HIOKI IR4051-10, 3280-10F

HIOKI IR4051-10 Digital Insulation Tester & 3280-10F AC Clamp Метер Усер Мануал

Model: IR4051-10, 3280-10F

1. Безбедносне информације

Read this manual thoroughly before using the HIOKI IR4051-10 Digital Insulation Tester and HIOKI 3280-10F AC Clamp Meter. Improper operation can lead to injury or damage to the instruments. Keep this manual in a safe place for future reference.

Опште мере предострожности

  • Always observe local and national safety regulations.
  • Do not use the instruments if they appear damaged or are operating abnormally.
  • Ensure correct measurement range selection before testing.
  • Носите одговарајућу личну заштитну опрему (ЛЗО), као што су изоловане рукавице и заштита за очи.
  • Avoid touching live circuits with bare hands or non-insulated parts of the test leads.
  • Disconnect power to the circuit before connecting or disconnecting test leads for resistance or continuity measurements.
  • Do not exceed the maximum input ratings for each function.

2. Производ је готовview

This manual covers the operation of two HIOKI electrical measurement instruments: the IR4051-10 Digital Insulation Tester and the 3280-10F AC Clamp Метар.

2.1 HIOKI IR4051-10 Digital Insulation Tester

The HIOKI IR4051-10 is a 5-range digital insulation resistance tester designed for ease of use and durability. It features stable and high-speed measurements, a comparator function with a 0.8-second response time, and a robust, drop-proof design capable of withstanding a 1-meter fall onto concrete. It includes a high-brightness white LED backlight for improved visibility in dark environments and a test lead with an integrated light. The device also offers a 200mA continuity check function and DC voltage measurement capabilities, making it suitable for various electrical testing applications, including solar power systems and electric vehicles.

HIOKI IR4051-10 Digital Insulation Tester in its protective case with test leads connected.

Figure 2.1.1: HIOKI IR4051-10 Digital Insulation Tester with test leads.

HIOKI IR4051-10 Digital Insulation Tester with its case open, showing the test leads stored inside.

Figure 2.1.2: HIOKI IR4051-10 Digital Insulation Tester with open case for lead storage.

2.2 HIOKI 3280-10F AC Clamp Метер

The HIOKI 3280-10F is a thin and robust AC clamp meter, an essential tool for electricians. It allows for easy measurement of AC current, AC voltagе, ДЦ волtage, resistance, and continuity. Its compact design with a jaw thickness of 9.5mm enables measurements in confined spaces. The meter supports an optional AC flexible current sensor (CT6280) for enhanced versatility and features an expanded operating temperature range for use in diverse environments.

HIOKI 3280-10F AC Clamp Meter, front view.

Figure 2.2.1: HIOKI 3280-10F AC Clamp Метар.

HIOKI 3280-10F AC Clamp Meter with test leads and carrying case.

Figure 2.2.2: HIOKI 3280-10F AC Clamp Meter with accessories.

3. Подешавање

3.1 HIOKI IR4051-10 Digital Insulation Tester

Инсталација батерије

  1. Уверите се да је инструмент ИСКЉУЧЕН.
  2. Пронађите одељак за батерију на задњој страни уређаја.
  3. Отворите поклопац батерије.
  4. Insert four (4) AA alkaline batteries (LR6), observing correct polarity.
  5. Добро затворите поклопац батерије.

Повезивање пробних водича

  1. Connect the red test lead to the LINE terminal and the black test lead to the EARTH terminal.
  2. Уверите се да су везе чврсте и безбедне.

3.2 HIOKI 3280-10F AC Clamp Метер

Инсталација батерије

  1. Уверите се да је инструмент ИСКЉУЧЕН.
  2. Пронађите одељак за батерије.
  3. Отворите поклопац батерије.
  4. Insert one (1) CR2032 coin-type lithium battery, observing correct polarity.
  5. Добро затворите поклопац батерије.

Повезивање пробних водича

  1. Повежите црвени испитни кабл са ВΩ терминалом, а црни испитни кабл са ЦОМ терминалом.
  2. Уверите се да су везе чврсте и безбедне.

4. Упутство за употребу

4.1 HIOKI IR4051-10 Digital Insulation Tester

Мерење отпора изолације

  1. Turn the rotary switch to the desired insulation resistance voltagе (50В, 125В, 250В, 500В или 1000В).
  2. Прикључите испитне водове у круг који се испитује.
  3. Press and hold the MEASURE button. The measurement will begin, and the result will be displayed.
  4. Release the MEASURE button to stop the measurement. The circuit will automatically discharge.

ДЦ Волtagе Мерење

  1. Turn the rotary switch to the 'V.' position.
  2. Connect the test leads across the DC voltagе извор.
  3. ДЦ волtagе вредност ће бити приказана.

АЦ Волtagе Мерење

  1. Turn the rotary switch to the 'V.' position. The meter will automatically detect AC or DC.
  2. Спојите мерне каблове преко AC волтаtagе извор.
  3. Тхе АЦ волtagе вредност ће бити приказана.

Low Resistance Measurement (Continuity Check)

  1. Окрените ротациони прекидач у положај „Ω“.
  2. Connect the test leads to the circuit or component to be checked.
  3. The resistance value will be displayed. If the resistance is below a certain threshold (e.g., 6Ω), the continuity buzzer will sound.

