1. Увод и крајview
The Cisco 561 Wireless Mono Headset is designed for professional use, offering clear audio and wireless freedom. This headset features DECT 6.0 technology for an extended operating range and is optimized for use with Cisco IP Phones, Cisco Jabber, and Webex devices. Its lightweight, over-the-head design ensures comfort during prolonged use, while the uni-directional microphone provides excellent voice clarity.
Image 1.1: The Cisco 561 Wireless Mono Headset, showcasing its sleek design and single earpiece.
2. Упутства за подешавање
Follow these steps to set up your Cisco 561 Wireless Mono Headset and its standard base station.
- Распакујте компоненте: Carefully remove the headset, base station, power adapter, and any included cables from the packaging.
- Прикључите напајање: Plug the power adapter into the base station and then into a power outlet. The base station's indicator lights should illuminate.
- Повежите се са уређајем:
- For Cisco IP Phones: Connect the base station to your Cisco IP Phone using the appropriate USB-A or RJ-9/AUX cable. Refer to your phone's manual for specific port locations.
- For Computers/Webex Devices: Connect the base station to your computer's USB-A port.
- Пуњење слушалица: Place the headset onto the base station's charging cradle. Ensure it is seated correctly. The charging indicator on the base or headset will show charging status. Allow the headset to fully charge before first use (approximately 2-3 hours for a full charge).
- Pair Headset (if not pre-paired): Most headsets are pre-paired. If pairing is required, consult the base station's specific pairing button and the headset's power button for instructions. Typically, you press and hold the pairing button on the base until an indicator light flashes, then power on the headset near the base.
Image 2.1: The Cisco 561 Headset placed on its standard base station, ready for charging and connection.
Video 2.1: An official video demonstrating the features and setup of the Cisco Headset 500 Series, which includes the 561 model.
3. Упутство за употребу
Understand how to use your Cisco 561 Headset for calls and audio.
- Ношење слушалица: Adjust the headband for a comfortable fit over your head. Position the microphone boom approximately two finger-widths from the corner of your mouth for optimal voice pickup. The headset is monaural, meaning it covers one ear.
- Укључивање/искључивање: Press and hold the power button on the headset for a few seconds to turn it on or off. An audible prompt or indicator light will confirm the status.
- Одговарање / завршавање позива: Press the Call Control button on the headset or base station to answer an incoming call or end an active call.
- Подешавање јачине звука: Use the volume up (+) and volume down (-) buttons on the headset or the volume dial on the base station to adjust listening volume.
- Искључивање микрофона: Press the Mute button on the headset or base station to mute or unmute your microphone during a call. An indicator light on the microphone boom or base may show mute status.
- Out-of-Range Warning: If you move beyond the 300 ft operating range, you may hear an audible warning. Move closer to the base station to restore connection.
- Трајање батерије: The headset provides up to 9 hours of talk time on a full charge. Place it on the base station when not in use to keep it charged.
Image 3.1: A user wearing the Cisco 561 Headset, demonstrating its comfortable fit for communication.
4. Одржавање
Правилно одржавање осигурава дуготрајност и оптималне перформансе ваших слушалица.
- Чишћење: Use a soft, dry, anti-static cloth to clean the headset and base station. Do not use liquid cleaners or aerosols directly on the device.
- Складиштење: When not in use, store the headset on its base station to keep it charged and protected. Avoid storing in extreme temperatures or direct sunlight.
- Одржавање батерије: For best battery life, avoid fully discharging the headset frequently. Charge it regularly, even if not completely depleted.
- Јастучићи за уши: Periodically check ear cushions for wear and tear. Replacement cushions may be available from Cisco support.
КСНУМКС. Решавање проблема
If you encounter issues with your Cisco 561 Headset, refer to the following common problems and solutions.
| Проблем | Могуће решење |
|---|---|
| Нема звука из слушалица |
|
| Микрофон не ради |
|
| Слушалице се не упарују |
|
| Limited wireless range |
|
| Слушалице се не пуне |
|
6. Спецификације
Key technical specifications for the Cisco 561 Wireless Mono Headset.
- Број модела: CP-HS-WL-561-S-US
- Технологија повезивања: Бежични
- Бежична технологија: ДЕЦТ 6.0
- Бежична радна удаљеност: До 300 стопа (91 метара)
- Режим звука: Моно
- Maximum Frequency Response: 48 кХз
- Положај уха: On Ear (Supra-aural)
- Фактор форме: Over-The-Head, Monaural
- Тип микрофона: Uni-Directional, Electret, Condenser
- Тип контроле: Call Control, Touch (on-ear controls)
- Контрола буке: Звучна изолација
- Просечан век трајања батерије: До 9 сати разговора
- Компатибилни уређаји: Cisco IP Phones with USB-A and/or RJ-9/AUX ports (e.g., 6851/6871/6900/7800/8800 models), Cisco Jabber/Webex devices/computers with USB-A ports
- Тежина артикла: 16 унце (приближно 453 грама)
- Материјал: Кожа (јастучићи за уши)
7. Гаранција и подршка
Your Cisco 561 Wireless Mono Headset comes with a limited warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official Cisco webсајту.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Cisco customer support through their official channels. You can typically find support contact information on the Cisco webсајту или унутар паковања вашег производа.
Важно: Keep your proof of purchase and product serial number handy when contacting support.