Compustar 1WG9R-SP

Compustar 1WG9R-SP 1-Way Replacement Remote Instruction Manual

Model: 1WG9R-SP | Brand: Compustar

1. Увод

This manual provides essential instructions for the proper setup, operation, and maintenance of your Compustar 1WG9R-SP 1-Way Replacement Remote. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

2. Производ је готовview

The Compustar 1WG9R-SP is a genuine 1-way replacement remote designed for use with compatible Compustar vehicle remote start systems. While it may work with certain two-way systems, it will only provide 1-way functionality. This remote features a durable black casing and three control buttons for various functions.

Compustar 1WG9R-SP 1-Way Replacement Remote

Figure 1: Compustar 1WG9R-SP 1-Way Replacement Remote. This image shows the front of the remote with its three buttons and Compustar branding.

Кључне карактеристике:

  • Genuine Compustar replacement part.
  • 1-way communication for basic remote functions.
  • Ергономски дизајн за удобно руковање.
  • Includes programming instructions for easy setup.

3. Setup: Programming Instructions

This section outlines the general steps for programming your new Compustar 1WG9R-SP remote to your vehicle's system. Specific steps may vary slightly depending on your vehicle and installed Compustar system. It is recommended to consult your vehicle's owner's manual or a professional installer if you encounter difficulties.

  1. Locate the Valet Switch: Identify the Valet switch in your vehicle. This is typically a small button located near the steering column, under the dash, or in the fuse box area.
  2. Уђите у режим програмирања:
    • Окрените кључ за паљење на ON position (do not start the engine).
    • Within 5 seconds, press and release the Valet switch five (5) times.
    • The vehicle's parking lights will flash once, indicating the system is in programming mode.
  3. Program the Remote:
    • While the system is in programming mode, press and hold the ЛОЦК button on your new 1WG9R-SP remote for approximately 2 seconds.
    • Release the button. The vehicle's parking lights will flash once to confirm the remote has been programmed.
  4. Изађите из режима програмирања:
    • Окрените кључ за паљење на ОФФ положај.
    • Alternatively, the system will automatically exit programming mode after 10-15 seconds of inactivity.
  5. Тестирајте даљински: After exiting programming mode, test all functions of your new remote to ensure it operates correctly.

Напомена: If you are programming multiple remotes, repeat step 3 for each additional remote while the system remains in programming mode. The system can typically store up to 4 remotes.

4. Упутство за употребу

The Compustar 1WG9R-SP remote features three primary buttons for controlling your vehicle's remote start system. The exact functions may vary based on your system's configuration.

  • Дугме за закључавање (I):
    • Press once to lock the vehicle doors.
    • Press and hold for 2 seconds to remote start the vehicle (if configured).
  • Дугме за откључавање (II):
    • Press once to unlock the vehicle doors.
    • Press and hold for 2 seconds to remote stop the vehicle (if configured).
  • Auxiliary/Trunk Button (ИИИ):
    • Press once to activate an auxiliary function (e.g., trunk release, power sliding door). Functionality depends on system installation.

Важно: Ensure you are within range of your vehicle for the remote commands to be received.

5. Одржавање

Замена батерије

The 1WG9R-SP remote uses two Lithium Metal batteries. When the remote's range decreases significantly or it stops responding, it's likely time to replace the batteries.

  1. Open the Remote Casing: Carefully pry open the remote casing using a small flat-head screwdriver or a plastic prying tool. Look for a small notch on the side of the remote.
  2. Уклоните старе батерије: Note the orientation of the existing batteries. Gently remove the old batteries from their compartment.
  3. Уметните нове батерије: Insert two new Lithium Metal batteries, ensuring they are placed with the correct polarity (+/-) as indicated inside the battery compartment.
  4. Затворите Цasing: Carefully snap the remote casing back together, ensuring it is securely closed.
  5. Тест функционалност: Test the remote's functions to confirm proper operation.

Опрез: Dispose of old batteries responsibly according to local regulations. Do not expose batteries to excessive heat or open flame.

КСНУМКС. Решавање проблема

If you experience issues with your Compustar 1WG9R-SP remote, refer to the following common problems and solutions:

ПроблемМогући узрокРешење
Даљински управљач не реагује.Dead or low batteries. Remote out of range. Not programmed correctly.Replace batteries. Move closer to the vehicle. Re-program the remote (refer to Section 3).
Смањен радни домет.Слабе батерије. Сметње из околине.Replace batteries. Avoid areas with high radio frequency interference.
Vehicle does not remote start.Vehicle not in park/neutral. Hood open. Brake pedal pressed. System error.Ensure all safety conditions are met. Check vehicle dashboard for warnings. Consult a professional installer.

7. Спецификације

ФеатуреДетаљ
БрандCompustar
Назив модела1WG9R-SP
Тип контролераКонтрола дугмета
Број дугмади3
Технологија повезивањаИнфрацрвени
Компатибилни уређајиVehicle Remote Start System
Максимални број подржаних уређаја1 (per programming slot)
Тип батеријеЛитхиум Метал
Број батерија2 (укључено)
БојаЦрно
Посебне карактеристикеЕргономски
УПЦ / ГТИН707568975831

8. Гаранција и подршка

Specific warranty information for the Compustar 1WG9R-SP remote is not provided within this manual. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your original Compustar system or visit the official Compustar webсајту.

For technical support, troubleshooting beyond this guide, or to locate an authorized Compustar dealer for professional assistance, please contact Compustar customer service or visit their official support channels.

Одрицање од одговорности: Compustar is not responsible for damages or malfunctions caused by improper installation, unauthorized modifications, or misuse of the product.

© 2023 Compustar. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.