Увод
This manual provides essential instructions for the safe and effective use of the GÜDE 55369 GHF 800 Manual Tile Cutter. Please read these instructions carefully before assembly, operation, or maintenance. Keep this manual for future reference.
Безбедносна упутства
Always prioritize safety when operating any tools. Failure to follow these instructions may result in injury or damage to the tool.
- Носите одговарајућу личну заштитну опрему (ЛЗО), укључујући заштитне наочаре и рукавице.
- Ensure the work surface is stable, level, and clean.
- Држите децу и пролазнике даље од радног подручја.
- Inspect the tile cutter for any damage before each use. Do not use if damaged.
- Handle tiles carefully; edges can be sharp after cutting.
- Do not force the cutting wheel. Apply steady, even pressure.
- Ensure the tile is properly secured on the anti-slip support before cutting.
Цомпонентс Оверview
Familiarize yourself with the parts of your GÜDE GHF 800 Manual Tile Cutter.
- Cutting Handle: Ергономски дизајниран за удобан рад.
- Резни точак: Hardened tungsten carbide wheel for precise scoring.
- Guide Rail: Provides a stable path for the cutting head.
- Основна плоча: Stable aluminum base for secure tile placement.
- Anti-slip Support: Ensures the tile remains stationary during cutting.
- Adjustable Stop/Angle Guide: For precise measurement and angled cuts.
- Fold-out Tile Supports: Extendable supports on both sides for larger tiles.
Сетуп
Before using the tile cutter, ensure it is properly set up.
- Распакивање: Carefully remove all components from the packaging. Check for any shipping damage.
- Пласман: Place the tile cutter on a stable, flat, and clean work surface. Ensure there is enough space around the cutter for safe operation and tile handling.
- Extend Tile Supports: For larger tiles, unfold the side tile supports (30 cm each) to provide additional stability.
Слика 2: Fold-out tile support. This image shows one of the side supports extended, providing additional surface area for larger tiles. - Adjustable Stop: Position the adjustable stop according to the desired tile dimension. Secure it firmly.
Слика 3: Tile placement and adjustable stop. This image illustrates a tile positioned on the cutter, with the adjustable stop set for a precise cut, indicating a maximum tile size of 80x80 cm.
Операција
Follow these steps for effective and safe tile cutting.
- Припремите плочицу: Clean the tile surface. Mark the desired cut line clearly with a pencil or marker.
- Поставите плочицу: Place the tile on the base plate, aligning the marked cut line with the cutting wheel's path. Ensure the tile rests firmly against the anti-slip support and the adjustable stop.
Слика 4: Tile positioning for a straight cut. This image shows a tile correctly placed on the cutter, ready for the scoring process. - Оцени плочицу:
- Position the cutting wheel at the edge of the tile furthest from you.
- Apply firm, consistent downward pressure on the cutting handle.
- Push the cutting handle smoothly and steadily across the tile towards you in a single, continuous motion. Do not make multiple passes. A distinct scoring sound should be heard.
Слика 5: Scoring the tile. This image focuses on the cutting wheel as it scores a line across the tile surface. - Разбиј плочицу:
- Once the tile is scored, position the breaking foot (part of the cutting head) directly over the scored line, near the edge of the tile closest to you.
- Apply quick, firm downward pressure on the cutting handle. The tile should snap cleanly along the scored line.
- For diagonal cuts, use the angle guide and ensure the tile is securely placed.
Слика 6: Performing a diagonal cut. This image demonstrates the tile cutter being used to make an angled cut on a tile. - Завршна обрада: Carefully remove the cut tile pieces. Edges may be sharp and may require light sanding or filing for a smooth finish.
Одржавање
Regular maintenance ensures the longevity and performance of your tile cutter.
- Чишћење: After each use, clean the base plate, guide rails, and cutting head to remove tile dust and debris. Use a dry cloth or brush.
- подмазивање: Periodically apply a light lubricant to the guide rails and the cutting wheel axle to ensure smooth operation.
- Резни точак: The tungsten carbide cutting wheel is durable but will eventually wear out. Replace the cutting wheel when cuts become inconsistent or require excessive force.
Слика 7: Hardened cutting wheel and ergonomic handle. This image provides a detailed view of the durable cutting wheel and the comfortable grip of the handle. - Складиштење: Store the tile cutter in a dry, clean place, away from direct sunlight and extreme temperatures.
Решавање проблема
Погледајте овај одељак за уобичајене проблеме и њихова решења.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Неравни или назубљени резови |
|
|
| Плочица се не ломи чисто |
|
|
| Cutting head sticks or moves roughly |
|
|
Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | 55369 |
| Максимална дужина сечења | 800 мм (80 цм) |
| Maximum Tile Dimensions | 800 x 800 mm (for diagonal cuts) |
| Maximum Tile Thickness | 12 мм |
| Пречник точка за сечење | 22 мм |
| Cutting Wheel Material | Тунгстен Царбиде |
| Материјал основне плоче | Алуминијум |
| Димензије производа (Д к Ш к В) | 105.4 к 86 к 39 цм |
| Тежина артикла | 7.4 килограма |
| Материјал ручке | полипропилен |
| Препоручена површина | Ceramic, Porcelain |
| Извор напајања | Ханд-поверед |
Гаранција и подршка
За информације о гаранцији или техничку подршку, обратите се званичном сервису произвођача webсајт или директно контактирајте њихову корисничку службу. Сачувајте рачун као доказ о куповини.
Manufacturer: GÜDE GmbH & Co.KG
Contact information can typically be found on the product packaging or the official GÜDE webсајту.