Elitech LogEt 8 BLE Bluetooth Wireless Data Logger User Manual

1. Производ је готовview

The Elitech LogEt 8 BLE is a Bluetooth wireless multi-use PDF data logger designed for monitoring temperature in various life science applications. It features a USB port for direct data download and PDF report generation, and Bluetooth connectivity for remote management via the Elitech App.

Кључне карактеристике:

• Бежична Блуетоотх технологија: Enables one-click pairing and remote programming/management via the Elitech App within meters.
• Wide Temperature Measuring Range: -22℉ to 158℉ (-30℃ to 70℃) with an accuracy of ±0.9℉ (±0.5℃).
• Компатибилност мобилних апликација: Free Elitech App for iOS and Android devices facilitates remote logger management and cold chain monitoring.
• Multi-use Capability: Designed for repeated use over approximately 2 years under room temperature conditions.
• Аутоматска синхронизација података: Automatically uploads all recorded data to your account when connected to the Elitech APP.
• High Recording Capacity: Stores up to 16,000 recording points.

Слика 1: Предња страна view of the LogEt 8 BLE data logger with labeled components.

2. Садржај пакета

Verify that all items are present in the package upon unboxing:

• 1 x LogEt 8 BLE Data Logger
• 1 к Упутство за употребу
• 1 к Сертификат о калибрацији

Figure 2: Contents included in the LogEt 8 BLE package.

3. Компоненте уређаја

Familiarize yourself with the main components of the LogEt 8 BLE data logger:

• УСБ порт: Located at the top, protected by a removable cap. Used for direct connection to a computer for data download and configuration.
• ЛЦД екран: Displays current temperature, alarm status, recording status, and battery level.
• Старт дугме: Покреће снимање података.
• Дугме СТОП: Halts data recording.
• Embedded Temperature Sensor: Internal sensor for accurate temperature measurement.

4. Подешавање

4.1 Почетно подешавање

1. Распакујте уређај: Carefully remove the LogEt 8 BLE from its packaging.
2. Прегледајте има ли оштећења: Check the device for any visible damage. If damaged, contact customer support.
3. Активација батерије: The device comes with a pre-installed lithium metal battery. No initial activation is typically required.

4.2 Software Installation (Elitech App)

To fully utilize the LogEt 8 BLE's features, download the Elitech App on your mobile device:

• Тражи "Elitech" in the Apple App Store (for iOS) or Google Play Store (for Android).
• Download and install the official Elitech App.
• Направите налог или се пријавите ако га већ имате.

4.3 Повезивање преко Блуетоотх-а

Once the app is installed:

1. Уверите се да је Блуетоотх омогућен на вашем мобилном уређају.
2. Open the Elitech App.
3. The app will scan for nearby Elitech data loggers. Select your LogEt 8 BLE from the list to pair.
4. Follow any on-screen prompts for one-click pairing.

4.4 Programming the Logger

Before starting a recording, configure the logger's parameters using the Elitech App or by connecting directly to a computer via USB:

• Via Elitech App: Within the app, navigate to the settings for your connected LogEt 8 BLE. You can set parameters such as sampling interval, alarm thresholds, start delay, and recording duration.
• Via USB (PC Software): Remove the protective cap to expose the USB port. Connect the logger to a computer. Use the Elitech data management software (downloadable from the Elitech website) to configure settings.

Figure 3: Default parameters sticker on the side of the device.

5. Упутство за употребу

5.1 Покретање снимања

To begin data logging:

• Притисните и држите СТАРТ button for approximately 3 seconds until the "REC" indicator appears on the LCD screen.
• If a start delay was configured, the logger will begin recording after the specified delay.

5.2 Заустављање снимања

To end data logging:

• Притисните и држите СТОП button for approximately 3 seconds until the "END" indicator appears on the LCD screen.
• Alternatively, connect the logger to the Elitech App or PC software and select the option to stop recording.

5.3 Преузимање података и генерисање извештаја

After recording, data can be retrieved and analyzed:

• Преко УСБ-а: Remove the USB cap and plug the logger into a computer's USB port. The logger will automatically generate a PDF report and a CSV data file. Ове files can be accessed directly from the logger's virtual drive.
• Via Elitech App: Connect the logger to the Elitech App via Bluetooth. The app will automatically sync and upload all data to your account. You can then view graphs, export data, or generate reports directly from the app.

Figure 4: LogEt 8 BLE with USB port exposed and key specifications.

6. Одржавање

6.1 Информације о батерији

The LogEt 8 BLE is powered by a non-rechargeable lithium metal battery. The battery is designed to last for approximately 2 years under normal operating conditions. The battery is contained within the equipment and is not user-serviceable. Attempting to replace the battery may damage the device and void the warranty.

6.2 Чишћење

Да бисте очистили уређај:

• Обришите спољашњост меком, сувом крпом.
• Не користите абразивна средства за чишћење, раствараче или потапајте уређај у воду.

6.3 Складиштење

When not in use, store the data logger in a cool, dry place, away from direct sunlight and extreme temperatures.

КСНУМКС. Решавање проблема

If you encounter issues with your LogEt 8 BLE, refer to the following common problems and solutions:

• Уређај се не укључује: Check battery level on the LCD. If the battery is depleted, the device may need replacement as the battery is not user-serviceable.
• Није могуће повезати се преко Bluetooth-а: Ensure Bluetooth is enabled on your mobile device and the Elitech App is open. Make sure the logger is within range. Restart both the logger and your mobile device.
• No data recorded: Verify that recording was properly started (check for "REC" on LCD). Ensure the logger's memory is not full.
• PDF report not generated: Ensure the logger is connected to a computer's USB port correctly. Try a different USB port or computer. Ensure the USB cap is fully removed.
• Нетачна очитавања: Ensure the logger's sensor is not obstructed and is placed in an environment suitable for its operating range.

For further assistance, contact Elitech customer support.

8. Спецификације

9. Гаранција и подршка

9.1 Информације о гаранцији

Elitech products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included in your package or visit the official Elitech website for specific warranty terms and conditions applicable to the LogEt 8 BLE.

9.2 Корисничка подршка

For technical support, troubleshooting assistance, or warranty claims, please contact Elitech customer service:

• Webсајт: Посетите ввв.елитецхус.цом for FAQs, software downloads, and contact information.
• Имејл/Телефон: Refer to the Elitech webсајт или паковање вашег производа за најновије контакт податке.