EMANER 7042-WH

EMANER Model 7042-WH Dual-Head LED Security Light Instruction Manual

Модел: 7042-WH

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your EMANER Model 7042-WH Dual-Head LED Security Light. Please read this manual thoroughly before installation and retain it for future reference.

EMANER Dual-Head LED Security Light, front view with 120V warning label.

Фронт view of the EMANER Dual-Head LED Security Light, highlighting its two rotatable light heads and motion sensor. A 120V warning label is visible.

2. Безбедносне информације

УПОЗОРЕЊЕ: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes.

  • Ensure the power supply is 120V AC.
  • Не постављајте у близини запаљивих материјала.
  • This product is designed for outdoor use and is IP65 waterproof rated.
  • Консултујте квалификованог електричара ако нисте сигурни у процес инсталације.
  • Не гледајте директно у ЛЕД извор светлости када је осветљен.

3. Производ је готовview и компоненте

The EMANER Model 7042-WH is a dual-head LED security light featuring a rotatable design and multiple intelligent control modes. Key components include:

  • Rotatable Light Heads: Two adjustable LED light panels.
  • ПИР сензор покрета: Пасивни инфрацрвени сензор за детекцију покрета.
  • Контролни точкићи: For adjusting time delay and sensitivity.
  • Хардвер за монтажу: Includes mounting strap, screws, and wire nuts.
Technical drawing with dimensions of the EMANER Dual-Head LED Security Light.

A diagram providing precise measurements of the security light's length, width, height, and the dimensions of the rotatable light heads and PIR motion sensor.

4. Спецификације

ФеатуреСпецификација
БрандЕМАНЕР
Број модела7042-ВХ
БојаWhite Fixture
МатеријалABS Plastic + Aluminum internal
Тип извора светлостиЛЕД
Ватtage28 Ваттс
Осветљеност2800 лумена
Температура боје5000К Даилигхт Вхите
Волtage120 Волтс
Ниво отпорности на водуИП65 водоотпоран
Сенсинг Англе180 степени
Детецтион Дистанце20-70 feet (adjustable)
Тип монтажеWall mount, Eave/Soffit mount
Димензије производа9 cm D x 7.4 cm Š x 6.4 cm V
Тежина артикла1.74 фунти

5. Подешавање и инсталација

This LED security light is designed for easy installation. Follow these steps carefully:

5.1 Пре-инсталација

  • Искључите напајање: Disconnect power at the circuit breaker or fuse box before beginning installation.
  • Select mounting location: Choose a wall or eave/soffit location that provides the desired coverage and is within reach of existing wiring. Recommended mounting height is 6.5-12 feet.
  • Распакујте садржај: Ensure all components are present: light fixture, mounting strap, screws, and wire nuts.

5.2 Ожичење и монтажа

  1. Attach the mounting strap to your existing electrical outlet box using the provided screws.
  2. Повежите електричне жице:
    • Повежите црна (Live) wire from the fixture to the црна (Live) wire from the outlet box.
    • Повежите бела (Neutral) wire from the fixture to the бела (Neutral) wire from the outlet box.
    • Повежите зелени/голи бакар (Ground) wire from the fixture to the зелени/голи бакар (Ground) wire from the outlet box.
    Secure connections with wire nuts.
  3. Carefully tuck the wires into the outlet box.
  4. Align the light fixture with the mounting strap and secure it with the decorative cover and fixture mounting screw.
  5. Подесите главе светла и сензор покрета на жељене углове.
Diagram showing mounting instructions for the EMANER LED Security Light, including wiring and bracket installation.

Diagram for installing the security light, detailing wire connections, mounting strap, back plate, and attaching the light head and sensor.

Examples of EMANER LED Security Light mounted on an eave/soffit and on a wall.

Illustrations showing two common installation methods: mounting the light under an eave or soffit, and mounting it directly onto a wall.

6. Радни режими и подешавања

The security light features a control panel with dials for TIME and SENSITIVITY, and a slide switch for selecting operating modes. All modes operate only at night or in dark environments, automatically turning off at dawn.

Detailed diagram of the EMANER LED Security Light's smart switch and infrared sensing settings, explaining each mode.

An infographic explaining the various operating modes: TEST, AUTO, Motion Sensor, 6 Hours, and Dusk to Dawn (PC) modes, along with their respective time delay and sensitivity settings.

6.1 Контролна табла прекоview

Close-up of the EMANER LED Security Light's control panel with TIME and SENSITIVITY dials.

