Laney A-Fresco-2 Acoustic Instrument Combo 60W User Manual

Увод

The Laney A-Fresco-2 is an ultra-compact acoustic instrument combo amplifier designed for versatility, portability, and reliability. Engineered in the UK, it features an ultra-efficient Class D power amplifier and a single 8-inch custom-designed full-frequency coaxial woofer. This combination delivers articulate, transparent acoustic sound with both punch and high-end clarity, faithfully reproducing your instrument's natural tone.

Ово amplifier operates on both mains power and internal rechargeable Li-Ion batteries, offering up to 24 hours of power for performances anywhere. With two independent channels, powerful EQ, and an auxiliary input, the A-Fresco-2 is suitable for various settings, from street performances to studio use.

Важне информације о безбедности

• Прочитајте упутства: Сачувајте ово упутство за будућу употребу.
• Извор напајања: Користите само наведени адаптер за напајање. Уверите се да је јачина звукаtagе одговара вашој локалној понуди.
• Вода и влага: Do not expose this appliance to rain or moisture. Do not use near water.
• вентилација: Не блокирајте отворе за вентилацију. Инсталирајте у складу са упутствима произвођача.
• топлота: Не постављајте у близини извора топлоте као што су радијатори, грејни регистри, пећи или други уређаји (укључујући ampлифиерс) који производе топлоту.
• Каблови: Заштитите кабл за напајање од гажења или прикљештења, посебно на утикачима, утичницама и на месту где излазе из уређаја.
• Сервисирање: Све сервисирање препустите квалификованом сервисном особљу. Сервисирање је потребно када је уређај оштећен на било који начин, као што је оштећен кабл за напајање или утикач, ако је течност проливена или су предмети упали у апарат, ако је апарат био изложен киши или влази, не ради нормално , или је одбачено.
• Безбедност батерије: The unit contains a rechargeable Li-Ion battery. Do not attempt to replace the battery yourself. Dispose of batteries according to local regulations.

Производ је завршенview

The Laney A-Fresco-2 is a 60-watt acoustic instrument combo amplifier featuring a single 8-inch dual-cone speaker. It includes on-board digital effects and an FX loop for enhanced sound shaping. The amplifier is designed for acoustic instruments and offers two independent channels for versatile input options.

Кључне карактеристике:

• 60 Watts of power output.
• 1 x 8-inch Dual Cone speaker for clear, full-range sound.
• On-board Digital FX (Reverb, Chorus).
• Integrated FX loop for external effects pedals.
• Two independent channels with dedicated EQ.
• Battery-powered operation with up to 24 hours of use.
• Помоћни улаз за повезивање екстерних аудио уређаја.

Image: Front side view of the Laney A-Fresco-2 Acoustic Instrument Combo ampспасилац, шоуasinг његов компактан дизајн и контролна табла.

Контроле и везе

Familiarize yourself with the various controls and connection points on your A-Fresco-2 ampлифиер.

Control Panel (Front/Side)

Image: Close-up of the Laney A-Fresco-2 control panel, showing knobs and input jacks.

• Волумен: Master volume control for the entire ampизлаз подизача.
• Искључи звук: Button to temporarily silence the ampизлаз подизача.
• Индикатор напајања: LED light indicating the power status of the unit.
• Anti-Feedback: Control to reduce or eliminate feedback.
• фаза: Button to invert the phase of the input signal, useful for feedback reduction or tonal shaping.
• Реверб: Effect control for adding reverberation to your sound. Each channel has an independent adjustment.
• Рефрен: Effect control for adding chorus to your sound. Each channel has an independent adjustment.
• Високи тонови: EQ control for adjusting high frequencies. Independent for each channel.
• средина: EQ control for adjusting mid frequencies. Independent for each channel.
• бас: EQ control for adjusting low frequencies. Independent for each channel.
• Облик: Tone shaping button or knob, offering a pre-set EQ curve. Independent for each channel.
• Ниво: Input gain control for each channel (CH1, CH2).
• вршни индикатор: LED light that illuminates when the input signal is too high, indicating potential clipping.
• Улаз канала 1: Combination XLR/TRS jack for connecting instruments or microphones.
• Улаз канала 2: Combination XLR/TRS jack for connecting instruments or microphones.

Прикључци задњег панела

Image: Rear panel of the Laney A-Fresco-2, showing various input/output jacks and power switch.

