EPEVER MPPT Solar Charge Controller 40A Tracer4210AN-G3 Instruction Manual

1. Производ је готовview

The EPEVER Tracer4210AN-G3 is an advanced Maximum Power Point Tracking (MPPT) solar charge controller designed for off-grid solar systems. It efficiently manages power flow from solar panels to batteries, ensuring optimal charging and extending battery life. This model supports both 12V and 24V battery systems automatically and is compatible with various battery types, including lead-acid and lithium-ion.

This package includes the Tracer4210AN-G3 controller, an MT52 remote meter for monitoring and parameter setting, and a temperature sensor cable (RTS300R47K3.81A) for accurate temperature compensation.

2. Кључне карактеристике

• Ултра-брза брзина праћења и загарантована ефикасност праћења.
• Advanced MPPT control algorithm to minimize maximum power point loss rate and loss time.
• Compatible with lead-acid (Sealed, Gel, Flooded, User) and lithium-ion (LiFePO4, Li(NiCoMn)O2, User) batteries.
• Уобичајени дизајн негативног уземљења.
• Rated charge current: 40A.
• Max. PV input power: 520W (12V battery) / 1040W (24V battery).
• Макс. ПВ отворено коло волtagе: 100ВДЦ.
• Automatic 12V/24V system voltagе препознавање.
• Auto-saving function with two voltage disconnect levels.
• Charging power and current limitation function.
• Индепендент волtage regulation constant voltage output function.
• Battery temperature compensation function (for lead-acid batteries).
• Overheating power reduction function.
• MT52 Remote Meter for real-time data display, alarm information, and diversified load control modes.

3. Садржај пакета

Пакет производа обично садржи следеће ставке:

• 1 x Tracer4210AN-G3 MPPT Solar Charge Controller
• 1 x Remote Meter MT52
• 1 x Temperature Sensor Cable (RTS300R47K3.81A)
• 1 к РС485 кабл
• 2 x User Manuals (one for controller, one for MT52)

4. Упутства за инсталацију

Always Connect the Battery First!

Please read the complete installation instructions to familiarize yourself with the installation steps before proceeding. Do not use electric screwdrivers for connections.

4.1. Dijagram ožičenja

The diagram above illustrates the typical system connection. Ensure all components are connected in the correct order to prevent damage.

4.2. Кораци повезивања

1. Повежите батерију: Connect the battery to the charge controller first. Ensure correct polarity (+ to + and - to -).
2. Повежи оптерећење: Connect the DC load to the charge controller.
3. Connect Solar Panel (PV Array): Connect the solar panel to the charge controller last.

4.3. Disconnection Steps

To disconnect the system, reverse the connection order:

1. Disconnect Solar Panel (PV Array): Disconnect the solar panel first.
2. Прекини оптерећење: Disconnect the DC load.
3. Искључите батерију: Disconnect the battery last.

4.4. Detailed Wiring

Ensure all wires are securely fastened in their respective terminals. The controller features terminals for Solar Panel (10mm²/8AWG), Battery (10mm²/8AWG), and Load (10mm²/8AWG).

4.5. Connecting Remote Meter (MT52)

The MT52 remote meter connects to the COM port on the charge controller using an RS485 cable. This allows for remote monitoring and parameter adjustments.

4.6. Connecting to PC for Monitoring

For advanced monitoring and parameter setting, the controller can be connected to a PC using a CC-USB-RS485-150U cable. This allows access to the EPEVER PC software for detailed system analysis.

5. Упутство за употребу

5.1. LCD Display Overview

The controller features an LCD display for real-time monitoring of system status and parameters. Use the 'SELECT' and 'ENTER' buttons to navigate through the menus.

5.2. Подешавање типа батерије

The controller supports various battery types. To set the battery type:

1. Press the "ENTER" button and hold for 5 seconds under the battery voltagе интерфејс.
2. Press the "SELECT" button when the battery type interface is flashing to cycle through options (Sealed, Gel, Flooded, LiFePO4, Li(NiCoMn)O2, User).
3. Press the "ENTER" button to confirm the battery type.

For lithium batteries, specific series configurations are available (e.g., LiFePO4 4s/8s, Li(NiCoMn)O2 3s/6s).

5.3. Setting Load Working Mode

The MT52 remote meter allows for diversified load control modes:

• Ручна контрола
• Светло ОН/ОФФ
• Светло укључено + тајмер
• Контрола времена

Refer to the MT52 User Manual for detailed instructions on setting these modes.

5.4. Setting Battery Parameters (via MT50/MT52)

For advanced battery parameter settings, use the MT50/MT52 remote meter. Navigate to 'Control Para.' in the menu interface. You can adjust parameters such as Over Voltage Disconnect, Charging Limit, Equalize Charging, Boost Charging, Float Charging, Low Voltage Reconnect, and Discharge Limit. When setting parameters for 'USER' battery type, ensure the voltage parameters follow the specified logic (e.g., Over Voltagе Дисцоннецт Волtagе > Цхаргинг Лимит Волtagи).

6. Спецификације

7. Electronic Protections

The Tracer4210AN-G3 controller includes multiple electronic protections to ensure safe operation:

• ПВ преко струје/снаге
• ПВ кратки спој
• ПВ обрнути поларитет
• Ноћно обрнуто пуњење
• Обрнути поларитет батерије
• Баттери Овер Волtage
• Батерија прекомерно пражњена
• Прегревање батерије
• Прегревање контролера
• Ниска температура литијумске батерије
• Кратак спој у оптерећењу
• Лоад Оверлоад
• ТВС Хигх Волtagе Транзијенти

КСНУМКС. Решавање проблема

If you encounter issues with your EPEVER MPPT Solar Charge Controller, consider the following:

• Без дисплеја/напајања: Ensure the battery is correctly connected and has sufficient voltage. Check all wiring for loose connections or incorrect polarity.
• Без пуњења: Verify solar panel connections and ensure adequate sunlight. Check PV input voltage and current on the display. Confirm battery type settings are correct.
• Учитавање не ради: Check load connections and ensure the load is not overloaded or short-circuited. Verify load control mode settings on the MT52.
• Абнормална очитавања: Ensure temperature sensor is correctly connected and not damaged. Check communication cables for secure connections.

For persistent issues, refer to the detailed troubleshooting section in the full user manual or contact EPEVER technical support.

9. Информације о подршци

For technical assistance, product inquiries, or warranty claims, please contact EPEVER's authorized sales agent, Goland Century. They offer free technical support and have service centers in various regions.

Контакт информације:

• техничка подршка: Available through Goland Century technicians.
• Преузимање софтвера: EPEVER PC software can be downloaded from the official EPEVER webсајту.

Please refer to the official EPEVER website or your product documentation for the most up-to-date contact details and support resources.