ИКА 0020003957

IKA Oven 125 Basic Dry Oven - Glass Door

Упутство за употребу

1. Увод

This manual provides essential information for the safe and efficient operation, installation, and maintenance of the IKA Oven 125 Basic Dry Oven with Glass Door. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent potential hazards.

The IKA Oven 125 Basic Dry Oven is designed for tempering, drying, aging, and heating applications in laboratory environments, suitable for use in industry, educational institutions, research, and quality control.

IKA Oven 125 Basic Dry Oven with Glass Door

Слика 1: IKA Oven 125 Basic Dry Oven with Glass Door. This image displays the front view of the oven, highlighting its digital control panel and the transparent glass door, which allows for visual monitoring of sampлес унутра.

2. Безбедносне информације

Observe all safety precautions to prevent injury and damage to the equipment. This oven is intended for professional use only.

2.1 Општа безбедност

  • Always operate the oven on a stable, level, and non-combustible surface.
  • Обезбедите одговарајућу вентилацију око уређаја како бисте спречили прегревање.
  • Do not operate the oven in explosive atmospheres or with explosive substances.
  • Wear appropriate personal protective equipment (PPE), such as heat-resistant gloves, when handling hot materials or surfaces.
  • Keep the area around the oven clear of flammable materials.

2.2 Електрична сигурност

  • Connect the oven only to a grounded power outlet with the correct voltagе и фреквенција.
  • Do not use extension cords or adapters unless absolutely necessary and rated for the oven's power requirements.
  • Inspect the power cord regularly for damage. Do not operate the oven with a damaged cord.
  • Искључите напајање пре обављања било каквог одржавања или чишћења.

2.3 Temperature Safety

  • The oven operates at high temperatures (up to 250°C). Surfaces will be hot. Avoid direct contact.
  • Allow the oven to cool down completely before opening the door for an extended period or performing maintenance.
  • Do not place items directly on the oven floor; always use shelves.
  • Monitor the temperature display to ensure it is within safe operating limits for your application.

3. Подешавање

3.1 Распакивање

  1. Пажљиво извадите пећницу из амбалаже.
  2. Inspect the unit for any visible damage incurred during transit. Report any damage to the carrier and supplier immediately.
  3. Remove all packing materials from inside the oven chamber and from the exterior.
  4. Сачувајте оригинално паковање за будући транспорт или складиштење.

3.2 Постављање

  • Place the oven on a sturdy, level, and heat-resistant workbench or floor.
  • Ensure there is sufficient clearance (at least 10 cm) around all sides of the oven for proper air circulation and heat dissipation.
  • Avoid placing the oven near heat sources, direct sunlight, or in areas with excessive drafts.
  • The ambient temperature should be within the specified operating range (typically 5°C to 40°C).

3.3 Електрични прикључак

  • Before connecting, verify that the local power supply matches the voltagе и фреквенција наведена на плочици са карактеристикама пећнице.
  • Укључите кабл за напајање у правилно уземљену електричну утичницу.
  • Ensure the power switch on the oven is in the "OFF" position before connecting to power.

4. Упутство за употребу

The IKA Oven 125 Basic features a clear display and control menu for intuitive operation.

4.1 Укључивање/искључивање

  • To power on, flip the main power switch located on the control panel to the "ON" position. The display will illuminate.
  • Да бисте искључили напајање, пребаците главни прекидач у положај „ИСКЉУЧЕНО“.

4.2 Подешавање температуре

  1. Press the "Set" button (refer to the control panel diagram in the full manual for exact button location).
  2. Use the up/down arrow keys to adjust the desired temperature. The temperature range is from RT + 5°C to 250°C.
  3. Press "Set" again to confirm the new temperature. The oven will begin heating to the set point.

4.3 Adjusting Ventilation

The oven features electronically adjustable ventilation for precise control over the drying process.

  • Access the ventilation settings through the control menu.
  • Use the arrow keys to increase or decrease the fan speed or vent opening percentage.
  • Confirm your selection to apply the changes.

4.4 Функција тајмера

The integrated timer allows for timed operations.

  • Navigate to the timer settings in the control menu.
  • Set the desired duration for the heating cycle.
  • Once the timer expires, the oven will either switch off or enter a standby mode, depending on configuration.

4.5 Функција закључавања тастера

To prevent accidental changes to settings, the control panel can be locked.

  • Activate the key lock function via the control menu.
  • To unlock, follow the instructions displayed on the screen or refer to the full manual.

4.6 USB Control and Data Logging

The IKA Oven 125 Basic can be controlled via USB, allowing for remote operation and recording of test parameters for further analysis.

  • Connect the oven to a computer using a standard USB cable.
  • Install the appropriate IKA software (available from the manufacturer's website) on your computer.
  • Follow the software instructions for controlling the oven and logging data.

