean the water reservoir to prevent buildup of tile dust and debris.

1. Искључите напајање.
2. Remove the cutting table or access panel to reach the reservoir.
3. Empty the dirty water and thoroughly clean the reservoir with fresh water.
4. Поново саставите компоненте.

6.2 Замена оштрице

Replace the diamond cutting disc when it becomes dull or damaged.

1. Уверите се да је алат искључен из струје.
2. Use the provided tool to loosen the blade retaining nut.
3. Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
4. Tighten the retaining nut securely.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your tile cutter.

8. Спецификације

9. Гаранција и подршка

9.1 Информације о гаранцији

This Einhell product comes with a 2-годишња ограничена гаранцијаМолимо вас да сачувате доказ о куповини за евентуалне рекламације.

9.2 Корисничка подршка

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webвеб-сајт или паковање вашег производа за најновије контакт информације.