Zerone Bluetooth MP3 WMA Decoder Board 8541723136 Instruction Manual

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your Zerone Bluetooth MP3 WMA Decoder Board. Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Производ је готовview

The Zerone Bluetooth MP3 WMA Decoder Board is a versatile audio module designed to add modern connectivity to existing audio systems. It supports music playback from USB drives, TF cards, and Bluetooth-enabled devices. Additionally, it features an FM radio tuner and hands-free calling capabilities.

Кључне карактеристике:

• Bluetooth hands-free call support.
• Compatible with APE, FLAC, WAV, WMA, and MP3 lossless audio formats.
• Supports USB disk, TF card, Bluetooth, and FM radio modes.
• Power-off memory function retains last settings.
• Blue backlight display for clear visibility.
• Укључује даљински управљач за практично руковање.
• Multiple EQ sound modes and mute function.

Садржај пакета:

• 1 x Bluetooth Decoder Board
• 1 к даљински управљач
• 1 x 2-pin Power Cable
• 2 x 3-pin Audio Output Cables

Слика 2.1: Предња страна view of the decoder board, highlighting the USB port, TF card slot, display, and control buttons.

3. Подешавање

Careful wiring is essential for the correct operation of the decoder board. Ensure all connections are secure before applying power.

3.1 Прикључак за напајање

The decoder board can be powered via two methods:

• ДЦ 7В-12В: Use the provided 2-pin power cable to connect to a DC power source within this voltage range. Observe polarity (red for positive, black for negative).
• 5V Micro USB: Alternatively, power the board using a 5V Micro USB cable connected to the Micro USB port.

The operating current required is 800mA-1A.

3.2 Повезивање аудио излаза

Use the provided 3-pin cables to connect the audio output of the decoder board to your amplifier or active speakers. These cables typically provide left, right, and ground audio signals.

3.3 Повезивање FM антене

For optimal FM radio reception, connect an external antenna wire to the designated FM ANT hole located on the bottom back of the board. A simple wire can significantly improve signal strength.

Слика 3.1: Задња страна view of the decoder board, illustrating the wiring points for power and audio output.

Слика 3.2: Горњи и доњи део views of the decoder board, providing a comprehensive look at its internal structure and connection interfaces.

4. Упутство за употребу

The decoder board offers multiple playback modes and functions, controllable via the front panel buttons or the included remote control.

4.1 Укључивање/искључивање

Connect the power supply. The board will automatically power on. To power off, use the power button on the remote control. If power is disconnected, the board will power on automatically when reconnected.

4.2 Избор режима

Притисните тастер МОДЕ button on the front panel or remote control to cycle through available modes: USB, TF, Bluetooth, and FM.

Figure 4.1: Illustration of the various input modes supported by the decoder board.

4.3 Репродукција са USB/TF картице

Insert a USB flash drive into the USB port or a TF card into the TF card slot. The board will automatically switch to the respective mode and begin playing supported audio files (APE, FLAC, WAV, WMA, MP3).

4.4 Блуетоотх режим

1. Switch the decoder board to Bluetooth mode using the МОДЕ button. The display will indicate Bluetooth mode.
2. On your mobile device, search for Bluetooth devices and select the one corresponding to the decoder board (e.g., "Bluetooth Speakers").
3. Once paired, you can play audio from your device through the decoder board.

4.5 Режим ФМ радија

1. Switch the decoder board to FM mode.
2. Аутоматско скенирање: Притисните и држите ПЛАИ/ПАУСЕ button to initiate an automatic scan for FM stations. The board will scan and save available stations as presets. Ensure an FM antenna is connected for best results.
3. Промена станица: Кратко притисните на ПЛАИ/ПАУСЕ button to cycle through saved presets. Use the ВОЛ+ or ВОЛ- buttons (short press) to manually tune up or down frequencies.

4.6 Позивање без употребе руку

When a call is received in Bluetooth mode, the music will pause. Press the ПЛАИ/ПАУСЕ button to answer the call. Press it again to end the call. The integrated microphone allows for hands-free communication.

Figure 4.2: The decoder board supports hands-free calls when connected via Bluetooth.

4.7 Контрола јачине звука

Притисните и држите ВОЛ+ or ВОЛ- buttons on the front panel or remote control to adjust the volume level.

4.8 Функције даљинског управљача

The remote control provides convenient access to all functions. Refer to the remote control diagram for button layout.

Слика 4.3: Детаљно view of the remote control, showing various function buttons.

Figure 4.4: The remote control allows for convenient operation from a distance.

5. Одржавање

To ensure the longevity and optimal performance of your decoder board, follow these simple maintenance guidelines:

• Чишћење: Use a soft, dry cloth to clean the surface of the board. Avoid using liquid cleaners or solvents, as they may damage the components.
• Окружење: Operate the board in a dry environment, away from excessive heat, moisture, and direct sunlight.
• Везе: Периодично проверавајте све спојеве ожичења како бисте били сигурни да су безбедни и да немају корозије.
• Складиштење: Ако складиштите уређај дуже време, искључите га из извора напајања и чувајте га на хладном и сувом месту.

КСНУМКС. Решавање проблема

If you encounter issues with your decoder board, refer to the following common problems and solutions:

7. Спецификације

8. Гаранција и подршка

For product support, technical assistance, or inquiries regarding your Zerone Bluetooth MP3 WMA Decoder Board, please refer to the official Zerone brand store or contact your retailer. Specific warranty details may vary by region and retailer.

Посетите Zerone Store за више информација.