iBeam by Metra TEDGH Ram Tailgate Handle Camera User Manual

Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your iBeam by Metra TEDGH Ram Tailgate Handle Camera. This factory replacement tailgate handle camera is designed to enhance visibility behind your vehicle, offering a clear view for safer maneuvering and parking.

Производ је завршенview

The iBeam TEDGH camera integrates seamlessly into your Ram truck's tailgate handle, providing a discreet and factory-like appearance. It features advanced imaging capabilities for both day and night use.

• Висококвалитетна слика: Equipped with a 1/3 inch CMOS camera sensor for sharp and clear video output.
• Широко Viewугао угла: Нуди 150 степени viewing angle to capture a broad perspective behind the vehicle.
• Ноћни вид: Features 0.5 LUX night vision for improved visibility in low-light conditions.
• Defeatable Parking Lines: Includes on-screen parking guidelines that can be enabled or disabled as per user preference.
• Extended Harness: Comes with a 26-foot harness for flexible connection to an aftermarket radio or display (not included).

Шта је у кутији

Након отварања паковања производа, уверите се да су присутне све следеће компоненте:

• iBeam TEDGH Ram Tailgate Handle Camera unit
• 26-foot extension cable harness
• Кориснички приручник (овај документ)

Подешавање и инсталација

The iBeam TEDGH camera is designed for surface mount installation as a factory replacement tailgate handle. Professional installation is recommended.

Мере предострожности

• Disconnect the vehicle's battery before beginning installation to prevent electrical shorts.
• Ensure all wiring is routed away from moving parts, heat sources, and sharp edges.
• Проверите да ли су сви прикључци сигурни и правилно изоловани.
• This product is intended for use with a 12-volt DC power supply.

Кораци инсталације (Општи водич)

1. Remove Existing Tailgate Handle: Carefully remove the original tailgate handle from your Ram truck. Refer to your vehicle's service manual for specific instructions.
2. Install New Tailgate Handle Camera: Mount the iBeam TEDGH camera unit into the tailgate opening, ensuring it is securely fastened.
3. Ожичење руте: Route the 26-foot extension cable from the camera through the tailgate and chassis to the location of your aftermarket radio or display. Ensure the cable is protected from damage.
4. Повежи се са екраном: Connect the video output cable from the camera harness to the video input of your aftermarket radio or monitor.
5. Прикључак за напајање: Connect the power wires of the camera harness to a suitable 12-volt power source, typically the vehicle's reverse light circuit, so the camera activates when the vehicle is in reverse.
6. Тест функционалност: Reconnect the vehicle's battery and test the camera's operation. Engage reverse gear and verify that the camera image appears on your display.
7. Сигурно ожичење: Once confirmed operational, secure all wiring with zip ties or electrical tape to prevent rattling or damage.

Figure 1: The iBeam TEDGH Ram Tailgate Handle Camera, showing the integrated camera lens on the left side of the handle and the attached wiring harness on the right.

Figure 2: A closer front view of the iBeam TEDGH Ram Tailgate Handle Camera, highlighting the camera lens and the handle mechanism.

Упутство за употребу

The iBeam TEDGH camera operates automatically when the vehicle is placed into reverse gear, provided it is correctly wired to the reverse light circuit or a switched 12V source that activates with reverse.

• Аутоматско активирање: When you shift your vehicle into reverse, the camera will automatically display the rear view on your connected aftermarket monitor.
• Паркинг линије: The camera features integrated parking lines to assist with judging distance and alignment. These lines are defeatable, meaning they can be turned on or off. The method for defeating (enabling/disabling) parking lines typically involves cutting a specific wire loop on the camera harness during installation. Consult the wiring diagram provided with the product for exact instructions.
• Ноћни вид: The 0.5 LUX night vision capability allows for clear visibility even in very low light conditions, enhancing safety during nighttime parking or maneuvering.

Одржавање

To ensure optimal performance and longevity of your iBeam TEDGH camera, follow these simple maintenance guidelines:

• Очистите сочиво: Редовно чистите сочиво камере меком крпомamp cloth to remove dirt, dust, and debris that may obstruct the view. Avoid abrasive cleaners or materials that could scratch the lens.
• Прегледајте ожичење: Periodically check the wiring and connections for any signs of wear, fraying, or corrosion. Ensure all connections remain secure.
• Избегавајте прање под високим притиском: When washing your vehicle, avoid directing high-pressure water jets directly at the camera lens or housing, as this could potentially damage the seal or internal components.

Решавање проблема

If you encounter issues with your iBeam TEDGH camera, refer to the following common troubleshooting steps:

Спецификације

Информације о гаранцији

iBeam products are manufactured by Metra Electronics Corp. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Metra Electronics webсајт. Сачувајте доказ о куповини за потребе гаранције.

Корисничка подршка

Should you require further assistance, technical support, or have questions not covered in this manual, please contact Metra Electronics Corp. customer support. Contact information can typically be found on their official webсајту или на паковању производа.

Manufacturer: Metra Electronics Corp