1. Увод и преглед производаview
Thank you for choosing the Stayer Professional Telescopic Miter Saw SCR 315 W. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before initial use and keep it for future reference.
This powerful 1800W miter saw is designed for precision cutting with a large capacity, capable of cutting materials up to 370 mm in length and 120 mm in height. Its belt-driven transmission significantly reduces noise and improves work quality. The robust yet lightweight aluminum base ensures stability and durability.
Слика 1.1: Готовоview of the Stayer Professional Telescopic Miter Saw SCR 315 W.
2. Безбедносна упутства
Увек се придржавајте основних мера предострожности како бисте смањили ризик од пожара, струјног удара и повреда. Држите ово упутство при руци за брзу употребу.
Општа безбедносна правила:
- Увек носите одговарајућу личну заштитну опрему (ЛЗО), укључујући заштитне наочаре, заштиту за слух и маску за прашину.
- Уверите се да је радни простор чист, добро осветљен и без препрека.
- Држите подаље децу и особе у близини док радите са тестером.
- Не користите електричне алате у експлозивној атмосфери, као што је присуство запаљивих течности, гасова или прашине.
- Secure the workpiece firmly before cutting. Never hold small pieces by hand.
- Ensure the blade guard is always in place and functioning correctly.
- Искључите тестеру из извора напајања пре него што извршите било каква подешавања, замену додатне опреме или обављате одржавање.
- Use only sharp, clean blades of the correct size and type for the material being cut.
- Избегавајте незгодне положаје руку. Увек одржавајте правилан став и равнотежу.
3. Components and Key Features
Familiarize yourself with the various parts of your miter saw to ensure safe and effective operation.
Image 3.1: Labeled diagram of the miter saw components.
- Транспортна ручка: For safe and easy carrying of the saw.
- Belt Motor: 1800W motor with belt transmission for quiet and efficient operation.
- Telescopic Rail: Allows for extended cutting capacity up to 370mm.
- Вертицал Цлamp: Secures the workpiece for stable cutting.
- Tilting Head: Adjustable from -45° to +45° for bevel cuts in both directions.
- Extendable Support: Пружа додатну подршку за дуже радне предмете.
- Adjustable Rotary Table: Allows for precise miter angle adjustments (0°/22.5°/45°).
- гумене ноге: Ensures stability and reduces vibration during operation.
- Ласерски водич: Provides a precise cutting line for improved accuracy.
Image 3.2: Additional features and technical data overview.
4. Подешавање
Although the saw comes largely pre-assembled, some setup is required before first use.
Распакивање и постављање:
- Пажљиво извадите тестеру и сав прибор из паковања.
- Inspect the saw for any shipping damage. Do not operate if damaged.
- Place the saw on a stable, level workbench or stand that can support its weight (approx. 19 kg) and the workpiece. Ensure sufficient space around the saw for safe operation and material handling.
- Ensure the rubber feet are securely positioned to prevent movement.
Почетна подешавања:
- Verify that all locking mechanisms for the miter table, bevel head, and telescopic rail are functioning correctly.
- Check the alignment of the blade with the miter scale and laser guide. Adjust if necessary according to the calibration section (if applicable in a detailed manual).
- Connect the saw to a suitable power outlet (220V AC).
Слика 4.1: View of the miter table and fence, ready for setup.
5. Упутство за употребу
Follow these steps for safe and effective operation of your miter saw.
Basic Cutting Procedure:
- Припремите радни комад: Mark your desired cut line on the material.
- Подесите подешавања: Set the desired miter angle on the rotary table and the bevel angle on the tilting head. Secure all locking levers.
- Позиција радног комада: Place the workpiece firmly against the fence and the saw table. Use the vertical clamp to secure it. Ensure the material is fully supported, using the extendable supports if needed.
- Align Cut: Lower the saw head slightly (without starting the motor) to align the blade with your marked cut line. Use the laser guide for precise alignment.
