TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Увод

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Садржај пакета

Проверите да ли су све ставке наведене у наставку укључене у ваш пакет. Ако неке ставке недостају или су оштећене, обратите се продавцу.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Повер Адаптер
• УСБ миш
• Ремоте Цонтрол
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Водич за брзи почетак

Слика 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Безбедносне информације

Молимо вас да се придржавате следећих мера безбедности како бисте спречили повреде или оштећење уређаја:

• Уверите се да је напајање волtage is correct before connecting the NVR.
• Do not expose the NVR to water or moisture.
• Avoid placing the NVR in direct sunlight or near heat sources.
• Install the NVR in a well-ventilated area to prevent overheating.
• Do not open the NVR casinг. Сва сервисирања препустите квалификованом особљу.
• Користите само додатну опрему коју је одредио произвођач.

3. Производ је готовview

NVR Front and Rear Panels

Слика 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Front Panel Indicators and Controls:

• СНАГА: Индикатор напајања.
• СТАТУС: Индикатор статуса система.
• Предаја/Пријем: Data transmission/reception indicator.
• Контролна дугмад: For menu navigation and system control.
• УСБ порт: For mouse or USB storage device connection.

Интерфејси на задњој плочи:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• АУДИО ИН/ОУТ: За екстерне аудио уређаје.
• ЛАН порт: Connect to your network router/switch.
• ХДМИ излаз: Connect to a monitor for high-resolution video output (up to 4K).
• ВГА излаз: Connect to a monitor for video output (up to 1080p).
• Power Input (48V): Прикључите приложени адаптер за напајање.
• Прекидач: To turn the NVR on/off.

Кључне карактеристике

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Подршка уживо view, storage, and playback of connected cameras.

4. Подешавање

4.1 Инсталација чврстог диска (опционо)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. Одврните и уклоните горњи поклопац НВР-а.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Причврстите чврсти диск на кућиште NVR-а помоћу приложених вијака.
4. Вратите горњи поклопац и причврстите га завртњима.

4.2 Connecting Cameras

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Слика 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Повежите монитор на HDMI или VGA излазни порт NVR-а.
• Повежите УСБ миш на један од УСБ портова НВР-а.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewинг способности.

4.4 Укључивање

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Упутство за употребу

5.1 Чаробњак за почетно подешавање

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Уживо View

Након почетног подешавања, NVR ће приказивати уживо view повезаних камера. Можете пребацивати између режима једне камере view и мрежа са више камера view using the on-screen controls or the remote control.

5.3 Снимање

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Репродукција

Приступ снимљен фооtage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Приступ мрежи и даљински управљање Viewинг

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Одржавање

6.1 Управљање чврстим диском

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Ажурирања фирмвера

Проверите произвођача website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Чишћење

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

КСНУМКС. Решавање проблема

• Нема напајања:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Нема видео излаза:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Камере се не приказују:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Нема снимања:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Проблеми са даљинским приступом:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web подешавања претраживача.

8. Спецификације

9. Гаранција и подршка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL webсајт. Сачувајте рачун као доказ о куповини за потребе гаранције.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.