4.2 HIOKI 3280-10F AC Clamp Метер

Мерење наизменичне струје

  1. Окрените ротациони прекидач у положај „A~“.
  2. Отворите цлamp jaws and enclose a single conductor. Ensure the jaws are fully closed.
  3. The AC current value will be displayed.

АЦ Волtagе Мерење

  1. Turn the rotary switch to the 'V~' position.
  2. Connect the test leads in parallel to the AC voltagе извор.
  3. Тхе АЦ волtagе вредност ће бити приказана.

ДЦ Волtagе Мерење

  1. Turn the rotary switch to the 'V=' position.
  2. Connect the test leads in parallel to the DC voltage source, observing polarity.
  3. ДЦ волtagе вредност ће бити приказана.

Ресистанце Меасуремент

  1. Окрените ротациони прекидач у положај „Ω“.
  2. Уверите се да је коло без напона.
  3. Connect the test leads across the component to measure resistance.
  4. Вредност отпора ће бити приказана.

Провера континуитета

  1. Окрените ротациони прекидач у положај „Ω“.
  2. Уверите се да је коло без напона.
  3. Повежите мерне каблове преко кола или компоненте.
  4. If continuity exists (resistance below threshold), the buzzer will sound.

5. Одржавање

Замена батерије

Replace batteries when the low battery indicator appears on the display. Refer to the 'Battery Installation' section for specific instructions for each model.

Чишћење

Обришите инструмент меком, сувом крпом. За тврдокорну прљавштину, користите крпу лагано обришитеampened with water and a mild detergent, then wipe dry. Do not use abrasive cleaners or solvents.

Складиштење

When not in use for extended periods, remove the batteries to prevent leakage and store the instruments in a cool, dry place away from direct sunlight and extreme temperatures.

КСНУМКС. Решавање проблема

Но Повер

  • Проверите да ли су батерије правилно постављене и да ли су довољно напуњене. Замените их ако је потребно.
  • Ensure the rotary switch is not in the 'OFF' position.

Нетачна очитавања

  • Verify the correct measurement function and range are selected.
  • Ensure test leads are properly connected and not damaged.
  • Check for external interference or strong magnetic fields affecting the measurement.
  • За клamp meter, ensure only one conductor is enclosed within the jaws for current measurement.

Екран не ради

  • Check battery condition and replace if needed.
  • If the issue persists after checking batteries, contact customer support.

7. Спецификације

7.1 HIOKI IR4051-10 Digital Insulation Tester

ФеатуреСпецификација
Rated Measurement VoltageDC 50V / 125V / 250V / 500V / 1000V
Effective Max Display Value100 MΩ / 250 MΩ / 500 MΩ / 2000 MΩ / 4000 MΩ
Прецизност±4%рдг.
ДЦ Волtagе Мерење4.2V to 600V (4 ranges), Accuracy: ±1.3%rdg. ±4dgt.
АЦ Волtagе Мерење420V / 600V (2 ranges), 50/60 Hz, Accuracy: ±2.3%rdg. ±8dgt.
Low Resistance (Continuity)10 Ω to 1000 Ω (3 ranges), Basic Accuracy: ±3%rdg. ±2dgt.
Response Time (Comparator)Pribl. 0.8 sekundi
Дроп Прооф1 meter onto concrete
Повер СупплиAA alkaline batteries (LR6) x 4
Време непрекидног коришћења20 hours (under specified conditions)
Димензије159 W × 177 H × 53 D mm
Тежина600 g (including batteries, excluding test leads)
Укључена додатна опремаTest lead L9787, Neck strap, Instruction manual, AA batteries

7.2 HIOKI 3280-10F AC Clamp Метер

ФеатуреСпецификација
AC Measurement MethodAverage value method (MEAN)
Measurable Conductor Diameterφ33mm (Jaw thickness 9.5mm)
Мак Ратед Волtagе на ЗемљуClamp sensor: CAT IV 300V, CAT III 600V; Voltage terminals: CAT III 300V, CAT II 600V
АЦ Цуррент42.00A / 420.0A / 1000A (±1.5% rdg. ±5dgt)
АЦ Волtage4.200V to 600V (4 ranges), Accuracy: ±1.8% rdg. ±7dgt
ДЦ Волtage420.0mV to 600V (5 ranges), Accuracy: ±1.0% rdg. ±3dgt
Отпор420.0Ω to 42.00MΩ (6 ranges), Accuracy: ±2.0% rdg. ±4dgt
Провера континуитета420.0Ω (Accuracy: ±2.0% rdg. ±4dgt)
Радна температура/влажност-25℃ to 85℃, 80%RH or less (no condensation)
Дроп Прооф1 meter onto concrete
Отпоран на прашину/водоотпоранИП40
Повер СупплиCR2032 coin-type lithium battery x 1
Време непрекидног коришћењаПрибл. 120 сата
Димензије57 W × 175 H × 16 D mm
Тежина100 г
Укључена додатна опремаCarrying case 9398, Test lead L9208, Lithium battery CR2032, Instruction manual

8. Гаранција и подршка

Информације о гаранцији

  • HIOKI IR4051-10 Digital Insulation Tester: 1-year accuracy guarantee period.
  • HIOKI 3280-10F AC Clamp метар: 3-year product warranty period, with a 1-year accuracy guarantee period after adjustment.

Please retain your purchase receipt as proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

Корисничка подршка

For technical assistance, troubleshooting, or warranty service, please contact HIOKI customer support through their official website or authorized service centers. Refer to the contact information provided in the original product packaging or on the HIOKI official webсајту.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.