STANLEY FATMAX FMHT77586-1 Ласерски нивелир са зеленим зраком и укрштеним линијама - упутство за употребу

1. Увод

Thank you for choosing the STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level. This precision instrument is designed to project bright, clear green laser lines for various leveling and alignment tasks. This manual provides essential information for safe operation, proper setup, and effective use of your laser level. Please read it thoroughly before first use and keep it for future reference.

2. Безбедносне информације

УПОЗОРЕЊЕ: This is a Class 2 laser product. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at other people or reflective surfaces.

• Always operate the laser level in a safe manner, following all instructions in this manual.
• Do not attempt to modify or disassemble the laser level. This can cause serious injury and will void the warranty.
• Keep the laser level out of reach of children and untrained personnel.
• Ensure the work area is free from obstructions and potential hazards.
• Use only the specified battery type (AA alkaline batteries) and ensure correct polarity.
• Извадите батерије ако уређај неће бити коришћен дуже време како бисте спречили цурење.
• Protect the device from extreme temperatures, moisture, and direct sunlight.

3. Садржај пакета

Приликом распакивања, молимо вас да проверите да ли су све доле наведене ставке присутне и да нису оштећене:

• STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level
• Мека торбица за ношење
• L-Bracket (Magnetic Mounting Bracket)
• 4 к АА алкалне батерије
• Laser Target Plate (if included, often a small white plate)
• Кориснички приручник (овај документ)

Слика 1: Contents of the STANLEY FATMAX FMHT77586-1 package, including the laser level, carrying pouch, L-bracket, and batteries.

4. Производ је готовview

The STANLEY FATMAX FMHT77586-1 is a robust and accurate cross line laser level designed for professional and DIY applications. Key features include:

• Green Laser Diode: Utilizes a 510-530 Nm Class 2 green laser for enhanced visibility.
• Wide Cross Line Projection: Projects a 150° wide cross line, offering extensive surface coverage.
• Self-Leveling System: Automatically levels within a 4° range in approximately 5 seconds.
• Брава клатна: Secures the pendulum during transport to prevent damage and allows for manual mode operation for angled lines.
• Магнетна база: Features a magnetic base for direct attachment to metal structures.
• Режим пријемника: A dedicated button activates receiver mode, extending the working range up to 50 meters with an optional laser receiver.
• Издржљива конструкција: Rubber-coated housing provides IP54 protection against dust and splashing water.
• Опције монтаже: Equipped with 1/4" and 5/8" tripod threads for versatile mounting.

Слика 2: Сиде проfile of the laser level, showcasinг његов издржљив дизајн.

5. Подешавање

5.1 Инсталација батерије

1. Locate the battery compartment cover on the back or bottom of the laser level.
2. Отворите поклопац померањем или откључавањем.
3. Insert 4 AA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Добро затворите поклопац одељка за батерије.

5.2 Монтирање ласерског либела

The FMHT77586-1 offers several mounting options:

• Равна површина: Place the laser level directly on a stable, flat surface.
• Монтажа статива: Attach the laser level to a tripod using the 1/4" or 5/8" thread on the bottom of the unit.
• Магнетна монтажа: Use the included L-bracket to attach the laser level to metal surfaces. The L-bracket has strong magnets for secure attachment.

Слика 3: Laser level mounted using an L-bracket, projecting a horizontal line for alignment.

6. Упутство за употребу

6.1 Powering On and Self-Leveling Mode

1. Unlock the pendulum by sliding the lock switch to the unlocked position.
2. Press the power button (usually marked with a power symbol) to turn on the laser level.
3. The laser level will automatically begin self-leveling. This typically takes about 5 seconds.
4. Once leveled, the laser lines will emit a steady green light. If the device is outside its 4° self-leveling range, the laser lines may flash or an indicator light may illuminate, signaling that the device needs to be repositioned.

6.2 Switching Laser Modes

Press the mode button (often marked with a laser symbol or 'M') to cycle through different laser line configurations:

• Horizontal Line Only
• Vertical Line Only
• Cross Line (Horizontal and Vertical)

Слика 4: Interacting with the control panel to select laser modes.

6.3 Ручни режим (закључано клатно)

To project angled lines, keep the pendulum locked. When the pendulum is locked, the self-leveling function is deactivated, and the laser lines can be projected at any angle. The laser lines may flash to indicate that it is in manual mode and not self-leveling.

6.4 Режим пријемника

For outdoor use or in bright conditions, activate receiver mode by pressing the dedicated receiver button (often marked with a signal icon). This increases the pulse rate of the laser, allowing it to be detected by an optional laser receiver for extended range (up to 50m). An indicator light will typically confirm receiver mode is active.

Слика 5: Laser level in operation, projecting precise green cross lines for measurement.

6.5 Искључивање

To turn off the laser level, press the power button again. Always engage the pendulum lock before storing or transporting the device to protect the internal mechanism.

7. Одржавање

• Чишћење: Wipe the laser level with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the laser apertures are clean for optimal beam clarity.
• Складиштење: Store the device in its carrying pouch in a dry, cool place, away from direct sunlight. Always engage the pendulum lock before storage.
• Одржавање батерије: Remove batteries if the device will not be used for an extended period to prevent corrosion from battery leakage.
• Провера калибрације: Periodically check the calibration of your laser level. Refer to the full product manual or STANLEY FATMAX support for detailed calibration procedures if needed.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

STANLEY FATMAX products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official STANLEY FATMAX webсајт. Сачувајте рачун као доказ о куповини.

For further assistance, please contact STANLEY FATMAX customer service.