Silex DS-600-US Gigabit USB 3.0 Device Server Instruction Manual

1. Увод

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the Silex DS-600-US Gigabit USB 3.0 Device Server. The DS-600-US allows USB devices to be shared over a network, enabling multiple users to access USB devices remotely.

2. Безбедносне информације

• Always use the power adapter supplied with the device. Using an incorrect adapter may cause damage or fire.
• Не излажите уређај води, влази или екстремним температурама.
• Осигурајте одговарајућу вентилацију око уређаја како бисте спречили прегревање.
• Не покушавајте сами да отворите или поправите уређај. Све сервисирање препустите квалификованом особљу.
• Држите уређај даље од јаких електромагнетних поља.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• Silex DS-600-US Gigabit USB 3.0 Device Server
• АЦ адаптер
• Етхернет Цабле
• Водич за брзи почетак (ово упутство)
• ЦД са софтвером (или упутства за преузимање)

4. Подешавање

4.1 Физичка веза

1. Повежите мрежни кабл: Connect one end of the Ethernet cable to the LAN port on the DS-600-US and the other end to your network router or switch.
2. Повежите УСБ уређаје: Plug your USB devices (e.g., printer, scanner, external hard drive) into the USB 3.0 ports on the DS-600-US.
3. Прикључите напајање: Plug the AC power adapter into the DC IN port on the DS-600-US, then plug the adapter into a power outlet. The power LED on the device server will illuminate.

Слика 1: Предњи и задњи део view of the Silex DS-600-US Device Server, showing the USB 3.0 ports, Ethernet port, and power input.

4.2 Инсталација софтвера

To access USB devices connected to the DS-600-US, you must install the Silex SX Virtual Link software on your computer.

1. Insert Software CD: If provided, insert the software CD into your computer's CD/DVD drive. Alternatively, download the latest software from the official Silex Technology webсајт (ввв.силектецхнологи.цом).
2. Покрените инсталер: Пронађите и покрените инсталатер file (нпр. „setup.exe“).
3. Пратите упутства на екрану: Follow the instructions provided by the installation wizard. You may need to restart your computer after installation.

5. Operating the Device Server

5.1 Connecting to USB Devices

1. Launch SX Virtual Link: Open the SX Virtual Link software on your computer.
2. Select Device Server: The software will display a list of available Silex device servers on your network. Select your DS-600-US.
3. Повежите УСБ уређај: The software will show the USB devices connected to the DS-600-US. Select the desired USB device and click the 'Connect' button. The device will now appear as if it is directly connected to your computer.

5.2 Disconnecting USB Devices

To disconnect a USB device from your computer and make it available to other users or for safe removal:

• In the SX Virtual Link software, select the connected USB device.
• Click the 'Disconnect' button.

Напомена: Always disconnect USB storage devices safely through your operating system before disconnecting them via SX Virtual Link to prevent data loss.

6. Одржавање

6.1 Ажурирања фирмвера

Periodically check the Silex Technology webсајт за ажурирања фирмвера. Ажурирања фирмвера могу побољшати перформансе, додати нове функције или поправити грешке. Пажљиво пратите упутства која су дата уз пакет за ажурирање фирмвера.

6.2 Чишћење

Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays, as they may damage the device.

КСНУМКС. Решавање проблема

7.1 Device Server Not Detected

• Ensure the DS-600-US is powered on and the power LED is illuminated.
• Verify the Ethernet cable is securely connected to both the device server and your network router/switch.
• Check your network settings to ensure your computer is on the same network segment as the device server.
• Temporarily disable any firewall software on your computer to see if it is blocking communication.

7.2 USB Device Not Connecting

• Ensure the USB device is properly plugged into the DS-600-US.
• Verify that the USB device is powered on, if it requires external power.
• Try connecting a different USB device to confirm the port on the DS-600-US is functional.
• Restart the SX Virtual Link software and try again.
• Restart the DS-600-US by unplugging and re-plugging the power adapter.

8. Спецификације

9. Гаранција и подршка

The Silex DS-600-US Device Server comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Silex Technology webсајту.

For technical support, driver downloads, firmware updates, and frequently asked questions, please visit the Silex Technology support page:

www.silextechnology.com/support

When contacting support, please have your product model (DS-600-US) and serial number ready.