Fluance RT85 Turntable User Manual

Увод

The Fluance RT85 Turntable is designed to deliver a pure analog listening experience with exceptional musical accuracy. Featuring an Ortofon 2M Blue elliptical cartridge, a high-density acrylic platter, and precise speed control, this turntable ensures high-fidelity audio reproduction. Its high-mass MDF wood plinth and vibration isolation feet provide superior stability and sound clarity.

Image: Fluance RT85 Turntable in Piano Black, showcasing its elegant design and high-quality components.

Шта је укључено

Your Fluance RT85 Turntable package includes the following components:

• Plinth (Turntable Base)
• Акрилни тањир
• Руббер Белт
• Headshell & Ortofon 2M Blue Cartridge
• Dust Cover & 2 Hinges
• 3ft Ground Cable
• 3ft RCA Cables
• Cotton Gloves (for handling components)
• Поклопац ременице мотора
• 45 Адаптер
• Противтежа
• Буббле Левел
• 5ft Power Adapter
• Кориснички приручник (овај документ)

Image: A visual representation of all items included in the Fluance RT85 Turntable package.

Сетуп

Follow these steps to set up your Fluance RT85 Turntable for optimal performance.

1. Распакивање и почетно постављање

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and vibrations.

2. Постављање плоче и каиша

1. Place the acrylic platter onto the spindle in the center of the turntable.
2. Place the motor pulley cap over the motor pulley. Ensure it locks into place.
3. Lift the rubber belt, which is pre-installed around the platter, and carefully place it around the motor pulley.
4. Rotate the platter a few times clockwise to ensure the belt is properly seated.

Слика: Одозго надоле view of the Fluance RT85 turntable with the acrylic platter and drive belt in place.

3. Counterweight and Headshell Installation

1. Ensure the tonearm is locked in its rest.
2. Slide the counterweight onto the end of the tonearm with the numbers facing forward.
3. Install the headshell (with the Ortofon 2M Blue Cartridge pre-attached) onto the tonearm and tighten the locking nut until it is secure.

Слика: Детаљна view of the Ortofon 2M Blue elliptical cartridge, highlighting its precision.

4. Нивелисање грамофона

Use the included bubble level to ensure the turntable is perfectly level. Adjust the turntable's adjustable feet as needed until the bubble is centered.

Image: The high-mass MDF wood plinth and adjustable sound isolation feet of the Fluance RT85.

5. Balancing the Tonearm and Setting Tracking Force

1. Уклоните заштитник игле.
2. Unlock the tonearm, lift the cueing lever, and position the tonearm over the platter.
3. Hold the headshell and gently lower the cueing lever completely. Do not let the stylus touch the platter.
4. Turn the counterweight until the tonearm is balanced and floats horizontally when released.
5. Move only the counterweight indicator ring to zero (without turning the entire counterweight).
6. Rotate the entire counterweight until the ring is set to the recommended tracking force for the Ortofon 2M Blue cartridge, which is 1.8 грама.
7. Adjust the anti-skating dial to the same number as the tracking force (1.8).

6. Уградња поклопца за прашину

Attach the hinges to the dust cover, then carefully install the dust cover onto the turntable.

7. Повезивање са Ampдизалица/пријемник

The Fluance RT85 does not have a built-in phono preamp. You will need an external phono preamp или ан amplifier/receiver with a dedicated phono input.

• Connect the RCA cables from the turntable's audio output to the phono input on your receiver/preamp.
• Connect the ground wire from the turntable to the grounding post on your receiver/preamp to minimize hum.

For a visual guide on setup, please watch the official Fluance setup video:

Упутство за употребу

Once your turntable is set up, follow these steps to play your vinyl records.

1. Place a record on the acrylic platter.
2. Select the desired speed (33 1/3 RPM or 45 RPM) using the speed selector knob. For 45 RPM records, place the 45 adapter on the spindle if the record has a large center hole.
3. Пажљиво подигните ручицу грамофона помоћу полуге за подешавање звука.
4. Поставите ручицу грамофона преко жељеног почетног жлеба плоче.
5. Slowly lower the cueing lever to allow the stylus to gently descend onto the record.
6. At the end of the record, the auto-stop feature will stop the platter rotation. Lift the tonearm and return it to its rest.

За крајview of the Fluance Reference Series turntables, watch this video:

Одржавање

Proper maintenance will ensure the longevity and optimal performance of your turntable.

• Поклопац за прашину: Држите поклопац за прашину затворен када се не користи како бисте заштитили грамофон од прашине и прљавштине. Чистите меком, сувом крпом.
• Оловка: Нежно редовно чистите оловку меком четкицом намењеном за чишћење оловке, четкајући од позади ка напред.
• Platter and Plinth: Wipe the acrylic platter and MDF wood plinth with a soft, lint-free cloth. Avoid abrasive cleaners.
• појас: Inspect the drive belt periodically for wear or stretching. Replace if necessary.

Решавање проблема

Ако наиђете на било какве проблеме, погледајте следеће уобичајене савете за решавање проблема:

Спецификације

• Модел: РТ85Т
• Бренд: Флуанце
• Димензије производа: 13.75 к 16.5 к 5.5 инча
• Тежина артикла: 16.76 фунти
• Материјал: МДФ дрво
• тањир: High Density Acrylic
• кертриџ: Ortofon 2M Blue elliptical cartridge
• Тип мотора: AC Motor with Speed Control Mechanism
• Wow/Flutter: 0.07%
• Технологија повезивања: Виред
• Земља порекла: Тајван

Image: Key dimensions of the Fluance RT85 Turntable.

Гаранција и подршка

Fluance offers a 2-year manufacturer's direct warranty and lifetime customer support for your RT85 Turntable.

For additional support, FAQs, and international manuals, please visit the official Fluance support page:

Fluance Support Page

Image: QR code and text indicating support resources for Fluance products.