Aokeo 1-Channel 48V Phantom Power Supply Instruction Manual

1. Увод

The Aokeo 1-Channel 48V Phantom Power Supply is designed to provide stable 48V phantom power to condenser microphones, facilitating sound signal transfer to a sound card or mixer. This compact unit is suitable for various audio recording and live sound applications.

This manual provides essential information for the proper setup, operation, and maintenance of your phantom power supply.

Figure 1: Aokeo 1-Channel 48V Phantom Power Supply with accessories.

2. Садржај пакета

• 1 x Aokeo 1-Channel 48V Phantom Power Supply
• 1 x Power Adapter (110V Input)
• 1 x XLR Audio Cable (3-pin male to female)

3. Карактеристике производа

• Provides reliable 48V phantom power for condenser microphones.
• Universal XLR input and output for broad compatibility with microphone and recording equipment.
• Compact and durable plastic housing.
• Equipped with an On/Off power switch and an LED indicator for operational status.
• Single channel unit with balanced mic inputs and outputs.

Figure 2: Function Panel Overview.

4. Упутства за подешавање

1. Повежите микрофон: Connect your condenser microphone to the XLR INPUT port on the phantom power supply using an XLR cable.
2. Повежите се са аудио уређајем: Connect the XLR OUTPUT port of the phantom power supply to your mixer, audio interface, or sound card using another XLR cable.
3. Повежите адаптер за напајање: Plug the provided AC18V power adapter into the power input jack on the phantom power supply. Then, plug the adapter into a standard 110V AC power outlet.
4. Укључено: Press the ON/OFF switch to the 'ON' position. The power indicator LED will illuminate, indicating that the unit is active and supplying 48V phantom power.

Слика 3: Дијаграм повезивања.

5. Упутство за употребу

Once properly connected and powered on, the Aokeo 48V Phantom Power Supply will provide the necessary voltage to your condenser microphone. No further adjustments are typically required on the unit itself.

• Уверите се да су све везе безбедне пре него што укључите јединицу.
• The blue LED indicator confirms that the phantom power is active.
• Adjust microphone gain and volume settings on your connected mixer or audio interface, not on the phantom power supply.

Figure 4: Phantom power supply in use with a microphone and laptop for recording.

Figure 5: Plug and play functionality for various recording scenarios.

6. Одржавање

To ensure the longevity and optimal performance of your Aokeo Phantom Power Supply, follow these maintenance guidelines:

• Чишћење: Use a soft, dry cloth to clean the exterior of the unit. Avoid using liquid cleaners or solvents.
• Складиштење: Чувајте уређај на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура када се не користи.
• Нега каблова: Handle XLR cables and the power adapter with care to prevent damage to connectors and wiring.
• вентилација: Ensure the unit has adequate ventilation to prevent overheating.

КСНУМКС. Решавање проблема

If you encounter issues with your phantom power supply, consider the following:

• Индикатор напајања без напајања: Ensure the power adapter is securely connected to both the unit and a working power outlet. Check the ON/OFF switch position.
• Нема звука/Слаб звук:
  • Verify all XLR cables are correctly and securely connected between the microphone, phantom power supply, and audio device.
  • Confirm the phantom power supply is turned ON (LED illuminated).
  • Adjust the gain/volume levels on your mixer or audio interface.
  • Напомена: The phantom power supply provides voltage; it does not amplify the microphone's sound quality or increase its normal volume.
• Humming/Noise: Ensure all cables are properly shielded and connections are tight. Try using different cables to rule out cable issues. Ensure the power supply is not placed too close to other electronic devices that may cause interference.

8. Спецификације

9. Гаранција и подршка

For warranty information or technical support, please refer to the documentation included with your purchase or contact Aokeo customer service directly. Contact details can typically be found on the manufacturer's official webсајту.