1. Увод
This manual provides essential information for the safe and efficient operation of your Behringer NX6000D Power Amplifier. Please read it thoroughly before use and retain it for future reference. The NX6000D is a high-performance, ultra-lightweight 6000-Watt Class-D power amplifier with integrated DSP and 24-bit/96 kHz converters, designed for professional audio applications.
2. Важна безбедносна упутства
- Извор напајања: Connect the unit only to an AC power outlet of the correct voltage as specified on the rear panel.
- вентилација: Обезбедите одговарајућу вентилацију. Не блокирајте вентилационе отворе.
- Вода и влага: Do not expose this appliance to rain or moisture. Do not place objects filled with liquids on the apparatus.
- Сервисирање: Сва сервисирања препустите квалификованом сервисном особљу. Не покушавајте сами да сервисирате овај производ.
- Каблови: Use only high-quality, shielded cables for all audio connections to prevent interference.
- уземљење: Овај производ мора бити уземљен.
- Чишћење: Чистите само сувом крпом.
3. Водич за подешавање
3.1 Распакивање и преглед
Пажљиво распакујте amplifier and inspect it for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 Постављање
The NX6000D is designed for rack mounting. Ensure sufficient space around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.
3.3 Везе
- Прикључак за напајање: Connect the supplied AC power cord to the amplifier's power inlet and then to a suitable grounded power outlet.
- Улазне везе: Use balanced XLR or 1/4" TRS cables to connect your audio source (mixer, preamplifier) to the INPUT A and INPUT B jacks on the rear panel.
- Излазне везе: Connect your loudspeakers to the SPEAKON output connectors (OUTPUT A and OUTPUT B) on the rear panel. Ensure correct polarity and impedance matching. The amplifier supports 4-ohm and 8-ohm loads.
Figure 1: Front panel of the Behringer NX6000D Power Amplifier, showing controls and display.
Слика 2: Под углом view of the Behringer NX6000D Power Ampспасивач, истичући његов компактан дизајн.
4. Упутство за употребу
4.1 Укључивање/искључивање
Press the POWER button on the front panel to turn the unit on. The display will illuminate. To power off, press the POWER button again.
4.2 Контроле на предњој плочи
- Level Controls (CH A, CH B): Подесите ниво излазног звука за сваки канал.
- SIGNAL/LIMIT/PROTECT LEDs: Indicate signal presence, limiting activity, and protection mode.
- ЛЦД екран: Shows current settings, DSP parameters, and status.
- Дугме СЕТУП: Accesses the main setup menu.
- PROCESS Button: Accesses DSP processing parameters.
- Дугме енкодера: Navigates menus and adjusts parameter values.
- Дугме ЕКСИТ: Returns to the previous menu or main screen.
4.3 DSP Functionality
The integrated DSP allows for advanced audio processing. Press the PROCESS button to enter the DSP menu. Here you can configure:
- кашњење: Adjust signal delay for speaker alignment.
- Цроссовер: Set crossover frequencies and filter types (e.g., Butterworth, Linkwitz-Riley, Bessel) up to 48 dB/octave.
- ЕК: Utilize 8 parametric and 2 dynamic equalizer bands for precise frequency shaping.
- Dynamics Processing: Apply compression or limiting to control dynamic range.
- Сигурносна подешавања: Lock settings to prevent unauthorized changes.
Use the Encoder Knob to navigate and adjust parameters. Press the Encoder Knob to confirm selections. Refer to the full digital manual (available on the Behringer website) for detailed DSP operation.
5. Одржавање
- Чишћење: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- вентилација: Regularly check that the ventilation openings are clear of dust and debris.
- Кабловске везе: Periodically check all cable connections for secure fit and signs of wear.
- Складиштење: If storing the unit for an extended period, ensure it is in a dry, dust-free environment.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема струје | Power cord disconnected; faulty outlet; internal fuse. | Check power cord connection; try a different outlet; contact service if fuse is suspected. |
| Нема излаза звука | Input/output cables incorrect; level controls too low; protection mode active. | Verify all cable connections; increase level controls; check PROTECT LED (if lit, power cycle unit). |
| Изобличен звук | Input signal too high; speaker impedance mismatch; faulty speaker. | Reduce input signal level; verify speaker impedance matches ampживотник; тестирајте са различитим звучницима. |
| Јединица се прегрева | Блокирана вентилација; прекомерно оптерећење. | Ensure clear airflow around the unit; reduce output level or load. |
7. Техничке спецификације
- Излазна снага: 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms
- Тежина: Less than 13.2 lbs / 6.0 kg
- Димензије (В к Ш к Д): Приближно 3.7 к 19.02 к 12.44 инча (94 к 483 к 316 мм)
- ДСП: High-performance DSP with 24-bit/96 kHz converters
- ДСП карактеристике: Delay, Crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), Dynamics Processing
- Улазни конектори: 2 x XLR/TRS combo jacks
- Излазни конектори: 2 x SpeakON connectors
- Напајање: Ultra-efficient switch-mode power supply
- Хлађење: Revolutionary cool-running high-density Class-D technology
- Материјал: Метал
- Боја: Црно
8. Гаранција и подршка
For detailed warranty information, please refer to the Behringer warranty program available on their official website. Behringer products are typically covered by a limited warranty against defects in materials and workmanship.
8.1 Техничка подршка
If you encounter issues not covered in the troubleshooting section or require further assistance, please visit the official Behringer support website or contact their customer service. You may need your product's serial number for support inquiries.
Behringer Official Webсајт: ввв.бехрингер.цом