PROEL V10PLUS Monitor Speaker User Manual

1. Увод

The PROEL V10PLUS is a high-performance, bi-amplified 2-way monitor speaker designed for professional audio applications. It integrates a powerful 600W Class D + AB amplifier with Switch-Mode Power Supply (SMPS) technology, ensuring efficient and clear sound reproduction. Its lightweight, reinforced polypropylene cabinet and ergonomic handle provide excellent portability, while its trapezoidal shape allows for versatile use as a stage monitor or for fixed installations.

2. Кључне карактеристике

• Би-amplified 2-way design: Features a 1-inch neodymium compression driver and a 10-inch woofer with a 2-inch voice coil.
• Моћно Ampослобођење: 600W total power (Class D + AB amplifier with SMPS).
• Integrated Active Processor: Includes a dual LIMITER circuit for undistorted sound even at high levels.
• Разноврсни улази: MIC/LINE input with two-band EQ for flexible audio source connection.
• Индикатори статуса: Front LED for power (ON) and signal/clip indication.
• Високи излаз: Maximum SPL of 123dB.
• Широки фреквентни одзив: 60Hz - 20kHz.
• Издржљив и преносив дизајн: Ultralight reinforced polypropylene cabinet with a comfortable carry handle.
• Флексибилно постављање: Trapezoidal shape for use as a stage monitor and four M10 suspension points for installation.
• Компактан и лаган: Product dimensions of 25 x 35 x 30 cm and a total weight of 10 kg.

3. Подешавање

Proper setup ensures optimal performance and longevity of your PROEL V10PLUS speaker. Follow these steps for initial configuration:

3.1 Распакивање и преглед

Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.

3.2 Постављање

The V10PLUS is designed for various applications:

• Подни монитор: Position the speaker on the floor using its angled profile за сtagе мониторинг.
• Сталак за звучнике: Utilize the integrated pole mount socket on the bottom of the speaker to mount it on a standard speaker stand.
• суспензија: Use the four M10 suspension points for fixed installations. Ensure proper rigging hardware and safety procedures are followed by qualified personnel.

Figure 3.2.1: PROEL V10PLUS in stage monitor position.

3.3 Везе

Refer to the rear panel image for connection points.

Слика 3.3.1: Прикључци и контроле на задњој плочи.

1. Прикључак за напајање: Connect the supplied AC power cable to the POWER input on the rear panel and then to a suitable electrical outlet. Ensure the voltage matches the speaker's requirements (220-240V~ 50/60Hz).
2. Аудио улаз: Connect your audio source (mixer, microphone, instrument) to the INPUT section. The V10PLUS features a combo XLR/TRS input.
• For microphone signals, use the MIC/LINE switch to select 'MIC'.
• For line-level signals (e.g., from a mixer), select 'LINE'.
3. Излаз везе: The LINK output (XLR) allows you to send the input signal to another V10PLUS speaker or another audio device.

4. Упутство за употребу

Once connected, follow these steps to operate your PROEL V10PLUS speaker:

1. Укључено: Ensure all connections are secure and the LEVEL knob is set to minimum. Flip the POWER switch to the 'ON' position. The front LED will illuminate to indicate power.
2. Избор улаза: Set the MIC/LINE switch according to your input source (MIC for microphones, LINE for line-level devices).
3. Подешавање јачине звука: Slowly increase the LEVEL knob to achieve the desired volume. Monitor the front LED: it should primarily show 'SIGNAL' (green). If it frequently shows 'CLIP' (red), reduce the input level from your source or the speaker's LEVEL knob to prevent distortion.
4. Контрола тонова: Use the HIGH and LOW EQ knobs to adjust the treble and bass frequencies to suit your preference or acoustic environment.
5. Искључивање: Before disconnecting power or cables, turn the LEVEL knob to minimum and then flip the POWER switch to 'OFF'.

5. Одржавање

Regular maintenance helps preserve the performance and appearance of your speaker.

• Чишћење: Use a soft, dry cloth to clean the cabinet. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes.
• Чишћење решетки: The metal grille can be gently cleaned with a soft brush or vacuum cleaner to remove dust.
• Складиштење: When not in use for extended periods, store the speaker in a dry, cool place, ideally in its original packaging or a protective cover, away from direct sunlight and extreme temperatures.
• Инспекција каблова: Periodically check all power and audio cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.

Caution: Do not attempt to open the speaker cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your PROEL V10PLUS speaker.

If the problem persists after trying these solutions, please contact PROEL customer support or an authorized service center.

7. Спецификације

Detailed technical specifications for the PROEL V10PLUS speaker:

8. Гаранција и подршка

8.1 Информације о гаранцији

This PROEL V10PLUS speaker comes with an extended warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official PROEL webсајт или контактирајте овлашћеног продавца. Сачувајте доказ о куповини за потребе гаранције.

8.2 Корисничка подршка

For technical assistance, service, or spare parts, please contact PROEL customer support. You can find contact information and additional resources, including FAQs and product documentation, on the official PROEL webсајт (ввв.проел.цом). Please have your product model number (V10PLUS) and serial number ready when contacting support.