WORKPRO Pink Cordless 20V Lithium-ion Drill Driver Set Instruction Manual

1. Увод

This manual provides essential information for the safe operation, maintenance, and care of your WORKPRO Pink Cordless 20V Lithium-ion Drill Driver Set. Please read these instructions carefully before using the tool and retain them for future reference.

Слика 1.1: Готовоview of the WORKPRO Pink Cordless 20V Lithium-ion Drill Driver Set, including the drill, battery, charger, storage bag, and various drill and driver bits.

2. Општа безбедносна упутства

Увек се придржавајте основних мера безбедности како бисте смањили ризик од пожара, струјног удара и повреда приликом коришћења електричних алата.

• Безбедност на радном месту: Радно место одржавајте чистим и добро осветљеним. Неред или тамна места могу изазвати несреће. Немојте користити електричне алате у експлозивним атмосферама, као што је присуство запаљивих течности, гасова или прашине.
• електрична безбедност: Избегавајте контакт тела са уземљеним површинама као што су цеви, радијатори, шпорети и фрижидери. Не излажите електричне алате киши или влажним условима.
• Лична безбедност: Увек носите заштиту за очи. Користите заштиту за уши када радите дуже време. Обуците се прикладно; избегавајте широку одећу или накит. Обезбедите дугу косу.
• Употреба и одржавање алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Искључите утикач из извора напајања и/или извадите батерију из електричног алата пре него што извршите било каква подешавања, промените додатну опрему или складиштите електрични алат.
• Употреба и одржавање батеријског пакета: Пуните батерије само пуњачем који је навео произвођач. Не користите батерије са другим електричним алатима.

3. Компоненте и карактеристике производа

The WORKPRO Pink Cordless 20V Lithium-ion Drill Driver is designed for various drilling and driving tasks. Key components and features include:

• 20V мотор: Provides strong and steady power.
• 1.5Ah Lithium-ion Battery: Ensures endurable run time.
• Variable 2-Speed Settings: Offers speeds of 0-400 rpm and 0-1500 rpm for different applications.
• 21+1 Torque Adjustment: Delivers 203 in-Lbs (23 N.M) of max torque with precise adjustment.
• 3/8" (10mm) Keyless Chuck: Provides superior bit retention and easy bit changes.
• Мекана ручка: Enhances comfort and control during use.
• ЛЕД светло: Illuminates the work area for improved visibility in dark spaces.
• Forward/Reverse Rotation Control: Allows for easy switching between drilling/driving and removing screws.
• Копча на каишу: За удобно ношење.

Image 3.1: Labeled diagram illustrating the key components of the drill driver, including the torque adjustment ring, keyless chuck, two-speed gear control, forward/reverse control, LED light, on/off switch, magnetic base, battery pack release button, and belt clip.

4. Упутства за подешавање

4.1. Пуњење батерије

The battery pack is not fully charged upon purchase. It is recommended to fully charge the battery before first use. Use only the charger provided with your drill driver set.

1. Прикључите пуњач на стандардну електричну утичницу.
2. Insert the battery pack into the charger. Ensure it is seated correctly.
3. Allow the battery to charge until the indicator light on the charger signals a full charge (refer to charger instructions for specific light indications).
4. Када се батерија напуни, искључите пуњач из батерије и искључите утикач из утичнице.

4.2. Инсталирање и вађење батеријског пакета

• За инсталирање: Поравнајте батеријски пакет са основом дршке бушилице и увуците га док не кликне чврсто на своје место.
• За уклањање: Press the battery pack release button (located on the side of the battery pack) and slide the battery pack out.

4.3. Installing Drill/Driver Bits

The drill features a 3/8" (10mm) keyless chuck for easy bit changes.

