Kerbl Automatic Chicken Door Control Unit Instruction Manual

1. Увод

The Kerbl Automatic Chicken Door Control Unit (Model 70550) is designed to automate the opening and closing of chicken coop doors, flaps, or sliders. This system offers flexible control options including light-sensor based operation, time-based scheduling, and manual control, ensuring convenience and safety for your poultry.

Figure 1: The Kerbl Automatic Chicken Door Control Unit, showing its display and control buttons.

2. Безбедносне информације

• Always ensure the power supply is disconnected before performing any installation or maintenance.
• The unit is equipped with safety features: if the slider encounters resistance (e.g., an animal) during closing, the process will stop and resume after the obstruction is removed.
• A time delay for the light signal prevents unwanted opening due to lightning or brief changes in light conditions.
• The device automatically shuts off if the motor is overloaded.
• Keep the unit and its components out of reach of children and animals.

3. Садржај пакета

Молимо вас да проверите да ли су све следеће компоненте укључене у ваш пакет:

• Control unit with integrated motor and wiring
• 230 V mains adapter
• 4 к АА батерије
• Светлосни сензор
• 4 reversible pulleys
• Упутство за употребу

Figure 2: The product packaging, indicating included components and features.

4. Подешавање

Follow these steps to set up your automatic chicken door control unit:

1. Монтажа контролне јединице: Choose a suitable location on your chicken coop wall, protected from direct weather exposure if possible. Ensure it is positioned correctly relative to the door/slider.
2. Installing the Door/Slider: If not already installed, mount the chicken door or slider (available separately in two sizes) according to its own instructions. Ensure it moves freely.
3. Attaching Pulleys: Install the four reversible pulleys to guide the lifting string from the control unit to the chicken door. Position them to allow smooth, unobstructed movement of the string.


Figure 3: The control unit mounted on the side of a chicken coop, with pulleys guiding the string for the door.

4. Connecting the String: Thread the lifting string through the pulleys and attach it securely to the chicken door/slider. Ensure the string is taut but allows full range of motion for the door.

Figure 4: A complete setup showing the chicken coop, automatic door, and the Kerbl control unit installed.
5. Напајање: The unit can be powered by either the 230 V mains adapter or the 4 x AA batteries. You can also use both power sources in parallel to ensure operation during power outages. Connect the chosen power source to the control unit.
6. Постављање светлосног сензора: Position the light sensor in an area that accurately reflects the ambient light conditions for your desired opening/closing times. Avoid placing it in direct sunlight or constant shadow.

5. Упутство за употребу

The automatic chicken door offers multiple operating modes:

5.1. Light-Dependent Control

This mode uses the light sensor to automatically open the door at dawn and close it at dusk. A configurable time delay for the light signal prevents premature opening or closing due to sudden light changes (e.g., lightning).

5.2. Time-Dependent Control

You can program specific opening and closing times. This mode allows for different schedules on weekdays and weekends, providing flexibility for your flock's routine.

5.3. Ручна контрола

The door can be opened or closed manually directly on the unit via its buttons, or through an external button connected to the unit (if applicable).

5.4. Safety Features in Operation

• Детекција препрека: If the slider encounters resistance from an animal or other object during closing, the motor will stop. The process will then resume once the obstruction is cleared, preventing injury to animals.
• Заштита од преоптерећења мотора: The unit is designed to automatically shut off if the motor experiences an overload, protecting the device from damage.

6. Одржавање

To ensure optimal performance and longevity of your Kerbl Automatic Chicken Door Control Unit, regular maintenance is recommended:

• Чишћење: Periodically clean the control unit and the door/slider mechanism to remove dirt, dust, and debris that could impede operation. Use a soft, damp тканина. Немојте користити абразивна средства за чишћење.
• String and Pulley Inspection: Regularly check the lifting string for fraying or wear. Inspect the pulleys to ensure they rotate freely and are not obstructed. Replace worn components as necessary.


Слика 5: Крупни план view of the red reversible pulleys, essential for smooth door operation.

• Провера батерије: If using battery power, check the battery level periodically and replace all four AA batteries when indicated or when performance degrades.
• Door/Slider Movement: Ensure the chicken door/slider itself moves smoothly within its tracks without sticking or excessive friction. Lubricate tracks if necessary, using animal-safe lubricants.

КСНУМКС. Решавање проблема

If you encounter issues with your automatic chicken door, refer to the following common problems and solutions:

8. Спецификације

• Модел: 70550
• Бренд: Кербл
• Материјал: Пластика
• Макс. Капацитет подизања: Приближно 2.5 кг (5.5 лбс)
• Min. Lifting Capacity: 0.5 кг (1.1 лбс)
• Макс. Висина подизања: 600 мм (23.6 инча)
• Напајање: 230 V mains operation or 4 x AA batteries (can be used in parallel)
• Димензије производа: Approximately 20 x 20 x 20 cm (7.9 x 7.9 x 7.9 inches); 860 g (1.9 lbs)
• Боја: Зелена
• Препоручене врсте: All bird sizes

9. Гаранција и подршка

This Kerbl Automatic Chicken Door Control Unit comes with a трогодишња гаранција од дана куповине.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or Kerbl customer service. Please have your model number (70550) and proof of purchase ready when contacting support.