5. Одржавање

Regular maintenance ensures the longevity and optimal performance of your IKA Oven 125 Basic.

5.1 Чишћење

  • Екстеријер: Обришите спољашње површине меком, дamp cloth and a mild detergent. Avoid abrasive cleaners or solvents.
  • Ентеријер: Ensure the oven is cool and disconnected from power. Remove shelves and clean the interior chamber with a soft cloth and mild, non-corrosive cleaning agent. Rinse with distilled water and dry thoroughly.
  • Стаклена врата: Clean the glass door with a glass cleaner. Avoid scratching the surface.
  • Do not spray cleaning agents directly into the control panel or ventilation openings.

5.2 Редовне провере

  • Повремено проверавајте кабл за напајање да ли има знакова хабања или оштећења.
  • Ensure the door seal is intact and free of debris to maintain proper insulation.
  • Verify that ventilation openings are not obstructed.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter. For problems not listed here, contact IKA customer support.

ПроблемМогући узрокРешење
Oven does not power on.No power supply; power cord disconnected; main switch off.Check power connection; ensure main switch is on; check circuit breaker.
Oven not heating to set temperature.Incorrect temperature setting; door not fully closed; faulty heating element.Verify temperature setting; ensure door is sealed; contact service if heating element is suspected.
Температурне флуктуације.Poor door seal; external drafts; sensor issue.Check door seal; relocate oven away from drafts; contact service for sensor check.
Дисплеј приказује код грешке.Internal fault; sensor error.Note the error code and consult the full IKA manual or contact customer support.

7. Спецификације

Technical data for the IKA Oven 125 Basic Dry Oven.

МоделIKA Oven 125 Basic Dry Oven
Број модела ставке0020003957
Температурни опсегRT + 5°C to 250°C
Капацитет125 литара
ВентилацијаЕлектронски подесива
КонтролаClear display and control menu, USB controllable
КарактеристикеKey lock function, Timer, Adjustable temperature limit, Glass door
Димензије производа48 к 40 к 52 инча
ПроизвођачИКА

8. Гаранција и подршка

For warranty information, please refer to the documentation provided with your purchase or visit the official IKA website. IKA products typically come with a manufacturer's warranty covering defects in materials and workmanship.

For technical support, spare parts, or service inquiries, please contact your local IKA distributor or the IKA customer service department. Ensure you have your model number (0020003957) and serial number ready when contacting support.

IKA Contact Information:
Please visit the official IKA webсајт за најновије контакт информације и ресурсе за подршку.

© 2023 IKA. Сва права задржана. Информације се могу променити без претходне најаве.

Повезани документи - 0020003957

Преview IKA PEN Electronic Pipette: User Manual and Operating Guide
Comprehensive user manual for the IKA PEN series of electronic pipettes, covering operation, installation, maintenance, and technical specifications for precise liquid handling in laboratory environments.
Преview ИКА МВП 10 басиц Вакуум-Мембранпумпе: Бедиенунгсанлеитунг унд тецхнисцхе Датен
Умфассенде Бедиенунгсанлеитунг фур дие ИКА МВП 10 басиц Вакуум-Мембранпумпе. Ентхалт Сицхерхеитсхинвеисе, тецхнисцхе Датен, Вартунг унд Фехлербехебунг фур Лаборанвендунген.
Преview IKA упутство за употребу аспиратора: инсталација, рад и одржавање
Свеобухватно упутство за употребу за IKA аспираторе, укључујући моделе IKA-LEXINGTON, IKA-MINICH, IKA-BADEN и IKA-DRESDEN. Ово упутство обухвата основне мере предострожности, детаљне спецификације, листе паковања, дијаграме производа, методе инсталације, електричне шеме, упутства за употребу, савете за одржавање и савете за решавање проблема.
Преview IKA RCT основна безбедносна контрола и HCT основна безбедносна контрола Упутство за употребу
Детаљно упутство за употребу за IKA RCT основне безбедносне контроле и HCT основне безбедносне контроле лабораторијских уређаја за грејање и мешање. Садржи безбедносна упутства, упутства за рад, одржавање, кодове грешака и техничке податке.
Преview IKA A11 основна упутства за употребу
Свеобухватно упутство за употребу основног аналитичког млина IKA A11, са детаљним описом његове употребе, одржавања, безбедности и техничких спецификација за лабораторијске примене.
Преview IKA Laboratory Mills: Batch, Inline, and Tube Grinding Solutions
Comprehensive guide to IKA laboratory mills, including Batch, Inline, and Tube mill series. Details features, technical specifications, operation, and accessories for efficient sample preparation in scientific and industrial environments.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.