1. Ensure the drill is off and the battery pack is removed for safety.
2. Grasp the rear half of the chuck and rotate the front half counter-clockwise until the chuck jaws are open wider than the bit you intend to insert.
3. Insert the drill bit or driver bit into the chuck jaws. Ensure the bit is centered and fully seated.
4. Rotate the front half of the chuck clockwise to tighten the jaws securely around the bit. Hand-tighten firmly.

Image 4.1: Visual guide demonstrating how to open and close the keyless chuck to insert or remove drill bits.

5. Упутство за употребу

5.1. On/Off Switch and Variable Speed Control

The trigger switch controls the drill's power and speed. Pressing the trigger initiates operation, and the speed is variable based on pressure applied.

• Да бисте укључили, притисните прекидач за окидање.
• To increase speed, apply more pressure to the trigger.
• Да бисте искључили, отпустите окидач.

5.2. Two-Speed Gear Control

The drill features a two-speed gear selector located on top of the tool.

• Position 1 (Low Speed, 0-400 RPM): Recommended for driving screws and applications requiring higher torque.
• Position 2 (High Speed, 0-1500 RPM): Препоручује се за бушење и примене које захтевају бржу ротацију.

Always ensure the drill is stopped before changing gear positions to prevent damage.

Image 5.1: Illustration of the two-speed transmission settings, indicating low speed (0-400 RPM) for screwdriving and high speed (0-1500 RPM) for drilling.

5.3. Прстен за подешавање обртног момента

The torque adjustment ring allows you to select the desired torque setting for driving screws, preventing over-tightening or stripping. The drill offers 21+1 torque settings.

• Rotate the ring to align the desired number with the indicator mark. Lower numbers are for smaller screws or softer materials; higher numbers are for larger screws or harder materials.
• The drill icon setting is for drilling applications, providing maximum torque.

Слика 5.2: Крупни план view of the 21+1 torque adjustment ring, showing the numbered settings and the drill icon for maximum torque.

5.4. Forward/Reverse Rotation Control

The forward/reverse lever is located above the trigger switch. It controls the direction of rotation.

• Push the lever to the left for forward rotation (drilling and driving screws).
• Push the lever to the right for reverse rotation (removing screws or jammed bits).
• When the lever is in the center position, the trigger is locked, preventing accidental startup.

5.5. ЛЕД радно светло

The integrated LED light activates when the trigger is pressed, illuminating the work surface for better visibility.

Image 5.3: The drill's LED light in operation, providing illumination in a dimly lit area.

5.6. Пријаве

This drill driver is suitable for various household tasks, including:

• Drilling holes in wood (up to 5/8" or 16mm) and metal (up to 7/32" or 6mm).
• Увртање и одвртање шрафова.
• Састављање намештаја.
• Hanging shelves and decorations.

Image 5.4: A user operating the drill driver to fasten a screw into a wooden surface.

Image 5.5: A user operating the drill driver to create a pilot hole in a wooden board.

6. Одржавање

Редовно одржавање обезбеђује оптималне перформансе и продужава век трајања вашег алата.

• Чишћење: Отворе за вентилацију држите чистим и без прашине. Користите меку,amp крпа за чишћење алата цasinг. Не користите јаке хемикалије или абразивна средства за чишћење.
• Угљене четке: This is a carbon brush drill. Sparks are normal during initial use and should decrease over time. If sparks become excessively large or persistent, it may indicate a malfunction or worn brushes, requiring professional inspection.
• Складиштење: Store the drill driver, battery, and charger in a cool, dry place, away from direct sunlight and moisture. Use the provided storage bag for protection.
• Одржавање батерије: Do not allow the battery to fully discharge. Recharge the battery regularly, even when not in use, to maintain its lifespan.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима на које можете наићи.

8. Спецификације

9. Гаранција и подршка

For warranty information, please refer to the documentation included with your purchase or visit the official WORKPRO website. If you encounter any issues or require technical assistance, please contact WORKPRO customer support.

Произвођач: Zhejiang Minglei Tools Industrial Co., Ltd.

УПЦ: 820909749172