- Покрените тестеру: Ensure your hands are clear of the blade path. Press the power switch to start the motor. Allow the blade to reach full speed before beginning the cut.
- Направи рез: Slowly and steadily lower the saw head through the workpiece. For telescopic cuts, push the saw head forward along the rail as you cut.
- Комплетан рез: Once the cut is complete, release the power switch and allow the blade to stop completely before raising the saw head.
- Уклоните радни комад: Carefully remove the cut material and any off-cuts.
Image 5.1: The miter saw in action, demonstrating a cut.
Слика 5.2: Крупни план view of the cutting process, showing the laser guide.
6. Одржавање
Редовно одржавање осигурава дуготрајност и оптималне перформансе ваше угаоне тестере.
Чишћење:
- After each use, disconnect the saw from power and clean off sawdust and debris using a brush or vacuum cleaner.
- Pay special attention to the blade guard, miter scale, and telescopic rails to ensure smooth operation.
- The dust collection system is designed to minimize sawdust, but regular cleaning of the dust bag/port is essential.
Blade Care and Replacement:
- Regularly inspect the saw blade for sharpness, cracks, or missing teeth. A dull blade can cause kickback and poor cut quality.
- When replacing the blade, ensure the saw is unplugged. Follow the instructions in your saw's specific blade replacement guide. Use only blades with a 315mm diameter and appropriate arbor size.
Преглед појасева:
- Periodically inspect the drive belt for wear, cracks, or slippage. A worn belt can affect performance and increase noise.
- Refer to the service manual for instructions on belt replacement if necessary.
Image 6.1: Close-up of the blade and guard, important for maintenance checks.
КСНУМКС. Решавање проблема
Овај одељак се бави уобичајеним проблемима на које можете наићи са вашом угаоном тестером.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Тестера се не покреће | Нема струје, неисправан прекидач, проблем са мотором | Check power connection, circuit breaker. If problem persists, contact service. |
| Лош квалитет реза (груб, цепање) | Dull blade, incorrect blade for material, improper feed rate, workpiece not secure | Replace or sharpen blade. Use appropriate blade. Adjust feed rate. Secure workpiece firmly. |
| Прекомерне вибрације или бука | Loose blade, worn belt, damaged bearings, unstable setup | Check blade tightness. Inspect belt for wear. Ensure saw is on a stable surface. If severe, seek professional service. |
| Laser guide not accurate | Misalignment, dirty laser lens | Clean laser lens. Refer to specific instructions for laser calibration (if available). |
| Сакупљање прашине је неефикасно | Dust bag full, clogged port, improper connection | Empty dust bag. Clear any clogs in the dust port. Ensure connections are secure. |
| Play/wobble in saw head or table | Loose components, manufacturing defect | Check for any accessible tightening points. If significant play affects accuracy or safety, contact customer support. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Stayer customer support.
8. Техничке спецификације
Detailed specifications for the Stayer Professional Telescopic Miter Saw SCR 315 W.
| Спецификација | Валуе |
|---|---|
| Број модела | 1.1933 |
| Произвођач | СТАИЕР |
| Извор напајања | Цордед Елецтриц |
| Волtage | 220 волти (АЦ) |
| Повер | 1800 Ваттс |
| Брзина | 3500 РПМ |
| Бладе Материал | Aluminum Oxide (typical for general purpose blades) |
| Посебна карактеристика | Silent (Belt Drive) |
| Тежина артикла | 19 килограма |
| Димензије пакета | 95 к 55 к 55 цм |
| Cutting Capacity (Length) | До 370 мм |
| Капацитет сечења (висина) | До 120 мм |
9. Гаранција и подршка
For warranty information, please refer to the warranty card or documentation included with your purchase. Warranty terms and conditions may vary by region and retailer.
If you require technical assistance, spare parts, or have questions regarding the operation or maintenance of your Stayer Professional Telescopic Miter Saw, please contact Stayer customer support or your authorized dealer. Have your model number (1.1933) and purchase details ready when contacting support.