Terminator TCL 1070 Cylinder Door Lock Instruction Manual

Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Terminator TCL 1070 Cylinder Door Lock. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.

Безбедносне информације

• Увек носите одговарајућу личну заштитну опрему, као што су заштитне наочаре, током инсталације.
• Ensure the door frame and door are structurally sound before installing the lock.
• Do not attempt to modify the lock cylinder or keys, as this may compromise security and void the warranty.
• Keep keys in a secure location and away from unauthorized access.

Садржај пакета

Проверите да ли се у вашем пакету налазе све ставке наведене у наставку:

• 1x Terminator TCL 1070 Cylinder Door Lock
• 3x Nickel Plated Keys
• 1x Fixing Screw

Слика 1: Contents of the Terminator TCL 1070 package, showing the brass cylinder lock, three nickel-plated keys, and the securing screw.

Упутство за инсталацију

Follow these steps to install your new cylinder door lock. Ensure you have the correct size cylinder for your door thickness.

1. Measure Your Existing Cylinder (if applicable): If replacing an old cylinder, remove the fixing screw located on the door's edge, below the latch. Insert the key into the cylinder and turn it slightly (about 15-20 degrees) to align the cam with the cylinder body. Carefully pull the cylinder out. Measure the length from the center of the fixing screw hole to each end of the cylinder. The TCL 1070 has dimensions of 35mm x 35mm (70mm total length).
2. Припремите врата: Ensure the mortise lock body is correctly installed in the door and the cylinder hole is clear.
3. Insert the New Cylinder: Insert one of the provided keys into the new Terminator TCL 1070 cylinder. Turn the key slightly to align the cam (the central rotating part) with the cylinder body.
4. Position the Cylinder: Slide the cylinder into the mortise lock opening from the side of the door. Ensure it is centered and flush with both sides of the door.
5. Обезбедите цилиндар: Insert the long fixing screw through the screw hole on the door's edge and into the threaded hole in the center of the cylinder. Tighten the screw firmly but do not overtighten.
6. Пробни рад: With the door open, insert a key from both sides and turn it to ensure smooth operation of the lock mechanism. The key should turn freely, and the cam should retract and extend without obstruction.

Слика 2: Детаљно view of the cylinder lock, highlighting the key entry point and the cam.

Слика 3: Врх view of the cylinder lock, indicating the position of the fixing screw hole.

Слика 4: The cylinder lock held in a hand, illustrating its approximate size and showing a length of 7 cm (3.1 inches).

Упутство за употребу

To operate the Terminator TCL 1070 Cylinder Door Lock:

1. Да закључате: Insert one of the provided keys into the keyhole. Turn the key clockwise until the deadbolt extends fully into the door frame. Remove the key.
2. За откључавање: Insert the key into the keyhole. Turn the key counter-clockwise until the deadbolt fully retracts into the door. Remove the key.

Ensure the key is fully inserted before turning to prevent damage to the key or the lock mechanism.

Одржавање

Regular maintenance helps ensure the smooth operation and longevity of your lock.

• подмазивање: Periodically (e.g., once a year), apply a small amount of graphite-based lubricant or a specialized lock lubricant into the keyway. Avoid using oil-based lubricants as they can attract dust and debris.
• Чишћење: Wipe the exterior of the lock cylinder with a soft, dry cloth to remove dust and grime. Do not use abrasive cleaners or solvents.
• Брига о кључевима: Avoid bending or damaging the keys. Store spare keys securely.

Решавање проблема

Спецификације

Слика 5: Packaging detail showing dimensions (35mm x 35mm) and model number TCL 1070.

Информације о гаранцији

Specific warranty details for the Terminator TCL 1070 Cylinder Door Lock are not provided in this manual. For warranty claims or information, please refer to the product packaging or contact the manufacturer directly.

Корисничка подршка

If you encounter any issues or have questions regarding your Terminator TCL 1070 Cylinder Door Lock that are not covered in this manual, please contact Terminator customer support through their official webсајт или продавницу где је производ купљен.