1. Увод
This instruction manual provides essential information for the safe and effective use of your TROTEC Deep Well Pump TDP 7500 E. Please read this manual thoroughly before installation and operation to ensure proper function and to prevent damage or injury. Keep this manual in a safe place for future reference.
The TROTEC TDP 7500 E is a robust deep well pump designed for extracting clear water from wells, boreholes, and cisterns. Its slim design allows for installation in narrow boreholes, making it ideal for garden irrigation, domestic water supply, and other water transfer applications.
Figure 1: TROTEC Deep Well Pump TDP 7500 E with its external control box and power cable.
2. Безбедносна упутства
УПОЗОРЕЊЕ! Прочитајте сва безбедносна упозорења и сва упутства. Непоштовање упозорења и упутстава може довести до струјног удара, пожара и/или озбиљних повреда.
- електрична безбедност: Ensure the power supply matches the pump's specifications (230 V). Always disconnect the power supply before performing any work on the pump. The external control box is splash-proof (IP44) but should be protected from direct water exposure.
- Инсталација: The pump must be fully submerged during operation. Do not operate the pump dry. Ensure the borehole diameter is at least 11 cm for proper installation.
- Квалитет воде: This pump is designed for clear water. Do not pump flammable, corrosive, explosive, or abrasive liquids. The water temperature should not exceed 35°C.
- Деца и посматрачи: Држите децу и неовлашћена лица даље од радног простора.
- Одржавање: Only qualified personnel should perform repairs. Use only original spare parts.
- Заштита од преоптерећења: The integrated thermal protection circuit and overload switch protect the pump from damage due to overheating or overcurrent.
3. Укључене компоненте
The TROTEC Deep Well Pump TDP 7500 E package typically includes the following items:
- TROTEC Deep Well Pump TDP 7500 E (Stainless Steel)
- External Control Box with integrated overload switch
- Power Cable (approx. 20 meters)
- Non-return valve (integrated)
- Dirt screen (integrated, stainless steel)
- Упутство за употребу
4. Подешавање и инсталација
Follow these steps for proper installation of your deep well pump:
- Prepare the Borehole: Ensure the borehole has a minimum diameter of 11 cm to accommodate the pump (10 cm diameter). The maximum immersion depth is 20 meters.
- Connect the Discharge Pipe: Attach a 1 ¼" pipe to the high-quality brass thread outlet of the pump. Ensure a secure and watertight connection.
- Спустите пумпу: Carefully lower the pump into the well or borehole. Use a strong rope or cable attached to the designated eyelets on the pump head for support. Ensure the pump is suspended at least 0.5 meters from the bottom of the well to avoid drawing in sediment. The maximum immersion depth is 20 meters.
- Position the Control Box: Place the external control box in a dry, protected location, easily accessible for operation. The control box is splash-proof (IP44) but should not be exposed to heavy rain or direct water spray.
- Повежите се са напајањем: Plug the pump's power cable into the external control box, and then plug the control box into a suitable 230 V power outlet.
Figure 2: Dimensions of the pump, showing a length of 93 cm and a diameter of 10 cm.
Figure 3: Detail of the pump's brass connection for the discharge pipe.
Figure 4: Installation diagram showing minimum borehole diameter (11 cm), minimum distance from bottom (0.5 m), and maximum immersion depth (20 m).
Figure 5: The external control box, featuring power connections and safety warnings.
5. Операција
Operating the TROTEC Deep Well Pump TDP 7500 E is straightforward:
- Прво покретање: After installation, ensure all connections are secure and the pump is fully submerged.
- Укључено: Switch on the power using the switch on the external control box. The pump will begin to draw water.
- Надгледање: Observe the water flow. The pump has a maximum flow rate of 4800 liters per hour and can achieve a maximum pressure of 9.3 bar.
- Топлотна заштита: The integrated thermal protection circuit and overload switch will automatically shut off the pump if it overheats or experiences an electrical overload, preventing damage.
- Искључивање: To stop the pump, switch off the power at the control box.
Figure 6: The deep well pump in operation, providing water for garden irrigation.
6. Одржавање
Regular maintenance ensures the longevity and optimal performance of your pump:
- Cleaning the Dirt Screen: The pump features a stainless steel dirt screen that prevents particles larger than 2.3 mm from entering. Periodically inspect and clean the screen to ensure unrestricted water flow.
- Зимско складиштење: If the pump will not be used during freezing temperatures, remove it from the well, drain all water, and store it in a frost-free environment.
- Генерално чишћење: Clean the exterior of the pump and control box with a damp крпа. Не користите јаке детерџенте или раствараче.
- инспекција: Regularly check the power cable and connections for any signs of damage.
КСНУМКС. Решавање проблема
Ево неких уобичајених проблема и њихових могућих решења:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Пумпа се не покреће | Нема напајања Активирана заштита од преоптерећења Грешка мотора | Проверите прикључак за напајање и осигурач Allow pump to cool down, then reset overload switch on control box Контактирајте квалификовано сервисно особље |
| Pump runs but no water is delivered | Пумпа није потпуно потопљена Усисна линија блокирана Non-return valve stuck Ниво воде је пренизак | Ensure pump is fully immersed Check and clear any blockages in the pipe Inspect or replace non-return valve Wait for water level to rise or lower pump if possible |
| Low water pressure/flow | Екран прљавштине је зачепљен Discharge pipe leakage Pump wear | Clean the stainless steel dirt screen Check all pipe connections for leaks Contact qualified service personnel for inspection |
| Пумпа се неочекивано зауставља | Активирана заштита од преоптерећења Прекид струје | Allow pump to cool down, then reset overload switch Проверите напајање |
8. Техничке спецификације
| Феатуре | Спецификација |
|---|---|
| Број модела | 4610000215 |
| Бранд | ТРОТЕЦ |
| Извор напајања | Цордед Елецтриц |
| Волtage | 230 Волтс |
| Мак Флов Рате | 4800 литара на сат |
| Максимална висина подизања (Max Head) | 93 Meters (Max. delivery height) / 20 Meters (Max. immersion depth) |
| Мак Прессуре | 9.3 бара |
| Снага (Ватtage) | 1500 В |
| Материјал | нерђајући челик |
| Тежина артикла | 15.5 килограма |
| Димензије производа (Д к Ш к В) | 93 к 9.2 к 10 цм |
| Заштитна класа | IP68 (for pump) |
| Макс. Величина честица | 2.3 мм |
| Min. Borehole Diameter | 11 цм |
| Макс. Температура воде | Ночьу 35°Ц |
9. Гаранција и подршка
For warranty information, technical support, or service inquiries regarding your TROTEC Deep Well Pump TDP 7500 E, please refer to the official TROTEC website or contact their customer service directly. Details can typically be found on the product packaging or the manufacturer's official documentation.
Always ensure you have your product model number (TDP 7500 E or 4610000215) and proof of purchase available when contacting support.