DAKASON 30W LED Wall Pack Instruction Manual

Увод

Thank you for choosing the DAKASON 30W LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting with features such as a dusk-to-dawn photocell and an adjustable head. This manual provides essential information for safe installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and keep it for future reference.

Image: DAKASON 30W LED Wall Pack with adjustable head installed on a building exterior, illuminating the area below.

Безбедносне информације

Please observe the following safety precautions during installation and operation:

• УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање преко осигурача или прекидача пре инсталације или сервисирања.
• Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances.
• Уверите се да је залиха волtage is compatible with the fixture's requirements (100-277V AC).
• Не рукујте уређајем мокрим рукама или када стојите на мокрој илиamp површине.
• This fixture is designed for outdoor use and is IP65 rated for wet locations.
• Do not attempt to modify or disassemble the fixture beyond what is described in this manual.

Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

• DAKASON 30W LED Wall Pack Fixture (x2 for 2-pack)
• Photocell (pre-installed)
• Non-photocell cover (for disabling photocell function)
• Mounting hardware (screws, wire nuts)
• Упутство за употребу

Карактеристике производа

• Енергетски ефикасан: Consumes 30 watts, replacing 100-150 watt metal halide lights, saving up to 80% energy.
• Built-in Photocell: Automatically turns the light on at dusk and off at dawn. Can be converted to non-photocell operation.
• Подесива глава: Fixture angle can be adjusted 0-90 degrees for precise light direction.
• Издржљива конструкција: Made of die-cast aluminum housing and tempered glass lens, IP65-rated waterproof and vibration resistant.
• Дуг животни век: Maintenance-free LEDs with 50,000 hours of life.

Подешавање и инсталација

Follow these steps for proper installation of your DAKASON LED Wall Pack. Ensure power is disconnected before starting.

1. Монтирање уређаја

1. Choose a suitable mounting location on a wall or vertical surface, ensuring it can support the fixture's weight.
2. Securely attach the mounting plate to the junction box or wall using appropriate screws and anchors (not included, if required for your surface).
3. Ensure the mounting plate is oriented correctly, typically with 'UP' arrow pointing upwards, to allow proper hinge function.

Image: Diagram illustrating the junction box mounting process, showing the fixture opened to reveal wiring and the separate mounting plate.

2. Ожичење

1. Connect the fixture's black wire to the supply's live/hot wire.
2. Connect the fixture's white wire to the supply's neutral wire.
3. Connect the fixture's green/ground wire to the supply's ground wire.
4. Use appropriate wire nuts to secure all connections. Ensure connections are tight and insulated.
5. Пажљиво увуците све жице у разводну кутију.

3. Securing the Fixture

1. Attach the fixture body to the mounted plate, ensuring it is securely hinged.
2. Close the fixture and tighten any securing screws to ensure a watertight seal.

Image: DAKASON LED Wall Pack installed on a building during heavy rain, demonstrating its IP65 waterproof rating for wet locations.

4. Photocell Configuration (Optional)

The fixture comes with a pre-installed photocell for dusk-to-dawn operation. If you prefer to control the light with a wall switch, you can replace the photocell with the included non-photocell cover.

1. To disable the photocell, carefully disassemble the housing of the lamp to access the photocell.
2. Pull out the existing photocell.
3. Screw in the non-photocell cover into the opening.
4. Поново саставите лamp становање.

Image: Diagram illustrating the steps to convert the LED wall pack from photocell to non-photocell operation by replacing the sensor with a cover.

Упутство за употребу

Пхотоцелл Оператион

If the photocell is installed, the fixture will automatically turn on when ambient light levels drop (dusk) and turn off when light levels rise (dawn). Ensure the photocell is not obstructed by objects or other light sources, which could interfere with its operation.

Image: Close-up of the photocell sensor on the DAKASON LED Wall Pack, illustrating its function to automatically turn on at dusk and off at dawn.

Подешавање светлеће главе

The fixture's head can be adjusted to direct light as needed. Loosen the adjustment screw on the side of the fixture, pivot the light head to the desired angle (0-90 degrees), and then securely tighten the screw to lock it in place.

Image: Diagram illustrating the 0-90 degree adjustable head feature of the LED wall pack, showing the range of motion.

Одржавање

The DAKASON LED Wall Pack is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance.

• Чишћење: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, damp крпа. Не користите абразивна средства за чишћење или раствараче, јер могу оштетити завршну обраду или сочиво.
• инспекција: Periodically check the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
• The LEDs are integrated and not user-replaceable.

Решавање проблема

If you encounter issues with your LED Wall Pack, refer to the following common problems and solutions:

Спецификације

Image: Dimensions diagram for the DAKASON 30W LED Wall Pack, showing length, width, and height measurements.

Информације о гаранцији

This DAKASON LED Wall Pack comes with a 5 година гаранције. The warranty is provided by the seller. Please retain your proof of purchase for any warranty claims.

Корисничка подршка

For any questions, concerns, or issues regarding your DAKASON LED Wall Pack, please contact us through the Amazon Buyer-Seller Messaging Service. Our support team is available to assist you.