Детаљно view of the control panel, showing the 'TIME' dial (5S, 3MIN, TEST) and 'SENSITIVITY' dial (+/-) for adjusting light duration and motion detection range.

  • TIME Dial: Adjusts how long the light stays on after motion is detected (5 seconds to 3 minutes). The 'TEST' setting is for initial setup.
  • SENSITIVITY Dial: Adjusts the motion sensor's detection range (Low to High sensitivity, 20-70 feet).
  • Mode Slide Switch: Selects between AUTO, OFF (Motion Sensor), 6H (6 Hours), and PC (Dusk to Dawn Stay On) modes.
Diagram illustrating the 120-degree sensing angle and 20-39ft detection distance of the EMANER LED Security Light.

An illustration demonstrating the motion sensor's 120-degree sensing angle and adjustable detection distance of 20-39 feet (6-12 meters) from a mounting height of 6.5-12 feet.

6.2 Режими рада

  • ТЕСТ режим: (Slide switch to 'TEST' on TIME dial) This mode is for testing after installation. When connected to AC power, the light will turn on for 5 seconds based on the time delay setting.
  • AUTO Dim Light Mode: (Slide switch to 'AUTO') The security light turns on with dim light at dusk. When motion is detected, it switches to 100% brightness. After no motion is detected for the set time delay (5 seconds to 3 minutes), it returns to dim light. Automatically turns off at dawn.
  • Motion On/Off Mode: (Slide switch to 'OFF') The security flood light only turns on at 100% brightness when motion is activated. It automatically turns off when no motion is detected for the set time delay. Automatically turns off at dawn.
  • 6 Hours Mode: (Slide switch to '6H') The flood light turns on at 100% brightness and stays on for 6 hours. After 6 hours, it automatically switches to 'AUTO Dim Light Mode'. Automatically turns off at dawn.
  • Dusk to Dawn Stay On Mode (PC Mode): (Slide switch to 'PC') The motion security light turns on with bright light (100% brightness) and stays on all night. It automatically turns off in the daytime.

7. Одржавање

Regular maintenance ensures optimal performance and longevity of your EMANER LED Security Light.

  • Чишћење: Периодично чистите главе светла и сочиво сензора покрета меком крпомamp тканина. Немојте користити абразивна средства за чишћење или раствараче.
  • инспекција: Годишње проверавајте ожичење и монтажу да ли постоје знаци хабања, оштећења или лабавих спојева.
  • Нема делова које корисник може сервисирати: The LED light source is non-removable and not user-serviceable. Do not attempt to open the light heads.

КСНУМКС. Решавање проблема

Ако наиђете на проблеме са безбедносним светлом, погледајте следеће уобичајене проблеме и решења:

ПроблемМогући узрокРешење
Светло се не укључује ноћу.1. Напајање је искључено.
2. Photocell sensor is detecting ambient light.
3. Проблем са ожичењем.		1. Проверите осигурач/прекидач.
2. Ensure the sensor is not obstructed or exposed to other light sources.
3. Verify all wiring connections are secure.
Светло остаје укључено непрекидно.1. Mode set to 'PC' (Dusk to Dawn Stay On).
2. Constant motion detected.
3. Wiring error.		1. Change mode to 'AUTO' or 'OFF'.
2. Adjust sensor sensitivity or angle to avoid constant triggers.
3. Поново проверите ожичење.
Light flashes or cycles on/off rapidly.1. Intermittent power supply.
2. Sensor interference.
3. Faulty unit.		1. Check power connections.
2. Ensure no objects are moving within the sensor's range.
3. Контактирајте корисничку подршку ако проблеми и даље постоје.
Сензор покрета не детектује.1. Прениска осетљивост.
2. Sensor obstructed or misaligned.
3. Temperature too high (reduces PIR effectiveness).		1. Increase SENSITIVITY setting.
2. Clear obstructions and adjust sensor angle.
3. This is normal behavior in very hot weather.

9. Информације о гаранцији

The EMANER Model 7042-WH LED Security Light comes with a Двогодишња гаранција произвођачаОва гаранција покрива недостатке у материјалу и изради при нормалној употреби. Молимо вас да сачувате доказ о куповини за потребе подношења захтева за гаранцију.

10. Корисничка подршка

For technical assistance, warranty claims, or any questions regarding your EMANER product, please contact EMANER customer service. You can typically find contact information on the product packaging or through the retailer where the product was purchased.

Alternatively, you may visit the official EMANER brand store online or use the 'Ask a question' feature on the product's retail page.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.