• Слушалице: 3.5mm stereo jack for connecting headphones.
• Аук Ин: 3.5mm stereo jack for connecting external audio sources like MP3 players or phones.
• ФКС Сенд: Output for sending signal to external effects units.
• Поврат девиза: Input for receiving signal from external effects units.
• даљински: Jack for connecting an optional footswitch (FS2-MINI) for remote control of functions.
• DI Out (XLR): Balanced XLR output for connecting to a PA system or recording console.
• ГНД Лифт: Switch to help eliminate hum caused by ground loops when using the DI Out.
• Извор: Switch to select the source for the DI Out (Pre-EQ/Post-EQ).
• Режим: Switch to select power mode (Normal/Eco).
• ДЦ улаз: Power input jack for the supplied AC adapter.
• Прекидач: Прекидач за укључивање/искључивање ampлифиер.
• Одељак за батерије: Access for the internal rechargeable Li-Ion battery.

Сетуп

Поверинг Он

1. Мрежно напајање: Connect the supplied AC adapter to the 'DC In' jack on the rear panel and plug it into a suitable wall outlet.
2. Снага батерије: The A-Fresco-2 has an internal rechargeable Li-Ion battery. Ensure it is charged before use. The unit can be used while charging.
3. Flip the 'Power' switch on the rear panel to the 'ON' position. The power indicator LED on the control panel will illuminate.

Connecting Your Instrument/Microphone

1. Осигурајте amplifier's 'Volume' control is set to minimum.
2. Connect your acoustic instrument or microphone to either the 'CH1 Input' or 'CH2 Input' using a standard 1/4-inch jack cable or an XLR cable.
3. If using an external audio source (e.g., MP3 player), connect it to the 'Aux In' jack using a 3.5mm stereo cable.

Using the FX Loop

To integrate external effects pedals:

1. Connect the 'FX Send' jack to the input of your external effects unit.
2. Connect the output of your external effects unit to the 'FX Return' jack.

Оперативни

Основна операција

1. After connecting your instrument, slowly increase the 'Level' control for the active channel until you reach a desired input level. The 'Peak' LED should only flash occasionally.
2. Gradually raise the 'Volume' control to achieve your overall desired output level.

Tone Shaping (EQ)

Use the 'Treble', 'Middle', and 'Bass' controls for each channel to adjust the tonal characteristics of your instrument. Experiment with these controls to find the sound that best suits your instrument and playing style. The 'Shape' button/knob provides a quick pre-set EQ curve.

Ефекти

• Реверб: Turn the 'Reverb' knob to add a sense of space and depth to your sound.
• Рефрен: Turn the 'Chorus' knob to add a shimmering, swirling effect to your sound.

Anti-Feedback and Phase

If you experience feedback, try adjusting the 'Anti-Feedback' control. The 'Phase' button can also help eliminate feedback, especially in live situations, by inverting the signal's phase.

Ецо Моде

The 'Mode' switch on the rear panel allows you to select between 'Normal' and 'Eco' modes. 'Eco' mode conserves battery power, extending the operational time when running on batteries.

Одржавање

Чишћење

За чишћење amplifier, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish. Ensure the unit is powered off and unplugged before cleaning.

Баттери Царе

The internal Li-Ion battery is designed for long life. To maximize battery lifespan:

• Избегавајте често потпуно пражњење батерије.
• Чувајте уређај на хладном и сувом месту када се не користи дуже време.
• If storing for a long time, ensure the battery is charged to approximately 50-70% capacity.
• Do not attempt to replace the battery yourself. Contact qualified service personnel if battery issues arise.

Решавање проблема

• Нема звука:
  • Проверите да ли је amplifier is powered on and the power indicator LED is lit.
  • Уверите се да су сви каблови безбедно повезани.
  • Verify that the 'Volume' and channel 'Level' controls are not set to minimum.
  • Check if the 'Mute' button is engaged.
  • Test with a different instrument or cable to rule out external equipment issues.
• Изобличен звук:
  • Reduce the channel 'Level' control if the 'Peak' LED is constantly lit.
  • Lower the overall 'Volume' control.
  • Проверите да ли има оштећених каблова.
• Зујање или шум:
  • Engage the 'GND Lift' switch on the rear panel if using the DI Out.
  • Ensure all power connections are secure and not near other electrical interference sources.
  • A slight amount of white noise may be present at higher volumes, which is common for some amplifiers and typically unnoticeable during playing.
• Батерија се не пуни:
  • Ensure the AC adapter is correctly connected and the wall outlet is functional.
  • Verify that the power adapter is the original supplied unit.

Спецификације

Гаранција и подршка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Laney Ampосвешћење webсајт. Сачувајте доказ о куповини за потребе гаранције.